65Wh NP-F Battery with D-tap and USB-C
LB-SF65C is a new 65Wh large capacity NP-F type DV battery with regulated 12V D-tap output and 25W USB-C in/out, widely compatible with pro-video gears.
65Wh Large Capacity
LB-SF65C consists of 6pcs battery cells and has 65Wh/9020mAh large capacity to keep your video devices powered for longer time. The constant power load is 30W/4A.
Reg. 12V D-tap Output
The LB-SF65C NP-F battery provides a D-tap power output socket of regulated 12V voltage, widely compatible with various kinds of video devices.* The D-tap has 7.2V to 12V (Reg.) conversion and it' s not allowed to charge input via this D-tap socket.
USB-C 25W Output
Fast Charging iPhone 12/13
LB-SF65C provides a USB-C sockets, supports 5V 3A, 9V 2.8A, 12V 2.1A, 15V 1.7A, 20V 1.3A, 25W power output to fast charge iphone 12/13 and all kinds of USB-C smart phones or tablets, with BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP multiple protocols.
USB-C 25W Charging Input
You can also charge LB-SF65C by USB-C charger. Supports PD 5V 3A, 9V 2.8A, 12V 2.1A, 15V 1.7A, 20V 1.3A, 25W power input, which means you can fully charge the 65Wh battery within 3.5 hours.
4-level Power Indicator
Press the power check bottom, the 4-level LEDs indicates remaining power percentage.
4-way Charging
LB-SF65C can be charged by any NP-F charger. Use the separately available SWIT LC-D421 4-way charger you can charge 4 batteries simultaneously, and fully charging within 5 hours.
###
Nominal Voltage
7.2V
Capacity
65Wh, 9.02Ah
Max power load
30W, 4A
D-tap
12V (reg.) 1.7A, 20W
USB-C
25W input: 5V 3A, 9V 2.8A, 12V 2.1A, 15V 1.7A, 20V 1.3A
25W output: 5V 3A, 9V 2.8A, 12V 2.1A, 15V 1.7A, 20V 1.3A
BC1.2, QC2.0/3.0, PD2.0/3.0, FCP, SCP
Original batteries
SONY NP-F770, NP-F970
Dimension
71—39—76mm
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease
when operating below 0°)
Net weight
Approx 345g
###
1x Swit LB-SF65C SONY L Series NP-F Battery Pack
ONE BATTERY, ONE DAY
PB-C420S reaches the world's largest capacity: 420Wh of handheld V-mount battery, long time power supply for cameras, monitors, lights and many power hungry devices of broadcast and film industry.
14.4V, 420Wh, 2x D-tap
PB-C420S consists of 24pcs Li-ion cells, 14.4V nominal voltage, 420Wh, 29.1Ah large capacity, and provides with 2x D-tap sockets at left and right side, for camera-top devices.
250W Constant High Load
PB-C420S outputs at least 250W/20A high load even at 1% capacity (Peak load up to 305W), to drive high power Cine cameras and on-camera devices together. The high load cells will also ensure battery life comparing to normal load batteries if long time full load output. Over current protection: 24A.
100W 6A Fast Charging
PB-C420S supports 100W/6A fast charging to save more than 50% charging time. The 420Wh battery can be charged from 0 to 80% after 3.9 hours, and fully charged within 5.3 hours.
Reliable SWIT Quality
The PB-C420S internal controller supports multiple protection circuit, to detect any abnormal conditions includes over load, over charging, over discharging, high temperature, short circuit, etc, and actively protect the devices from potential safely issue. SWIT battery will always be your reliable choice.
###
Nominal Voltage
14.4V
Capacity
420Wh/29.1Ah
Power Load
250W / 20A constant, 305W peak
Charging
DC 16.8V, 6A
D-tap
2x D-tap 150W/10A in total
Mount Type
V-mount
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)
Net weight
Approx 2.07kg
Dimensions
155—101—80mm
###
1x Swit PB-C420S 420Wh Large Capacity V-mount Battery
The smallest 140Wh V-mount battery you've ever seen! MINO-S140 is a pocket fit size large capacity battery with 65W USB-C socket, for cameras, monitors, accessories, tablets, laptops and all kinds of devices.
150W/12A High LoadMINO-S140 consists of 8 high capacity cells, with 140Wh/9.7Ah high capacity, and support at least 150W/12A constant high load output, for high power cine cameras and lights.
