De Kramer TP-574 is een DGKat twisted pair ontvanger voor HDMI, bidirectionele RS-232 en infraroodsignalen. De TP-573 converteert de ingangssignalen naar een twisted pair signaal en de TP-574 converteert het terug naar HDMI, RS-232 en infraroodsignalen.
Gegevenssnelheid - 4.95Gbps (1.65Gbps per grafisch kanaal).
Compatibel met HDTV.
Voldoet aan HDCP.
HDMI ondersteuning - x.v.Color, lipsynchronisatie, HDMI ongecomprimeerde audiokanalen, Dolby TrueHD, DTS-HD.
3D doorgifte.
EDID PassThru - Geeft EDID-signalen door tussen de bron en het scherm.
Bidirectionele RS-232 en IR interface. - 38400 max. baudrate.
Systeembereik - Tot 90m (295ft) bij 1080i @60hz of tot 70m (230ft) bij 1080p @ 60hz bij gebruik van Kramer DGKat kabels.
Opmerking: Het zendbereik is afhankelijk van de gebruikte signaalresolutie, grafische kaart en beeldscherm. Als u CAT-kabels met afscherming van derden gebruikt, moeten beide uiteinden van de afscherming aan de connectoren worden gesoldeerd voor een goede werking van de producten.
DGKat Signaalintegratie - Kramers unieke technologie voor het converteren van TMDS en besturing en communicatie naar signalen die lopen over twisted pair kabels.
Power Connect System„ - Een enkele aansluiting op de zender voorziet beide units van stroom.
Compacte DigiTOOLS - 3 units kunnen naast elkaar in een 1U rack worden gemonteerd met de aanbevolen rackadapter.
###
INPUTS
1 CAT 5 IN on an RJ“45 connector
OUTPUTS
1 HDMI connector, 1 bidirectional IR port on a 3.5mm mini jack, 1 bidirectional RS“232 port on a 9“pin D“sub connector
BANDWIDTH
4.95Gbps (1.65Gbps per graphic channel)
COMPLIANCE WITH HDMI STANDARD
Supports HDMI and HDCP
POWER CONSUMPTION
12V DC from TP“573
Product Dimensions
12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
Product Weight
0.2kg (0.4lbs) approx.
Shipping Dimensions
49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H
Shipping Weight
0.4kg (0.8lbs) approx.
###
1x Kramer TP-574
Magewell Pro Convert HDMI Plus Module
Zet een HD HDMI ingangssignaal om in NDI® met hoge bandbreedte en doorlussen.Een hot-swappable module voor installatie in Magewell Modator chassisOndersteunt tot 4096x2160 60fps (4:2:0) of 30fps (4:4:4), door deze te downconverteren naar HD NDICentraal beheerbaar via het Modator-chassis en de Magewell Control Hub
###
Invoer- en doorlusfuncties
Ondersteuning voor maximaal 4096x2160 4:4:4/4:2:2 30fps of 4:2:0 60fps HDMI-invoer en doorlussenOndersteunt 8-kanaals HDMI-ingebedde audio
NDI® coderingsfuncties
Ondersteuning voor maximaal 2048x2160 120fps 4:2:2 8-bits NDI-coderingVerstuurt NDI-streams over netwerksegmentenCodeert 8-kanaals NDI-ingebedde audioOndersteunt NDI 5.x
Functies en voordelen
Zeer lage latentieConfigureren via het aanraakscherm van het Magewell Modator chassis, Web GUI of Control HubHTTP-gebaseerde API's voor integratie op maat
VP427X is a highperformance autoswitcher/scaler receiver for 4K HDMI„ over longreach HDBaseT and a local HDMI input. VP427X receives the HDBaseT signal from a compatible transmitter, converts it to HDMI and up or downscales the picture to any resolution up to 4K@60HZ (4:4:4) set by the user or automatically matching the resolution of the HDMI monitor. VP427X enables extending video signals to up to 40m (130ft) over CAT copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions.
HDMI Signal Extension ” HDCP 1.4 / 2.2. 4K60, CEC, xvYCC color (on input).
Audio De“embedding ” Output the HDMI audio to a balanced stereo output.
Bidirectional RS“232 Extension ” Serial interface data flows in both directions, allowing data transmission and device control.
Includes relay outputs and easy connection to occupancy sensors and contact closure switches.
I“EDIDPro„ Kramer Intelligent EDID Processing„ ” Intelligent EDID handling, processing and pass“through algorithm that ensures Plug and Play operation.
ProcAmp Control ” Contrast, brightness, color, etc.
Freeze button.
Convenient Unit Control and Configuration Options ” Local control via front panel source switching buttons and OSD menu. Distance control via RS“232 serial commands transmitted by a PC, touch screen system or other serial controller and relay switches.
Easy, Cost“effective Maintenance ” Local firmware upgrade via USB connector.
Easy and Elegant Installation ” Compact MegaTOOLS„ fan“less enclosure for dropped“ceiling mounting, or side“by“side mounting of 2 units in a 1U rack space with the recommended rack adapter.
