The Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4" input with phantom power, two balanced 1/4" monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.
Desktop USB audio interface with low-noise Class-A discrete preamplifier
Sampling rate of up to 96kHz/24-bit
One combo XLR-1/4" combo input
Two balanced 1/4" monitor outputs
One discrete, studio-quality headphone output
Phantom power for condenser microphones
Zero-latency monitor mode
USB bus powered
USB Type-C connector for future proof operation
Rugged body with Satin Black Finish
Class compliant”no drivers required
Includes Ableton Live Lite
Includes USB cable
###
Interface
Max Sample Rate/Resolution
96 kHz / 24-Bit
Connectivity
Host Connection
USB Type-C
Analog I/O
1 x Combo XLR / 1/4" Input2 x 1/4" (6.3 mm) Balanced Output1 x 1/4" (6.3 mm) TRS Headphone Output
Phantom Power
+48 V
Digital I/O
None
MIDI I/O
None
Performance
Frequency Response
20 Hz to 20 kHz ±1 dB
Gain Range
Inputs:0 to 45 dB
Max Output Level
Monitor Outputs:-6 dBu
Headphone Output Power
24 mW into 32 Ohms245 mW into 300 Ohms
Dynamic Range
104 dBu
Impedance
Hi-Z Inputs:0.9 MOhm Mic Inputs:1.3 kOhms
EIN
-128 dBA
Digital Audio
Sample Rates
44.1, 48, 88.2, and 96 kHz
Bit Depth
24-Bit
Latency
Zero-Latency Direct Monitoring
Compatibility
OS Compatibility
macOS 10.10 or LaterWindows 7 or Later
Physical
Dimensions
3.9 x 4.9 x 1.5" / 100 x 124 x 38 mm
Weight
19.8 oz / 561.3 g
Packaging Info
Package Weight
1.155 lb
Box Dimensions (LxWxH)
7 x 5.1 x 2.55"
The Rode Complete Studio Kit combines the AI-1 USB audio interface with the NT1 cardioid condenser microphone, the SMR advanced shockmount with pop filter, a premium XLR cable, a USB cable, and a copy of Ableton Live Lite to create an all-in-one solution for recording vocals and instruments in a project studio or while on the go.
Rode AI-1 Studio-Quality USB Audio Interface
The Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4" input with phantom power, two balanced 1/4" monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.
Desktop USB audio interface with low-noise Class-A discrete preamplifier
Sampling rate of up to 96kHz/24-bit
One combo XLR-1/4" combo input
Two balanced 1/4" monitor outputs
One discrete, studio-quality headphone output
Phantom power for condenser microphones
Zero-latency monitor mode
USB bus powered
USB Type-C connector for future proof operation
Rugged body with Satin Black Finish
Class compliant”no drivers required
Includes Ableton Live Lite
Includes USB cable
Rode NT1 Cardioid Condenser Microphone (Microphone Only)
The NT1 Cardioid Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features RODE's HF6 1" capsule. The HF6 is designed to provide a detailed midrange response with smooth highs and warm bass. The capsule itself is seated in a Rycote Lyre internal shockmount to help reduce vibration and handling noises.
The microphone's electronics were designed from the ground-up for quiet performance, and allow the NT1 to have a low, 4.5 dB of self-noise. The body of the mic is machined from nickel-plated aluminum that is then coated in a ceramic layer that is electrostatically applied for a scratch-resistant finish. The NT1 includes the RM2 mic clip and has a 1-year limited warranty that extends to 10-years after registration with RODE.
Rode SMR Advanced Shock Mount for Large Diaphragm Condenser Mics
The Rode SMR is a professional-grade shock mount for large diaphragm condenser mics. Featuring a double-Lyre suspension system, the SMR enhances Rycote's Lyre system by using a smaller inner Lyre to act as a tensioning element.
The SMR's removable all-metal pop filter provides an integrated solution for plosive protection, that is washable and designed to last as long as the shock mount and microphone. The SMR's clamping system design utilizes a large surface area, allowing for ample friction and weight handling, without the need for over-tightening of the locking thread. With the load distributed over a greater surface area, the clamping system is designed to better withstand the wear and tear of repeated use.