A Little Bigger, Much More CapacityComparing with the hot selling SWIT 98Wh Pocket V-mount battery, the new MINO-S140 provides 43% more capacity, but still with tiny size for convenient carrying.
D-tap, USB-A and USB-CThe tiny size MINO-S140 didn' t compromize on DC sockets.D-tap x1 - 150W/12A high load (Support charging input) USB-A x1 - 5V/2A outputUSB-C x1 - 65W output and 48W charging input
USB-C 48W Charging InputMINO-S140 battery can be charged by USB-C charger, supports PD 5V 2.4A, 9V 2.4A, 12V 2.4A, 15V 2.4A and Max 20V 2.4A, which means you can fully charge the 140Wh battery within 3.5 hours.
USB-C 65W Power OutputYou can power laptop via USB-C by MINO-S140 battery on location. Supports 5V 3.25A, 9V 3.25A, 12V 3.25A, 15V 3.25A and Max 20V 3.25A, BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP multiple protocols.(For Macbook Air/13, Macbook Pro 13/15/16, Huawei Matebook E/12/X13/XPRO, Thinkpad, HP, ASUS, Dell and almost all laptops with USB-C ports)
Wire-Free Internal TechMINO-S140 has innovative "Wire-Free internal tech. All the cells, D-tap, USB-A, USB-C, power indicator devices are directly soldered onto PCB, no connecting wires, to reduce internal resistance effectively, and make the circuit stable, safe, and reliable.
###
Battery plate
V-mount
Nominal voltage
14.4V
Capacity
140Wh, 9.7Ah
Power IN&OUT
Electrodes: 150W 12A out, 16.8V 3A in
D-tap: 150W 12A out, 16.8V 3A in
USB-A: 10W, 5V/2A out
USB-C: Max 65W out, 5V/9V/12V/15V/20V(Max) 3.25A
BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP
Max 48W in, 5V/9V/12V/15V/20V(Max) 2.4A
Dimension
105—79—55.5mm
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)
Net weight
713g
4x100W Super Fast ChargerPC-P461B can charge 4x B-mount batteries simultaneously at 33.6V/3A, 100W per channel super fast charging speed, save up to 60% charging time comparing to normal chargers.Compatible with pure 28.8V B-mount batteries and 14.4V/28.8V bi-voltage B-mount batteries.
Charging TimeTo charge 4x 290Wh B-mount batteries, the PC-P461B will take only 2 hours 30 minutes to charge to 80%, and take 3 hours 50 minutes to fully charge.
3.5-inch Color LCDPC-P461B provides a 3.5-inch color LCD panel to display charging progress, charging current and voltage, and battery cycle times of each channel.
Top Charging IndicatorsBesides LCD screen info, you can check the charging status at a glance by the 4 large size indicators on the top of the charger.Red on: 0-80%Green flashing: 81%-99%Green on: 100% fully chargedRed flashing: Charging error, check LCD info
Light Weight and PortableThe 4 channel fast charger PC-P461B has minimized the size and weight, and the new handle design makes the charger solid and easy to carry.
###
Power
Max 450W
Input
AC100V-240V 50/60Hz
Output
DC 33.6V, 3A—4
Applicable battery
B-mount battery
Dimensions
330—153—162mm
Net weight
2.43kg
ARRI Standard B-mount BatteryThe B-mount battery interface is a new industry standard endorsed by ARRI and the wider industry with high voltage support and reliable lock system.
28.8V for Cinema equipmentThe 28.8V (22-33.6V) high voltage matches with all ARRI cameras and lights, and high power cine equipment, it offers a reliable and longer battery life time.
290Wh Large CapacityThe HB-A290B battery has 290Wh / 10.05Ah large capacity, and at least 250W / 10A constant high load for cine cameras and other devices.
D-tap, USB-A and USB-CThe HB-A290B offers:
2x D-tap of regulated 16V, 60W/3.8A load;
1x USB-A 5V/2A;
1x USB-C 60W input and 60W output.
USB-C 60W Power OutputYou can power laptops via USB-C. Supports 5V 3A, 9V 3A, 12V 3A, 15V 3A and Max 20V 3A, BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP multiple protocols.(For Macbook Air/13, Macbook Pro 13/15/16, Huawei Matebook E/12/X13/XPRO, Thinkpad, HP, ASUS, Dell and almost all laptops with USB-C ports).
USB-C 60W Charging InputThe HB-A290B battery can be charged by USB-C charger, supports PD 15V 3A and 20V 3A, which means you can fully charge the 290Wh battery within 5.5 hours.
