Secure, heavy duty dolly for absolute stability. Designed to keep even the heaviest gear locked in place, this practical Video Dolly is an essential on set.It's built to last in durable aluminium. Plus each wheel has an individual brake. Perfect for when you need to keep everything safe and securely in place. Despite its impressive heavy lifting capabilities, this dolly is neat and compact when folded away. Ideal for popping in your kit bag, transporting to outdoor shoots, or tidying away at the end of the day.Compatible with 545B, 545GB, 546B and 546GB Manfrotto tripods.
Weight 5940 g
Material Aluminium
Ball Flat Flat
Colour Black
Safety Payload Weight 60 kg
The Manfrotto 127 Basic Video Dolly features a 10 kg load capacity and supports all tripods with a 50 cm radius (as long as the overall weight of the tripod, camera, and accessories doesn't exceed 10 kg). It features 76 mm wheels with a sure-lock feature that raises casters free off the ground and lets the dolly rest on separate feet.
Note: Spiked feet not supported.
Construction
Aluminum
Load Capacity
10 kg
Doorway Width
110 cm
Folded Length
57 cm
Wheel Diameter
76 mm
Wheel Lock
Yes
Cable Guards
No
Dimensions
Folded: approximately 57.15 x 35.56 x 17.78 cm
Weight
2.4 kg
Heavy duty, super sturdy dollies are designed for use with large still and video tripods. They feature large 127mm individually braked wheels with cable guards. Folds for transporting.
Weight 6480 g
Material Aluminium
Safety Payload Weight 60 kg
Support your camera rig weighing up to 10kg and create smooth pan and tilt movements with this NX-300C Carbon Fiber Tripod System with NH30 Head, Ground Spreader, Long Plate & Case from Libec. The NX-300C system includes the NH30 dual 75mm bowl/flat base video head, the RT20C carbon fiber tripod, the SP-1B ground spreader, the Long Plate S balance plate, and an RC-20 carry case.The base of the head fits the tripod's 75mm bowl, and it is also compatible with tripods with a flat mount. It features continuous pan/tilt drag and counterbalance, a snap-on/off quick release plate, an illuminated bubble level, and a pan bar. The Long Plate S is an extended camera plate to support larger, heavier rigs. The two-stage lightweight carbon fiber tripod weighs only 1,6kg and can extend to a height of 154cm. The ground spreader installs at the base of the tripod to add stability to the rig. The carry case stores and transports the entire system.
Libec NH30 75mm Ball/Flat Base Video Head with Pan Handle (10kg Payload)
Designed to support camera rigs weighing up to 10kg, the NH30 75mm Ball/Flat Base Video Head with Pan Handle from Libec features a unified ball/flat mount design. The base of the tripod can fit either in a standard 75mm bowl or on a flat mount with a 3/8"-16 screw. Having both options available means you can transfer the head from a tripod with a bowl mount to a flat mount slider.To achieve proper balance, the NH30 head includes a snap-on/off camera plate that can slide up to 1.2" of fore/aft adjustment, and it features 1/4"-20 and 3/8"-16 camera mounting screw options. The screw and locating pin are moveable to orient the plate on the camera to achieve the best possible balance. Once the camera is balanced, the continuous counterbalance and pan/tilt drag controls provide smooth movement. On the side, there are 1/4"-20 and 3/8"-16 threads to mount a variety of accessories such as a light, monitor, or extension arm.
Included with the NH30 is a pan handle that can be placed on the right or left side of the head by screwing it onto one of the mounts. The LED-illuminated bubble level helps to level the camera on uneven surfaces, even in low light.
Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl
Add a durable, lightweight tripod to your camera rig with this RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl from Libec. The RT20C offers a 75mm bowl fitting for mounting a wide variety of fluid heads. Without the included feet and spreader, the lightweight carbon fiber legs weigh only 1,6kg. Secured by twist levers, the 2-stage legs have a height range of 37cm to 154cm.