The SMR's frame is made from an engineering grade reinforced polymer. Vibration force is evenly distributed around the outer frame via the wide mounting rails, increasing the effectiveness of the Lyre system.
A base nut is also included, suitable for all compatible Rode microphones.
###
Rode AI-1 Studio-Quality USB Audio Interface Specs
Interface
Max Sample Rate/Resolution
96 kHz / 24-Bit
Connectivity
Host Connection
USB Type-C
Analog I/O
1 x Combo XLR / 1/4" Input2 x 1/4" (6.3 mm) Balanced Output1 x 1/4" (6.3 mm) TRS Headphone Output
Phantom Power
+48 V
Digital I/O
None
MIDI I/O
None
Performance
Frequency Response
20 Hz to 20 kHz ±1 dB
Gain Range
Inputs:0 to 45 dB
Max Output Level
Monitor Outputs:-6 dBu
Headphone Output Power
24 mW into 32 Ohms245 mW into 300 Ohms
Dynamic Range
104 dBu
Impedance
Hi-Z Inputs:0.9 MOhm Mic Inputs:1.3 kOhms
EIN
-128 dBA
Digital Audio
Sample Rates
44.1, 48, 88.2, and 96 kHz
Bit Depth
24-Bit
Latency
Zero-Latency Direct Monitoring
Compatibility
OS Compatibility
macOS 10.10 or LaterWindows 7 or Later
Physical
Dimensions
3.9 x 4.9 x 1.5" / 100 x 124 x 38 mm
Weight
19.8 oz / 561.3 g
Packaging Info
Package Weight
1.155 lb
Box Dimensions (LxWxH)
7 x 5.1 x 2.55"
Rode NT1 Cardioid Condenser Microphone (Microphone Only) Specs
Microphone
Operating Principle
Pressure Gradient
Capsule
Condenser
Diaphragm
1" / 25.40 mm
Polar Pattern
Cardioid
Performance
Frequency Range
20 Hz to 20 kHz
Maximum SPL
132 dB SPL
Impedance
100 Ohms
Sensitivity
-29 dB
Equivalent Noise Level
4 dB A-Weighted
THD
1%
Connectivity
Output Connectors
1 x 3-Pin XLR
Power
Operating Voltage
24 V48 V
Physical
Length
7.36" / 187 mm
Diameter
1.97" / 50 mm
Weight
0.97 lb / 440 g
Packaging Info
Package Weight
1.75 lb
Box Dimensions (LxWxH)
9.1 x 5.5 x 3.4"
Rode SMR Advanced Shock Mount For Large Diaphragm Condenser Mics Specs
Physical
Dimensions
5.0 x 9.0 x 8.3" (130 x 220 x 210 mm)
Weight
9.2 oz (260 g)
Packaging Info
Package Weight
1.37 lb
Box Dimensions (LxWxH)
10.2 x 7.9 x 4.75"
The NT-USB is a highly versatile side-address microphone that is ideal for recording singing and musical performances in addition to spoken applications such as podcasting and voice-over.
It is fully compatible with all mainstream recording applications on both Windows and Mac OS based computers, as well as the Apple iPad using R˜DE Rec, GarageBand, or any other recording app that accepts an external microphone. Use on the Apple iPad requires a suitable USB connection adaptor, such as the Apple Camera Connection Kit.
The body of the NT-USB features a zero-latency stereo headphone monitoring (3.5mm) jack, which allows you to monitor the microphone input in realtime, along with dials to adjust the monitoring level and mix between the computer/iPad audio and the microphone input.
A premium pop-filter is included, which fits onto the base of the mic, positioning the filter the ideal distance from the capsule to minimise plosives (hard 'B', 'T' or 'P' sounds that produce a harsh sound) during singing or speech. Also provided is a high-quality stand mount with industry standard 3/8 thread, desktop tripod stand that allows the NT-USB to sit at a comfortable height on a tabletop, and a pouch for storage of the microphone when not in use.