OLED Power Info DisplayThe HB-A290B battery has an OLED screen to display battery status and power information, includes power percentage, remaining running time, USB-A / USB-C status, and protection warning code if any abnormalities are detected.
100W Super Fast ChargingYou can charge 4x HB-A290B simultaneously on the SWIT PC-P461B B-mount charger, at 33.6V 3A, 100W super fast charging. The charger will take approx. 3 hours 50 minutes to fully charge 4x HB-A290B batteries.
LED Flash LightIf you double press the Power Check button it will switch on an LED flash light on the rear side of the battery, to help you to find the B-mount plate in dark environments.Double press the Power Check button again to switch the light off. It will also automatically switch off after 30 seconds.
1.2 meters Drop-off ProofThe HB-A290B battery can survive a fall from 1.2 meters at any angle.
###
Voltage
28.8V (21.6-33.6V)
Capacity
290Wh/10.05Ah
Constant load
250W / 10A
Max charging current
100W / 3A fast charging
Mount Type
B-mount
D-tap —2
16V regulated, 60W 3.8A load
USB-C
60W out 5V/9V/12V/15V/20V(Max) 3A
BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP
60W in 15V/20V(Max) 3A
USB-A
10W, 5V/2A
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)
Net weight
Approx 1.52kg
Dimensions
144—100—79mm
LB-SU98
Specifications
4.4V nominal voltage Li-ion battery
Compatible with SONY BP-U batteries
Display remaining power info in camera
98Wh / 6.8Ah capacity
Built-in 14.4V D-tap output / Charging input
Built-in 5V/2A USB output
4-level LED power indicator
Multiple circuit protections
SONY BP-U type Battery
LB-SU98 is the replacement battery for Sony BP-U60, compatible with SONY Camcorder PXW-FX9 / FS7 / FS5, PXW-Z280 / Z190 / X280.
98Wh / 6.8Ah High Capacity
With 14.4V nominal voltage, the LB-SU98 has 98Wh / 6.8Ah capacity, and can run approx. 3 hours on SONY PXW-FX9 camera.
Built-in D-tap DC Output Socket
A D-tap DC output socket is equipped on the side of LB-SU98 battery, for DC14.4V (Nominate) connection. You can connect on-camera LED light, monitor or wireless transmitter on the D-tap socket, and get power simultaneously with camera. The Max power from D-tap is 70W, 6A.The D-tap socket can also be used as charging input, by SWIT portable charger PC-U130B/B2.
Built-in 5V/2A USB Socket
Connect your USB devices like smart phone or pad to the USB socket of LB-SU98, press the power check button, and then the battery will start to output 5V/2A power to charge your devices.
LED Power Indicator
The LB-SU98 battery has the 4-level LED power indicators to check the battery remaining capacity. You can get a quick view of capacity before using. The power check button can also be used to trigger USB charging.
Easy Charging
The LB-SU98 can be charged on SWIT 2-ch charger S-3602U or 4-ch charger LC-D421. And you can also use SWIT PC-U130B/B2 Portable D-tap Charger for LB-SU98.By S-3602U/LC-D421 will take about 4 hours and 30 minutes to charge from empty to 100%.By PC-U130B/B2 will take 2 hours and 50 minutes to fully charge.
Nominal Voltage
14.4V
Capacity
98Wh, 6.8Ah
Max output power
Total: 70W, 6A
Pins: 70W, 6A
D-tap: 70W, 6A
USB: 5W, 2A
Compatible cameras
SONY PXW-FX9
SONY PXW-Z280, Z190
SONY PXW-FS5, FS7
SONY PXW-X280
Dimension
70—42—96mm
Net weight
Approx 427g
- Tiny V-mount battery, Pocket fit
- 45Wh/3.1Ah fly-friendly capacity
- Max 150W/12A constant load
- 1x D-tap output & charging input
- 1x USB 5V/2A output
- 5-step LED power indicator
- Power info for both SONY & RED
- Wire-Free internal technic
- Multiple circuit protections
Tiny V-mount battery
Pocket fit size
The brick size V-mount batteries are always too big and heavy for field shootings, especially the handheld stabi- lizers, focus puller monitor, portable LED panel, or small cameras.
PB-M45S Pocket V-mount battery is a perfect solution!
It's only a DV battery size, 45Wh capacity, and without any compromise on the DC sockets!
45Wh Fly Friendly
150W/12A constant high load
PB-M45S consists of 4pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 45Wh / 3.1Ah high capacity. You can take this battery in carry-on luggage to board airplane.The Constant load is as high as 150W, 12A, applicable for high power lightings.