Libec RC-20 Carrying Case for NX-100C & NX-300C Tripods
The Libec RC-20 Carrying Case is designed to carry Libec NX-100C and NX-300C tripods systems. Made from a combination of materials that are resistant to water, wear, and tearing, the case has a soft non-padded lining that makes it easy to insert and remove your tripod without scratching its finish.
Construction
Made of nylon, polyester, polypropene, polyethylene, acetal plastic & thermoplastic elastomer
Combining multiple materials adds wear, water, and rip resistance
Soft unpadded interior makes it easy to insert and remove tripod without marking or marring its finish
Zipper closure
Pockets
Large main compartment holds a NX-100C or NX-300C tripod system
Zippered exterior slip pocket
Open exterior slip pocket
Carrying options
Soft connecting carry handles
Carry handles are located off-center for proper load balance with the tripod system inside
Attached, adjustable shoulder strap
Weighs just over a pound empty
Libec Long Sliding Plate S for TH-X, TH-Z, NH10 & NH30 Heads
This Long Sliding Plate S from Libec helps to properly balance a heavier camera or camera rig with a longer lens on select tripod heads. This 23,9cm long plate is constructed from an aluminum alloy and offers a 3.7" sliding range. It is compatible with Libec TH-X, TH-Z, NH10, and NH30 heads, as well as select Manfrotto and Sachtler heads.
Sliding Plate
Measures 23,9cm long with a sliding range of 9,4cm
Compatibility
Libec TH-X, TH-Z, NH10, and NH30 heads
Select Manfrotto and Sachtler heads
Aluminum Alloy
Durable aluminum alloy construction
###
Libec NH30 Video Head
Camera Plate
Camera Plate Features
Sideload, Sliding Balance Plate
Camera Mounting Screw
1 x 1/4"-20 Male with Locating Pin1 x 3/8"-16 Male with Locating Pin
Balance Plate Sliding Range
1.2" / 30.5 mm
Safety Lock
Yes
Tripod Platform
Base Mount
3/8"-16 Female75 mm Half BallFlat Base
Pan & Tilt
Drag Control
Tilt: Continuous 3-StepPan: Continuous 3-Step
Drag Type
Friction
Vertical Tilt
+90° to -70°
Independent Pan Lock
Yes
Independent Tilt Lock
Yes
Physical
Load Capacity
22 lb / 10 kg
Counter Balance
Continuous 5-Step (0 to 22 lb / 0 to 10 kg)
Pan Handle Fittings
2
Bubble Level
1 x Illuminated
Accessory Mounting
1 x 1/4"-20 Female Thread1 x 3/8"-16 Female Thread
Base Diameter
2.95" / 75 mm
Operating Temperature
-40 to 140°F / -40 to 60°C
Weight
4 lb / 1.8 kg
Libec RT20C 2-Stage Carbon Fiber Tripod
Legs
Leg Lock Type
Rotating Locking Lever
Leg Sections
3
Spreader
Mid-Level (Included)
General
Maximum Working Height
60.6" / 154 cm
Minimum Working Height
14.6" / 37 cm
Materials
Aluminum
Weight
3.5 lb / 1.6 kg
###
Libec NX-300C Carbon Fiber Tripod System
Ground Spreader
Pan Bar
Tripod Bag
The Libec ZFC-L LANC Zoom and Focus Control enables remote REC start/stop, zoom, and focus control for LANC-equipped Canon and Sony camcorders (certain models may have limited or no compatibility). It connects to the camcorder via a 2.3' long cable terminated with a 2.5mm sub mini plug.
The zoom speed can be adjusted by tilting the rocker. Its inverted switch allows you to control the zoom direction. The control unit features a clamp that easily mounts onto pipes up to 1.8" in diameter.
###
Functions
Record Start/Stop ButtonZoom Rocker (Continuous Variable Zooming)Inverted Switch (Reversing the Zoom Direction)Focus ButtonNote: Certain models are not compatible with the variable zooming function.