FEATURES
High quality studio microphone with the convenience of USB connectivity
Pop shield, Tripod desk stand, ring mount, storage pouch and 6m (20') USB cable included
3.5mm stereo headphone jack for zero-latency monitoring
Direct mix control between mic input and source output
Compatible with Apple® iPad
compatible with the SMR shockmount & WS2 foam windshield
Two year extended warranty when you register your microphone
###
Acoustic Principle
Pressure Gradient
Active Electronics
JFET impedance converter with bipolar output buffer, A/D converter 16bit 48kHz
Capsule
0.50"
Polar Pattern
Resolution
16-bit
Address Type
Side
Frequency Range
20Hz - 20kHz
Maximum SPL
110dBSPL
Power Options
USB
Weight
520g
Dimensions
184mmH x 62mmW x 50mmD
Output
USB
De Rode Reporter Microfoon is ontworpen voor gebruik op locatie en presentatietoepassingen. De Reporter heeft een omnidirectionele dynamische capsule, die u maximaal gebruikersgemak oplevert, zonder dat u zich zorgen hoeft te maken over eventuele technische vraagstukken. Daarnaast is de frequentierespons speciaal op maat gemaakt voor spraak reproductie en om de verstaanbaarheid te maximaliseren. Dit zorgt voor scherpe en heldere resultaten in bijna alle omstandigheden.
De Rode Reporter is voorzien van een duurzame gegoten aluminium legering lichaam, bedekt met een discrete matzwarte anti-glare afwerking. Een innovatief multi-layer gaasmand beschermt de microfoon van omgevingsgeluid.
Specificaties:
- Frequentie: 70Hz ~ 15,000Hz
- Output: e 150dB ± 30% @ 1kHz
- Gevoeligheid: -56dB (1.0mV @ 94dB SPL) ±3dB re 1V/Pa @ 1kHz
- Connectie: XLR
- Gewicht: 256 gr
- Afmetingen: 272.5mm x 41.5mm x 41.5mm
The Rode NTG4 Shotgun Microphone with Digital Switches is designed for ENG, filmmaking, field recording, sound design, and broadcast applications. The microphone builds upon the success of the company's NTG1 and NTG2 microphones with an updated capsule to deliver broadcast quality sound and digital switching options for versatile field operation.
Designed to be mounted on a boom, a handheld pistol grip, or atop a compact camera for run and gun style filmmaking, the microphone features a super-cardioid directional pickup pattern, a frequency range of 20 to 20,000 Hz, a sensitivity of -32 dB re 1 V/Pa, a dynamic range of 119 dB, a signal to noise-ratio of 78 dB SPL, and a maximum SPL of 135 dB from 48V, 24V, or12V phantom power (4.5 mA current draw).
Along the body of the microphone is a power button with LED indicator as well as three digital switching buttons with LED indicators.
The first button provides a -10 dB pad on the input of the microphone to allow the recording of loud sounds without clipping.
The middle button turns on a 75 Hz high pass filter which is useful for reducing low frequency and infrasonic rumble from HVAC systems indoors or street traffic outdoors from over-powering the recording.
The third button is a high frequency boost. The value of the high frequency boost is in restoring some of the high frequency content that is often lost when a blimp or furry windshield is placed over the microphone. An added benefit is that the high frequency boost switch can help improve the intelligibility of recorded speech, especially useful for filmmaking and broadcast applications.
The microphone comes with an RM5 microphone clip, a foam windshield and a carrying pouch.
-10 dB Pad
Attenuates the microphone input to allow for the recording of loud sounds without clipping
75 Hz High Pass Filter
Reduces low frequency and infrasonic rumble from HVAC systems indoors or street traffic outdoors from over-powering the recording
High Frequency Boost
Restores some of the high frequency content that is often lost when a blimp or furry windshield is placed over the microphone and improves the intelligibility of recorded speech
Setting Memory
Recalls the digital switch settings when the microphone is powered on and off
###
Acoustic Principle
Line gradient
Directional Pattern
Super-cardioid
Frequency Range
20 to 20,000 Hz (selectable HPF at 75 Hz)
Sensitivity
-32 dB re 1V/Pa (25 mV at 94 dB SPL) ± 2 dB at 1,000 Hz.