Built-in D-tap and USB
The pocket size PB-M45S still has D-tap and USB sockets built-in. The D-tap socket share 100W/8A load DC output with the V-mount pins, and support charging input by SWIT PC-U130B2 dual D-tap charger.
The USB socket outputs 5V/2A for smart phone fast charging.
5-LED Power Indicator
Low battery warning
PB-M45S has 5-LEDs to indicator remaining power percentage. When remaining power is less than 10%, the last LED will flash automatically to remind changing battery.
3A Fast Charging
PB-M45S can be charged by all standard V-mount chargers and D-tap chargers. Max charging current is 3A. The following chargers are recommended:
1. S-3822S, Portable 2-ch Simultaneous ChargerCharge 2x PB-M45S: Approx. 75 min2. PC-U130B2, Ultra-Portable Dual D-tap head chargerCharge 1x PB-M45S: Approx. 75 minCharge 2x PB-M45S: Approx. 2 hours
Hot-Swap Adaptor
You can use 2x PB-M45S hot-swapable on cam- eras, by the Hot-swap Adaptor KA-M20S, to get a long time, uninterrupted power, and equivalent to a standard size V-mount battery.
Wire-Free Internal Tech
PB-M45S has innovative "Wire-Free internal technic. All the cells, D-tap, USB, power indicator devices are directly soldered onto PCB, no connecting wires, to reduce internal resistance effectively, and make the circuit stable, safe, and reliable.
Battery plate
V-mount
Nominal voltage
14.4V
Capacity
45Wh, 3.1Ah
Max output
In total: 150W
Electrodes: 150W, 12A
USB:10W, 5V/2A
D-tap: 100W / 8A
Dimension
100—74—34mm
Net weight
0.31kg
Max charging current
3A
Square shape design for Cine-cameras
PB-S series camera batteries are compact designed, shorter than normal V/Gold mount batteries, and match perfectly with most of the Cine-cameras.
146Wh /10.1Ah Capacity
Consists of 12pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 146Wh / 10.1Ah high capacity. Can run approx 5 hours for normal 30W cameras.
High Load for Cine Cameras
At least 200W / 16A load
PB-S146S provides at least 200W/16A high load even at 1% capacity, to drive high power Cine cam- eras and on-camera devices together. The high load cells will also ensure battery life comparing to normal load batteries if long time full load output. Over current protection: 18A
2— D-tap, 1— USB
PB-S146S provides 2x D-tap output sockets with 10A/120W load, and 1x USB 5V/2A socket, to power other on-camera devices together.
Digital Power Info
LCD display accurate remaining run time
The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.
LCD warning codes description
P01 - P13: The battery trigger protection function and it can be recovered;E01 - E03: Not recoverable error, please contact manufacturers to repair, do not disassemble the battery.When the battery rests over 10 days or runs out of power, it will enter sleep mode and the LCD will not display.Common battery protection codes:
P01: Run out of power, please charge the battery asap.P02: Over-voltage when charging, please remove the battery, discharge the battery to decrease voltage to recover.P03: Over-current when charging, please remove the battery, and it will recover after 30 seconds.P05-07: The load is too heavy, please remove the battery, and it will recover after 30 seconds.P08-09: Battery short circuit, please remover the battery and make sure electrodes are clean, and it will recover after 30 seconds.P10-13: Temperature protection, please remove the battery and place at room temperature to recover.
Battery plate V-mount
Nominal voltage 14.4V
Capacity 146Wh, 10.1Ah
Max output In total: 200W
Electrodes: 200W,16A
USB: 10W, 5V/2A
D-tap: 120W / 10A
Dimension 121—95—59mm
Net weight 0.878kg
Max charging current 5A
D-TAP socket number 2
USB socket number 1
SONY L series Replacement batterySimilar battery as SONY NP-F970Display remaining power info
S-8975 is the replacement battery for SONY NP-F970, compatible with SONY HVR-V1/Z1/Z7, DSR-PD190, HD1000E, etc. S-8975 can exchange digital info with the cameras, and display remaining power info on the camera viewfinder.
75Wh / 10.4Ah High CapacityWith 7.2V nominal voltage, the S-8975 has 75Wh / 10.4Ah capacity.
Build-in Pole-tap DC Output SocketA 5.5/2.1mm pole-tap DC output socket is equipped on the side of S-8975 battery, for DC 7.2V (Nominate) connection. You can connect on-camera LED light, monitor or wireless transmitter on the pole-tap socket, and get power simultaneously with camera.The Max power from the pole-tap is 30W, 4A.