Connectors
2.5 mm Sub Mini Plug
Operating Temperature
14 to 104°F / -10 to 40°C
Clamping Width
0.4 to 1.8" / 1.0 to 4.5 cm
Cable Length
2.3' / 70 cm
Dimensions
3.1 x 2.2" / 8.0 x 5.5 cm
Weight
0.3 lb / 0.12 kg
###
Libec ZFC-L LANC Zoom and Focus Control for compatible Sony/Canon Cameras
The Libec ZC-LP LANC Zoom Control enables remote REC start/stop and zoom control for LANC-equipped Sony, Canon, and Panasonic camcorders (certain models may have limited or no compatibility). It features a 2.3' cable terminated with a 2.5mm sub mini plug for camera connection.
The control unit features a clamp that easily mounts onto pipes up to 1.8" in diameter. It comes with a converter switch that allows you to set the camera type to LANC or Panasonic. The zoom speed can be adjusted by tilting the rocker. The unit's inverted switch allows you to control and reverse the zoom direction.
###
Functions
Converter Switch for Setting the Camera TypeRecord Start/Stop ButtonZoom Rocker (Continuous Variable Zooming)Inverted Switch (Reversing the Zoom Direction)Note: Certain models are not compatible with the variable zooming function.
Connector
2.5 mm Sub Mini Plug
Operating Temperature
14 to 104°F / -10 to 40°C
Clamping Width
0.4 to 1.8" / 1.0 to 4.5 cm
Cable Length
2.3' / 70 cm
Dimensions
3.1 x 2.2" / 8.0 x 5.5 cm
Weight
0.3 lb / 0.12 kg
###
Libec ZC-LP LANC Zoom Control for compatible Sony/Canon/Panasonic Cameras
Tweedekans artikel met gebruikssporen: De buis van de tophandle die wordt geklemd heeft krassen. Dit is onvermijdelijk bij het monteren van de tophandle.
Het artikel is verder in nieuwstaat.
MoVI Classic handle allows users to operate MoVI Pro with a handle similar to the ones used on the original MÅVI. This handle enables super low shots, or shots which require a smaller operating footprint (car interior etc.). The handle is 450mm wide for a comfortable shooting position and features an integrated quick release Toad in the Hole.
Features:
450mm width
Integrated TITH
13mm quick release monitor mount
25mm carbon tube
Quick release TITH mount
Quick release top handle
Quick release clamps on cross bar to allow fast repositioning of handles
Suitable for:
MÅVI Pro
De MÅvi Pro naar SL-batterijadapters schuift u in de bestaande MÅvi Pro-batterij mount om ze the adapteren voor de SL4-batterijen.*Ze zijn voorzien van een snelkoppeling om ze on the fly the kunnen wisselen.
Er zijn twee 4-pins Molex-connectoren op de adapter die directe batterijspanning** leveren voor het voeden van een hele reeks accessoires***.
*Fysieke ondersteuning voor SL8-batterijen komt eraan!
**Zorg ervoor dat de apparaten die u via deze poorten van stroom voorziet, 6s-spanning (18v-25,2v) aankunnen of gebruik een spanningsregelaar om naar de gewenste spanning converteren.
***Apparaten die aan deze poorten zijn aangesloten zullen uitschakelen tijdens een hot-swap.
###
Adapteert MÅvi Pro naar SuperLight (SL) battery interface
Tool-less Quick Release
Two 4pin Molex connectors voor directe battery voltage (18-25.2v)
Geschikt voor SL4 (SL8 met extender)
###
2x Freefly MÅvi Pro to SL Battery Adapters
De Freefly SL accu lader maakt gebruik van USB Power Delivery voor veelzijdigheid en gemak.Moderne laptops, mobiele telefoons en een hele reeks andere elektronica worden gevoed via USB. Wilt u uw SL accu gebruiken om uw MacBook van stroom te voorzien en uw telefoon op te laden? Plug de MacBook in de ingebouwde USB-C poort van de accu en de telefoon in de USB-C poort in de SL-oplader. Het kan ook USB-stroom leveren!
Deze oplader is een lichtgewicht en onopvallende oplossing voor het opladen van zowel SL4- als SL8-batterijen vanaf in de handel verkrijgbare adapters, zoals USB C-computerladers.*
*Zorg ervoor dat u een 100 watt+ USB C-wandadapter (niet meegeleverd) gebruikt voor snelle oplaadtijden.