Output Impedance
200 ohm
Equivalent Noise
16 dBA SPL (per IEC651)
Maximum Output
7 dBu (at 1 kHz, 1% THD into 1 kOhm)
Dynamic Range
119 dB (per IEC651)
Maximum SPL
135 dB
Signal to Noise Ratio
78 dB SPL (per IEC651)
Battery
Not applicable
Output Connection
3-pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground)
Dimensions
0.87 x 8.86" (22.00 x 225.00 mm)
Weight
4.44 oz (126.00 g)
De VideoMic GO is een hoogwaardige microfoon voor op de camera voor het vastleggen van heldere, directionele audio voor vloggen en filmmaken. Extreem licht en gebruiksvriendelijk, het is de perfecte manier om het geluid van uw camera aanzienlijk te verbeteren en uw inhoud naar een hoger niveau te tillen.
Belangrijkste kenmerken:
Hoogwaardige condensatormicrofoon op de camera
Supercardioïde polair patroon voor het vastleggen van gerichte, directionele audio
Geïntegreerde Rycote® Lyre®-schokmontage voor superieure isolatie van handlinggeluid
Windscherm van hoge kwaliteit voor buitenopnamen
Extreem gebruiksvriendelijk, geen batterij nodig
###
Microphone
Form Factor
Stand/Boom Mount
Sound Field
Mono
Operating Principle
Line Gradient
Capsule
Electret Condenser
Diaphragm
0.5" / 12.70 mm
Polar Pattern
Supercardioid
Orientation
End Address
Circuitry
Solid-State (JFET)
Pad
None
High-Pass Filter
None
Tone Adjustment
None
Gain Adjustment
None
Indicators
None
On-Board Controls
None
Windscreen
Foam (Included)
Performance
Frequency Range
100 Hz to 16 kHz
Maximum SPL
120 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection
4 dB at 60°16 dB at 120°12 dB at 180°
Sensitivity
-35 dBV/Pa at 1 kHz
Dynamic Range
96 dB
Signal-to-Noise Ratio
60 dB A-Weighted
Equivalent Noise Level
34 dB A-Weighted
Connectivity
Output Connectors (Analog)
1 x 1/8" / 3.5 mm TRS
Cable Length
7.87 to 13.78" / 20 to 35 cm
Number of Conductors
2
Wireless Connectivity
None
Power
Operating Voltage
2.5 V
Operating Current Consumption
330 µA (Plug-In Power)
Physical
Color
Black
Mounting
Camera/Shoe-Mount, Shockmount (with Included Hardware)
Mounting Thread Size
3/8"-16 Female
Included Case
None
Construction Material
ABS
Dimensions
¸: 3.11 x L: 6.57" / ¸: 79 x L: 167 mm
Weight
2.58 oz / 73 g
###
Rode VideoMic GO
Coiled 3.5mm TRS Cable
De VideoMic is een hoogwaardige shotgun-microfoon voor op de camera. Het beschikt over een condensatorcapsule van studiokwaliteit en een zeer directioneel supercardioïde polair patroon, plus een selecteerbaar hoogdoorlaatfilter en tweetraps niveauregeling voor het opnemen van luide geluidsbronnen, waardoor het een uiterst veelzijdige microfoon is die uitblinkt in een breed scala aan filmsituaties. Het beschikt ook over een geïntegreerd Rycote® Lyre®-schokmontagesysteem dat uitstekende isolatie biedt tegen externe trillingen en een windscherm met hoge dichtheid voor opnamen in winderige omgevingen.