4-level LED Power IndicatorThe S-8975 battery has the 4-level LED power indicators to checkthe battery remaining capacity. You can get a quick view of capacity before using.
Easy ChargingThe S-8975 can be charged on SWIT Dual channel charger S-3602F and SONY original charger. It takes about 5 hours and 50 minutes to charge from empty to 100%.
###
Nominal Voltage
7.2V
Capacity
75Wh, 10.4Ah
Max output power
Total
30W, 4A
Pins
30W, 4A
Pole-tap
30W, 4A
Applicable camera
SONY HVR-Z1/Z5/Z7/V1;
SONY DSR-PD150/170/190;
SONY NEX-FS100/700/EA50;
SONY NXR-MC2000/HD1000;
Net weight
Approx 334g
Dimensions
71—39—70mm
###
1x Swit S-8975
Pocket V-mount Batteries Extender
Hot swap application
KA-M20S is an extender plate for SWIT Pocket V-mount Batteries. Installed with 2x PB-M series batteries, the size is equivalent to a standard large capacity V-mount battery, and the KA-M20S plate can draw the 2 batteries one-by-one as hot swap mode, or use together as high load mode.
Two Power ModesHot Swap mode and High Load modeWhen the device power consumption is less than single PB-M battery Max load (PB-M98S 100W load), the KA-M20S would be "Hot Swap mode “ 2 batteries one-by-one using, and the free battery can be changed any time.When the device power consumption is more than single PB-M battery Max load (PB-M98S 100W load), the KA-M20S would be "High Load mode “ 2 batteries using together, and none of the batteries can be removed.The Hot Swap mode and High Load mode can be automatically switched according to current power consumption of the device.
Power/Hot Swap Indicators
There're independent power indicators for both batteries. The flashing of top power LED indicates this battery is discharging. And the flashing of EMPTY LED means this battery is empty and need to change in time.
2 D-tap Power OutputThere're 2 D-tap sockets on the top side and right side of the KA-M20S plate, for flexible connection to various cameras.
###
Input
SWIT PB-M series Pocket V-mount Batteries x2
Output
V-mount 11-16.8V
D-tap x2, 11-16.8V
Max Load
Hot swap mode
V-mount: Max load of the single smaller battery
D-tap: Max load of the single smaller battery and limited 150W/10A
High load mode
V-mount: Max load of the single smaller battery x2
D-tap: Max load of the single smaller battery x2 and limited 150W/10A
Working temperature
-20°C ~ 50°C
Dimension
148—108—28mm
Net weight
238g
###
1x Swit KA-M20S
PRODUCT OVERVIEW
4-channel DV Charger2A per channel
LC-D421 can charge 4 DV batteries simultaneously, with 2A charging current per channel. Users can exchange different types of battery plate to charge different types of DV batteries together.
Exchangeable DV Plates
Snap-on type quick exchangeable DV battery plates designed; support the following types of battery plates:
Plate model
Applicable batteries
KA-C10U
SONY BP-U series, SWIT S-8U65, S-8U95
KA-C10F
SONY NP-F series, SWIT S-8972, S-8970, S-8770
KA-C10D
Panasonic VBD/CGA seriesï¼›SWIT S-8D98, S-8D58, S-8D62
KA-C10B
Panasonic VBG series, SWIT S-8BG6
KA-C10C
Canon BP series, SWIT S-8945, S-8845
KA-C10I
JVC SSL series, SWIT S-8I75, S-8I50
KA-C10V
JVC BNV series, SWIT S-8823
KA-C10E
Canon LP-E6, SWIT S-8PE6
LED Charging Indicators
LC-D421 charger has 4-LED indicators for each charging channel, and display the real-time battery capacity level.In case of the 4 LEDs are all flashing or all off, please check the connection condition of the batteries and plates, and restart the charger.
FEATURES
— 4-ch simultaneous charging— 2A charging current per channel— Snap-on exchangeable DV plates— Mixed types of DV batteries charging— U/F/D/B/C/I/V/E plates supported— 4-LED charging indicators
Ultra portable Single Channel Charger3A, for V-mount batteries
The PC-U130S consists of an AC-DC power module and a DC cable to connect with the pins of V-mount batteries. The single channel charger offers DC 14-16.8V, 3A fast charging output.