###
Input: USB type C
Input Range: USB Power Delivery (PD) 9V, 12V, 15V, or 20V. For full speed charging, USB PD 20V, 5A (100W)
Compatible with SL4-Ground & SL8-Air Batteries
Estimated charging times, from fully depleted:
SL4-Ground (with 100W input) - Roughly 70 min
SL8-Air (with 100W input) - Roughly 2.5 hrs
###Qty 1 - SL Battery Charger USB C
Qty 1 - USB C to C Cable (2m/6.5ft)
Not included, but required for operation:
USB C Wall Adapter (For full speed charging, USB PD 20V, 5A (100W))
De SL4-Ground accu is ontworpen als een duurzame, robuuste stroomoplossing voor MÅvi Pro en MÅvi Carbon.SL4-Ground Accu's zijn 4.1Ah 6s (18v-25.2v) voor een langere looptijd dan het originele Movi batterijsysteem met MÅvi Pro of Carbon.
Functies
De batterijen hebben een USB type C-poort die tot 60 watt levert voor het voeden van apparaten zoals een telefoon of laptop.
Het zijn slimme batterijen met een scherm voor het bekijken van een reeks specificaties, van spanning en vermogen tot levenslange oplaadcycli en nog veel meer.
SL-batterijen maken gebruik van lithium-ioncellen voor betrouwbaardere prestaties en veiliger in het gebruik dan LiPo-batterijcellen.
###
Nominal Voltage: 21.6 V
Min Voltage: 18 V
Max Voltage: 25.2 V
Capacity: 4.1 Ah
Capacity: 86.4 Wh
Ambient Operating Temperature : -20 C to 50 C
Battery Cell Temperature: 10 C to 50 C
Charging Temperature: 0 C to 50 C
Weather: Moderate rain (~3 mm/minute)
Drop Rating: 1 meter
USB Power Delivery: 60W (up to 3A at 5V, 9V, 12V, 15V or 20V)
Cell Chemistry: Lithium-Ion
Cell Type: Lishen LR2170SF
Max Current: 20 A
Continuous Current: 13.5 A
Weight: 600g
###
1x Freefly SL4-Ground Battery
Dit is een vervangende (of reserve) interne batterij voor de Freefly Wave Camera.
Het vervangen van de batterij kan het beste op een stofvrije plaats worden gedaan. Het vervangen van de batterij vereist demontage van de 4 schroeven en de voorplaat om toegang te krijgen tot de batterij.*
*Wave frontplaat en bevestigingsmiddelen niet inbegrepen bij vervangende batterij.
###
General
Compatibility
FREEFLY Wave
Battery
Battery Chemistry
Lithium-Ion
Battery Capacity
2200 mAh
Output Voltage
11.1 VDC
Recharge Time
1.5 Hours
Maximum Battery Life
90 Minutes
###
Freefly Wave Replacement Battery
Gebruik de verstelbare Freefly Wave monitorbevestiging om een monitor direct op de Wave-behuizing te monteren. Eenmaal geïnstalleerd op de Wave, kunt u de monitor bevestigen en de kijkhoek eenvoudig aanpassen.De monitor wordt aan de houder bevestigd met behulp van een 13 mm brede ronde connector met snelsluiting, waardoor hij compatibel is met alle 13 mm-montageaccessoires in het Freefly-ecosysteem.
Er worden twee soorten bevestigingsmateriaal meegeleverd. De aanbevolen methode is met 2x M3-schroeven, die ervoor zorgen dat de mount niet kan roteren wanneer ze aan de boven-, onderkant of zijkanten van de camera worden gemonteerd (indien nodig). Maar er is ook een 1/4" 20-bevestiging meegeleverd voor snelle of universele montage op andere items met 1/4" 20-schroefgaten.
In the Box
Qty 1 - Adjustable Monitor Mount for Wave
Qty 1 - 13mm Plug
Qty 1 - 13mm SmallHD compatible Plug
Qty 2 - Bolt M3 x 6 SHCS
Qty 1 - Bolt ¼-20 x ½ Countersunk Bolt
This is the most advanced camera movement system ever created. It offers industry leading performance, flexibility, and ease of use. And it's now shipping with SL4 batteries!