Belangrijkste kenmerken:
Hoogwaardige directionele microfoon op de camera
Supercardioïde polair patroon
Tweetraps versterkingsregeling, hoogdoorlaatfilter (80 Hz)
Geïntegreerde Rycote Lyreu schokmontage
10 jaar garantie
###
Microphone
Form Factor
Stand/Boom Mount
Sound Field
Mono
Operating Principle
Line Gradient
Capsule
Electret Condenser
Diaphragm
0.5" / 12.70 mm
Polar Pattern
Supercardioid
Orientation
End Address
Circuitry
Solid-State (JFET)
Pad
-10 dB-20 dB
High-Pass Filter
80 Hz
Tone Adjustment
None
Gain Adjustment
None
Indicators
1 x Single LED (Power)
On-Board Controls
High-Pass Filter, Pad, On/Off
Windscreen
Foam (Included)
Performance
Frequency Range
40 Hz to 20 kHz
Maximum SPL
134 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection
4 dB at 60°16 dB at 120°12 dB at 180°
Impedance
200 Ohms
Sensitivity
-38 dBV/Pa at 1 kHz
Output Level
6.9 dBu (Max)
Dynamic Range
114 dB
Signal-to-Noise Ratio
74 dB A-Weighted
Equivalent Noise Level
20 dB A-Weighted
Connectivity
Output Connectors (Analog)
1 x 1/8" / 3.5 mm TRS
Number of Conductors
2
Wireless Connectivity
None
Power
Operating Voltage
9 V (Battery Power)
Operating Current Consumption
5 mA
Battery Type
1 x 9 V (Not Included)
Approximate Battery Life
100 Hours
Physical
Color
Black
Mounting
Camera/Shoe-Mount, Shockmount (via Integrated Hardware)
Mounting Thread Size
3/8"-16 Female
Included Case
None
Construction Material
ABS
Dimensions
¸: 3.86 x L: 9.76" / ¸: 98 x L: 248 mm
Weight
6.03 oz / 171 g
###
Rode VideoMic
Vaak wordt het geluid bij een video opname onderschat of als een hinderlijke sluitpost gezien.
De Rode VideoMic Pro Stereo zorgt ervoor dat de geluids opnamen die tijdens het filmen met een DSLR camera of videocamera worden gemaakt een broadcast allure krijgt.De compacte condensatormicrofoon plaatst u zeer eenvoudig op de accessoireschoen van uw camera, al of niet met behulp van onze montage converters (voor kleine cameraatjes).
VideoMic Pro Stereo: eenvoudige montage
Deze compacte videomicrofoon is geschikt voor haast iedere DSLR- en Videocamera. Via de hot shoe-montage en de mini-jackaansluiting zet u de Rode VideoMic Pro Stereo in een handomdraai op de camera. Het stijlvolle ontwerp is licht en compact zodat u geen hinder ondervindt van deze microfoon tijdens het filmen.
De voeding van deze energiezuinige microfoon wordt verzorgt door een 9V-batterij.
- Compacte stereo-videomicrofoon
- Eenvoudig te gebruiken met haast elke DSLR-camera of videocamera
- Accesoireschoen montage
- 2-stappen high-pass-filter
- Stereo microfoon X/Y-opstelling voor duidelijkheid in de links-rechts stereogeluidsopnamen
- Voeding: 9V-batterij
- 3.5 mm minijack plug
- Impedantie: 200 Ohm
- Frequentiebereik: 40 Hz - 20 kHz
- Maximale SPL: 134 dB
- Degelijke en lichte constructie
- Gewicht: 240 gr
###
Transducer
Pressure gradient
Polar Pattern
XY Cardioid
Frequency Range
40 Hz to 20 kHz (selectable HPF @ 75 Hz)
Sensitivity
-38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz
Output Impedance
200 Ohms
Maximum Output
+4.2 dBu (@ 1% THD into 1 kOhms)
Dynamic Range
100 dB
Maximum SPL
134 dB, max (1 kHz, 1% THD into 1 kOhms load)
Signal / Noise
76 dBA (A-weighted per IED651)
Power Supply
9 V alkaline battery
Connection
1/8" (3.5 mm) stereo mini-jack
Signal to Noise Ratio
76 dBA SPL (A-weighted per IEC651)
Dimensions
4.5 x 3.1 x 5.3" (115 x 80 x 134 mm)
Weight
0.26 lb (116 g) (without battery)
###
Rode Stereo VideoMic Pro Rycote
Metal Camera Shoe Mount with 3/8" Thread
Foam Windscreen
The BoomPole Bag is a high-quality neoprene carry bag designed to accommodate a boompole with shock mount and microphone attached.
Boompole Bag Specifications
Weight 575.00gm
Dimensions 960.00mm H x 200.00mm W x 20.00mm D
The Rode M2 Handheld Condenser Microphone delivers professional, detailed vocal reproduction in live sound reinforcement, small public address and recording applications. The M2 features a condenser capsule with a supercardioid polar pattern for superior rejection against feedback and off-axis noise. An on/off switch and rugged enclosure are also featured.