LED Charging IndicatorThe PC-U130S has an LED charging indicator. It's red during charging, and turn to green when charging finished.
FEATURES
V-mount battery charger
Single channel charging
3A fast charging current
LED charging indicator
Ultra portable
###
Power
MAX 50.4W
Input
AC 100V-240V 50/60Hz
Output
DC 14V-16.8V, 3A
Applicable battery
V-mount battery
Dimension
110—50—32mm
Weight
0.26kg
PRODUCT OVERVIEW S-7200USONY BP-U DV Battery Plate with Clamp— SONY BP-U DV battery adaptor plate— SWIT S-8U63 and SONY BP-U60/U30 fit— 5.5/2.1mm Pole-tap 14.4V DC output socket— With clamp to fix on camera handle or tripod
S-7200PPanasonic CGA DV Battery Plate with Clamp
— Panasonic CGA DV battery adaptor plate— SWIT S-8D62 and Panasonic CGA-D54/D28 fit— 5.5/2.1mm Pole-tap DC output socket— With clamp to fix on camera handle or tripod
S-7200CCanon BP DV Battery Plate with Clamp
— Canon BP DV battery adaptor plate— SWIT S-8845/S-8945 and Canon BP-945/BP-970G fit— 5.5/2.1mm Pole-tap DC output socket— With clamp to fix on camera handle or tripod
S-7200DPanasonic CGA/VBD DV Battery Plate with Clamp
— Panasonic CGA/VBD DV battery adaptor plate— SWIT S-8D62 and S-8D58 fit— Panasonic CGA-D54/D28 and VW-VBD58 fit— 5.5/2.1mm Pole-tap DC output socket— With clamp to fix on camera handle or tripod
S-7200FSONY NP-F DV Battery Plate with Clamp
— SONY NP-F DV battery adaptor plate— SWIT S-8972/S-8970/S-8770 and SONY NP-F970/F-770 fit— 5.5/2.1mm Pole-tap DC output socket— With clamp to fix on camera handle or tripod
S-7200JJVC BN-V DV Battery Plate with Clamp
— JVC BN-V DV battery adaptor plate— SWIT S-8428 and JVC BN-V428U fit— 5.5/2.1mm Pole-tap DC output socket— With clamp to fix on camera handle or tripod
PRODUCT OVERVIEW
S-7006VJVC BN-VF Battery Plate for S-1073F
— JVC BN-VF DV battery adaptor plate— SWIT S-8823 and JVC BN-VF823 fit— SWIT S-1073F monitor installation— With DC plug for monitor
S-7006ECanon LP-E6 Battery Plate for S-1073F
— Canon DSLR battery adaptor plate— SWIT S-8PE6 and Canon LP-E6 fit— SWIT S-1073F monitor installation— With DC plug for monitor
S-7006IJVC SSL Battery Plate for S-1073F
— JVC SSL DV battery adaptor plate— SWIT S-8i50 / S-8I75 and JVC SSL-JVC50 fit— SWIT S-1073F monitor installation— With DC plug for monitor
S-7006DPanasonic CGA/VBD Battery Plate for S-1073F
— Panasonic CGA/VBD DV battery adaptor plate— SWIT S-8D62 and S-8D58 fit— Panasonic CGA-D54/D28 and VW-VBD58 fit— SWIT S-1073F monitor installation— With DC plug for monitor
S-7006BPanasonic VW DV Battery Plate for S-1073F
— Panasonic VW DV battery adaptor plate— SWIT S-8BG6 and Panasonic VW-VBG6 fit— SWIT S-1073F monitor installation— With DC plug for monitor
S-7006USONY BP-U DV Battery Plate for S-1073F
— SONY BP-U DV battery adaptor plate— SWIT S-8U63/93, SONY BP-U60/U30 fit— SWIT S-1073F monitor installation— With DC plug for monitor
S-7006FSONY NP-F Battery Plate for S-1073F
— SONY NP-F DV battery adaptor plate— SWIT S-8972/S-8970/S-8770 fit— SONY NP-F970/F-770 fit— SWIT S-1073F monitor installation— With DC plug for monitor
S-7006CCanon BP DV Battery Plate for S-1073F
— Canon BP DV battery adaptor plate— SWIT S-8845/S-8945 and Canon BP-945/BP-970G fit— SWIT S-1073F monitor installation— With DC plug for monitor
S-7006SV-mount battery plate for S-1073F
— V-mount battery adaptor plate— Fit for SWIT S-1073F monitor— 2-pin DC plug for monitor board— Reliable power connection