MÅvi Pro is a lightweight, flexible and portable system that allows users to create world class production quality video content quickly and easily.
Features:
Innovative structural design for ease of use, convenience, strength, versatility
Compatible with:
Original MÅvi Pro Batteries
SL4-Ground Batteries (included with this bundle)
TB50/55 batteries (with applicable adapters, not included)
Integrated focus / iris / zoom controller
Integrated screen for tuning / customization / monitoring
Increased motor torque
12-14v 6A D-Tap output for camera power
Dual 12V D-Tap output for accessory power (1A and 2A)
Ultra fast
Full stiffness and filter Autotune in ~5 seconds
MÅvi Pro mobile applications (iOS, Android)
Majestic Mode
Timelapse Mode
Dual GPS (top and bottom) for solid signal in Sky or GroundView
Full Red RCP2 integration with control of focus/iris (on EF lenses), ISO, start/stop, and more (with applicable RCP cable, not included)
Internal long range 2.4GHz frequency hopping radio for connection to MIMIC (MIMIC not included)
Multiple handle options:
MÅvi Ring Pro II (included)
Low Profile Handle (optional)
Classic Handle (optional)
###
Weight (w/o batteries): 2.65kg/5.84lbs
Camera cage dimensions: 196 x 200 x 175mm (L*W*H)
Maximum payload: 6.80kg/15 - 30lbs depending on application
Runtime with a pair of fully charged SL4 batteries (our testing, your mileage may vary!)
2.25 hrs - RED Helium Epic, 6k 13:1, 2 focus motors, wireless video, with continuous handheld use
2.25 hrs - RED Helium Epic, 8k 6:1, 2 focus motors, wireless video, with continuous handheld use
2 hrs - RED Helium Epic, 6k 13:1, 2 focus motors, wireless video, system test mode (non-stop motion on all three axis, driven by testing software on a testing stand)
5.75 hrs - Sony Alpha 7R IV 4k, 1 focus motor, wireless video, system test mode (non-stop motion on all three axis, driven by testing software on a testing stand)
###
MÅvi Pro
Qty 1 - MÅvi Pro Adjustable Camera Plate
Qty 1 - MÅvi Adjustable Top Camera Plate
Qty 1 - MÅvi Hot Shoe Mount
Qty 1 - COM to MÅvi Controller Receiver Cable
Qty 1 - MÅvi Rod Mount Adapter
Qty 2- Bolt …œ -16 x …
Qty 2 - Bolt ¼ -20 x ½
Qty 2 - Bolt ¼ -20 x …œ
Qty 1 - 2.00mm Hex Driver
Qty 1 - 2.50mm Hex Driver
MÅvi Ring Pro II
MÅvi Pro Landing Gear
MÅvi Pro SL4 Battery Kit
Qty 2 - SL4-Ground Battery (4.1Ah 6s)
Qty 2 - SL Battery Charger (USB C)
Qty 1 - MÅvi Pro to SL Battery Adapter (Pair)
Qty 1 - Travel Case
This is the most advanced camera movement system ever created. It offers industry leading performance, flexibility, and ease of use. And it's now shipping with SL4 batteries!
MÅvi Pro is a lightweight, flexible and portable system that allows users to create world class production quality video content quickly and easily.
Features:
Innovative structural design for ease of use, convenience, strength, versatility
Compatible with:
Original MÅvi Pro Batteries
SL4-Ground Batteries (included with this bundle)
TB50/55 batteries (with applicable adapters, not included)
Integrated focus / iris / zoom controller
Integrated screen for tuning / customization / monitoring
Increased motor torque
12-14v 6A D-Tap output for camera power
Dual 12V D-Tap output for accessory power (1A and 2A)
Ultra fast
Full stiffness and filter Autotune in ~5 seconds
MÅvi Pro mobile applications (iOS, Android)
Majestic Mode
Timelapse Mode
Dual GPS (top and bottom) for solid signal in Sky or GroundView
Full Red RCP2 integration with control of focus/iris (on EF lenses), ISO, start/stop, and more (with applicable RCP cable, not included)
Internal long range 2.4GHz frequency hopping radio for connection to MIMIC (MIMIC not included)
Multiple handle options:
MÅvi Ring Pro II (included)
Low Profile Handle (optional)
Classic Handle (optional)
###
Weight (w/o batteries): 2.65kg/5.84lbs
Camera cage dimensions: 196 x 200 x 175mm (L*W*H)
Maximum payload: 6.80kg/15 - 30lbs depending on application
Runtime with a pair of fully charged SL4 batteries (our testing, your mileage may vary!)