- Live condenser vocal microphone
- Feedback rejecting supercardioid pick up pattern
- Locking on/off switch
- Heavy duty metal body
- High level of RF rejection
- Low handling noise
- Designed and manufactured in Australia
- Ten year warranty
###
Transducer Condenser
Polar Pattern Supercardioid
Frequency Response 35Hz to 20kHz
Signal-to-Noise Ratio 71dB SPL (A - weighted per IEC651)
Maximum Input Sound Level 141dB (@1kHz, 1% THD into 1k ohms load)
Power Requirements P24/48V Phantom Power
Output Impedance 50 ohms
Output Connectors 3-pin XLR
Pad No
Low Frequency Roll-Off No
Dimensions (WxHxD) 1.85 x 7.36 x 1.85" (47 x 187 x 47mm)
Weight 308g
The Dead Kitten windshield is designed for minimising any wind noise when using a microphone in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
Deadkitten Specifications
Weight 25.00gm
Dimensions 80.00mmH x 80.00mmW x 80.00mmD
Warranty 1 year
The Rode NTG1 Condenser Shotgun Microphone is designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG1's broadcast sound quality.
The supercardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal. The result is greater intelligibility and signal-to-noise ratio while using the NTG1 in noisy environments.
The NTG1 is powered with an external +48 Volt phantom power source; the output is a standard 3-pin XLR male connector.
The microphone features a rugged, all metal, light weight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use. The Rode NTG1 is packaged with a microphone stand mount and windscreen.
Super-Cardioid Polar Pattern
The super-cardioid polar pattern and line gradient acoustic principle allow for a narrow pick up pattern at the front of the capsule while minimizing noise at the off-axis sections.
Lightweight Durable Construction
The NTG1 features a lightweight metal housing that is ideal for camera mounting.
Low Handling Noise
Low noise output electronics provides high signal-to-noise ratio. The NTG1 is designed to also reduce noise caused by handling, rigid mounting hardware, loose cabling etc.
###
Transducer
Condenser
Polar Pattern
Supercardioid
Frequency Response
20Hz to 20kHz
Dynamic Range (Typical)
121dB (per IEC651, IEC268-15)
Signal-to-Noise Ratio
76dB (1kHz rel, 1Pa; per IEC651, IEC268-15)
Maximum Input Sound Level
139dB SPL (@ 1% THD into 1k ohm)
Power Requirements
+48V phantom, 44V to 52V
Output Impedance
50 ohms
Output Connectors
3-pin XLR balanced
Pad
No
Low Frequency Roll-Off
Yes
Dimensions (LxDiameter)
8.54 x .87" (217 x 022mm)
Weight
3.7 oz (105g)
The R˜DE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, as well as any third party shotgun microphone up to 325mm (12 ¾) in length.
Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
The Blimp's handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone. With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted).
The Blimp attaches to any standard boompole via 3/8" thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight. The Dead Wombat windshield, caring brush and tail/patch cable are included.
The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design.
*Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product.
- Greatly reduces handling and wind noise
- Accommodates most shotgun microphones 325mm in length and 19-22mm diameter
- Rycote Lyre suspension system onboard with internal spacing guide
- Lightweight skeleton handle with 3/8 thread mount
- Mogami cable with Neutrik and Switchcraft XLR connectors
- Dead Wombat windshield included
- 10 year warranty (no registration required)
Weight
550gm
Dimensions
285.00mmH x 490.00mmW x 125.00mmD
Warranty
10 year warranty
The R˜DE WS6 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones.
Designed to reduce wind noise when recording in adverse environmental conditions, the WS6 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.
Suitable for the R˜DE NTG1, NTG2, NTG4 and NTG4+ as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.
Weight
50.00gm
Dimensions
100.00mmH x 100.00mmW x 185.00mmD
The R˜DE Boompole is a precision balanced professional boom pole for location recording, machined from high grade, lightweight aluminium.
The Boompole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source.
Extends from 0.84m (33") to 3m (10')
Weight 940.00g
Dimensions 3300.00mmH x 40.00mmW x 40.00mmD
The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
Weight
22.00gm
Dimensions
31.00mmH x 105.00mmW x 208.00mmD