2.25 hrs - RED Helium Epic, 6k 13:1, 2 focus motors, wireless video, with continuous handheld use
2.25 hrs - RED Helium Epic, 8k 6:1, 2 focus motors, wireless video, with continuous handheld use
2 hrs - RED Helium Epic, 6k 13:1, 2 focus motors, wireless video, system test mode (non-stop motion on all three axis, driven by testing software on a testing stand)
5.75 hrs - Sony Alpha 7R IV 4k, 1 focus motor, wireless video, system test mode (non-stop motion on all three axis, driven by testing software on a testing stand)
###
MÅvi Pro
Qty 1 - MÅvi Pro Adjustable Camera Plate
Qty 1 - MÅvi Adjustable Top Camera Plate
Qty 1 - MÅvi Hot Shoe Mount
Qty 1 - COM to MÅvi Controller Receiver Cable
Qty 1 - MÅvi Rod Mount Adapter
Qty 2- Bolt …œ -16 x …
Qty 2 - Bolt ¼ -20 x ½
Qty 2 - Bolt ¼ -20 x …œ
Qty 1 - 2.00mm Hex Driver
Qty 1 - 2.50mm Hex Driver
MÅvi Ring Pro II
MÅvi Pro Landing Gear
MÅvi Pro SL4 Battery Kit
Qty 2 - SL4-Ground Battery (4.1Ah 6s)
Qty 2 - SL Battery Charger (USB C)
Qty 1 - MÅvi Pro to SL Battery Adapter (Pair)
Quickly mount your Pilot modules to the MÅVI Ring Pro (30mm tube). Rosette is parallel to the tube on this mount.
Features:
Lightweight aluminum design
Reversible rosette hardware
Quick release clamp
MÅVI Users like to customize and modify their rigs for their specific applications. This means mounting a variety of accessories to the 19mm carbon tubes. We have created the Pop-N-Lock line of quick release accessories to enable users to quickly set up their rigs with just about any accessory imaginable. The Pop-N-Lock mounting plate features a variety of mounting holes, and quick releases from the clamp using a ultra lightweight dovetail plate. Once your shoot is complete, you can quickly remove all accessories from the gimbal for quick tear down and packing.Features:
Ultra lightweight design
19mm dual tube quick release clamp
Quick release dovetail
¼-20 countersunk mount hole
¼-20 threaded mount hole
…œ-16 threaded mount hole
3mm mounting holes
Slots for velcro straps
Machined Aluminum Mounting plate
Weight: 29g (40g with aluminum mounting plate)
In the box:
19mm Dovetail QR
Dovetail Adapter Plate
Dovetail Quick Release Rail (qty=4)
Bolt M3 x 8 FHCS (qty=2)
Bolt ¼-20 x ½ in (qty=1)
Bolt ¼-20 x 3/8 in (qty=1)
Quickly mount your Pilot modules to any standard 30mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is perpendicular to tube on this mount.
Features:
Lightweight aluminum design
Reversible rosette hardware
Quick release clamp
Quickly mount your Pilot modules to any standard 25mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is parallel to tube on this mount.Features:
Lightweight aluminum design
Reversible rosette hardware
Quick release clamp
Smooth, precise Focus Iris or Zoom control with adjustable viscous damping. Connects directly to the MIMIC (not included) with included 6-pin COM cables.Features:
Ergonomic soft-grip knob
Rotary dial to vary stiffness
Removable marking ring
Removable hard stop
Status LED
Indicator dial
20mm rosette mounts
A/B buttons
Dual COM ports
USB-C port (for firmware updates)
Included:
1x Marking Ring
2x Pilot COM to COM cable - 200mm
2x Pilot COM to COM cable - 300mm
2x Pilot COM to COM cable - 500mm
Quickly mount your Pilot modules to any standard 25mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is perpendicular to tube on this mount.Features:
Lightweight aluminum design
Reversible rosette hardware
Quick release clamp
Freefly Pilot Iris/Zoom Module The Pilot Iris/Zoom Module has several inputs that can be mapped to Focus/Iris/Zoom as well as Pan/Tilt/Roll functions, through the MIMIC (not included). This module can be connected to a MIMIC using any length of our COM cables to suit your needs.
Features:
Industry standard precision 2-Axis force joystick
Linear slide potentiometer
Removable walnut handle
Adjustable/removable 20mm rosette mount
M3x16 mounting points
Two styles of (removable) joystick knob
A/B buttons
Dual COM ports
USB-C port (for firmware updates)
Included:
2x Pilot COM to COM cable - 200mm
2x Pilot COM to COM cable - 300mm
2x Pilot COM to COM cable - 500mm
1x L-Key Hex Tool
1x Alternate joystick knob
1x Rosette Mount
Purchasing an additional Toad (male adapter) allows for a MÅVI with the Toad In The Hole (female adapter) attached to quickly mount to other filming carriers, such as a crane, jib, or car mount in a matter of seconds. Fiddling around with alignment is not required when engaging the Quick Release - just attach and rotate to the desired angle (from 0-360°) for shooting. The Quick Release uses a clamp to secure the MÅVI. This clamp, along with the secondary release button, are used to release the MÅVI.Features:
Lightweight, low-profile design
6061-T6 CNC machined aluminum
Titanium Nitride coated catch / release for durability
Able to be mounted in any orientation (0-360º degrees)
Includes:
Qty 1 or Qty 3 - Toad (male adapter)
Qty 4 - M3 Socket head screws for mounting the Toad In The Hole to a Ninja Star
Suitable for:
MÅVI M5, MÅVI M10, MÅVI M15, MÅVI Pro
This adapter attaches to the end of the adjustable camera plate and allows for an ultra lightweight and low profile 15mm rod mount. This will allow you to easily mount focus motors without adding unnecessary weight / complexity.Specs:
Lightweight 6061-T6 aluminum rod mount
15mm rod mounts
17g weight
Includes:
Qty 1 - Rod mount
Qty 2 - M3 x8 screws for mounting to camera plate
Qty 2 - M3 x 8 screws for clamping rod
Qty 1 - 15mm x 30mm long carbon fiber rod
Qty 1 - 15mm x 50mm long carbon fiber rod
Qty 1 - 15mm x 70mm long carbon fiber rod
* NOTE: The Rod Mount Adapter is compatible with the MÅVI camera plate that has two threaded holes on one end.
Suitable for:
MÅVI M5, MÅVI M10, MÅVI M15
The Toad In The Hole Quick Release is a sleek, lightweight, low-profile quick release unit, which provides an easy mount and release solution for your MÅVI. It allows the operator to remove the MÅVI from the handle assembly and attach to any other method of filming carrier, such as a crane, jib, or car mount (with a Toad installed) in a matter of seconds. Fiddling around with alignment is not required when engaging the Quick Release - just attach and rotate to the desired angle (from 0-360°) for shooting. The Quick Release uses a clamp to secure the MÅVI. This clamp, along with the secondary release button, are used to release the MÅVI.
Features
Lightweight, low-profile design
Primary clamp and secondary safety catch release mechanism
6061-T6 CNC machined aluminum
Titanium Nitride coated catch / release for durability
Able to be mounted in any orientation (0-360º)
Includes
Qty 1 - Toad In The Hole Quick Release
Qty 4 - M3 Socket head screws for mounting the Toad In The Hole to a Ninja Star
Suitable for:
MÅVI M5, MÅVI M10, MÅVI M15, MÅVI Pro