Top of Form
APPLICATIONS
Classrooms and lecture halls
Meeting rooms
Training facilities
Collaborative classrooms
Any space where BYOD support is required
###
INPUTS
1 HDBaseT: On an RJ“45 connector
1 HDMI: On a female HDMI connector
OUTPUTS
1 HDMI: On a female HDMI connector
1 Balanced Audio: On a 5“pin terminal block connector
PORTS
1 Control RS232: On a 3“pin terminal block connector
1 Data RS232: On a 3“pin terminal block connector
1 Remote ContactClosure: On a 4 pin terminal block connector
1 Relay: On a 3“pin terminal block connector
1 Program USB: On a USB“A connector for firmware upgrade
VIDEO
Max Data Rate (on the HDMI ports): 18Gbps
Max Resolution (on HDMI ports): 4K@60Hz (4:4:4)
HDMI Support: 4K60, CEC, xvYCC color
Content Protection: HDCP 1.4 and 2.2
Output Resolutions: 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x768@60Hz, 1280x800@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1200@60Hz RB, 2560x1600@60Hz RB, 1920x1080@60Hz, 1280x720@60Hz, 2048x1080@50/60Hz, 2560x1440@60Hz RB, 720x480p@60Hz, 720x576p@50Hz, 1280x720p@50/60Hz, 1920x1080p@24/25/30/50/60Hz, 2560x1080p@50/60Hz, 2K@24/25/30/50/60Hz, 4K@24/25/30/50/60Hz
EXTENSION LINE
Up to 40m (130ft): At 4K@60Hz (4:2:0)
Up to 70m (230ft): At full HD (1080p@60Hz)
EXTENDED RS-232
Baud Rate: 300 to 115200
POWER
Source: PoE or 12V DC Adapter
Consumption: 1A
USER INTERFACE
Control: Input selection buttons, remote contact“closure switches, relay switches. Kramer API via RS“232 serial commands transmitted by a PC, touch screen system or other serial controller, embedded web pages via LAN for configuration and control
Indicators: Power, link, input selection LEDs
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +40°C (32° to 104°F)
Storage Temperature: “40° to +70°C (“40° to 158°F)
Humidity: 10% to 90%, RHL non“condensing
ENCLOSURE
Size: MegaTOOLS®
Type: Aluminum
Cooling: Convection ventilation
STANDARDS COMPLIANCE
Safety: CE
Environmental: FCC
ACCESSORIES
Included: Power adapter, rubber feet, bracket set
PRODUCT DIMENSIONS
18.75cm x 14.50cm x 2.54cm (7.38" x 5.71" x 1.00" ) W, D, H
PRODUCT WEIGHT
0.9kg (1.9lbs) approx.
SHIPPING DIMENSIONS
35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H
SHIPPING WEIGHT
1.4kg (3.1lbs) approx.
OSPSM10S is a pair of fiber optic transceivers for 1270/1330nm singlemode signals. These standard pluggable SFP+ optical modules have one LC connector for reception and transmission of signals over one strand of singlemode optical fiber.
Certified Transceiver ” Kramer certified, hot“pluggable, simplex SFP+ optical modules, for high“quality transmission of 10.2Gbps signal over single“mode fiber cable, connecting 1 single“mode fiber strand via LC PC/UPC connector.
###
GENERAL
Optical Line: Single“mode G.652D compliant OFNR fiber
Nominal Peak Wavelength: Module A: 1270 transmitter /1330nm receiver
Module B: 1330 transmitter /1270nm receiver
Max. Data Rate: 10.2Gbps
Transmitter Type: DFB
Optical Typical Transmission Power: “5dBm
Optical Typical Maximum Receiver Sensitivity: “14dBm
Optical Typical Maximum Loss Budget: 9dB
PORTS
1 Optical: On single“strand LC“connected single“mode fiber
Note: Do not use with LC(APC) cable connectors
EXTENSION LINE
Max. Reach: 20Km (12.4 miles) reach over OS1 SM fiber
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
Quality: IEEE 802.3ae, SFF“8431, SFF“8472
Laser Safety: Laser Class I
Safety: FDA CDRH 1040.10, TUV EN60950“1 and EN60825“1/2, UL and CSA EN60950“1, RoHS, EMC EN 55032 and EN 55024
POWER
Consumption: 1W
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to 70°C
Storage Temperature: “40° to 85°C
Humidity: 5% to 95% RH
PRODUCT DIMENSIONS
1.33cm x 5.70cm x 0.85cm (0.52" x 2.24" x 0.33" ) W, D, H
PRODUCT WEIGHT
0.1kg (0.1lbs) approx.
SHIPPING DIMENSIONS
12.60cm x 8.40cm x 4.10cm (4.96" x 3.31" x 1.61" ) W, D, H
SHIPPING WEIGHT
0.1kg (0.2lbs) approx.
De Middle Things Fiber Dispatch 5 is ontworpen voor workflows met meerdere camera's op locatie en converteert 5 paar SDI In/Out 4K videosignalen naar 5 optische vezeluitgangen, met behulp van robuuste Neutrik OpticalCon Duo connectoren.
Standaard 1U rack-ontwerp
Dankzij het compacte 1U rackontwerp past de Fiber Dispatch converter perfect in je bestaande videorek, zodat je tot 5 camera's kunt aansluiten met de Fiber Camera Box. Ingebouwde ventilatoren zorgen voor een goede koeling van alle converters voor een probleemloze workflow.
Gemaakt voor efficiëntie en 4K over lange afstanden
Heb je ooit de tijdrovende taak gehad van het trekken van twee verschillende SDI-kabels naar een enkele camera , een voor de input en een voor de return feed? De Fiber Dispatch 5 voegt elk van deze kabelparen samen in een enkele optische vezelkabel, die lichter en veel betrouwbaarder is dan de traditionele koperen BNC-kabels omdat hij ongevoelig is voor alle elektromagnetische storingen. Je kunt je glasvezelkabel duizenden kilometers laten lopen zonder uitval.
Veelgebruikte standaard glasvezelconnector
De Neutrik Optical ConDuo connector maakt deze converter compatibel met zowel de veelgebruikte LC / LC vezelkabels als de robuuste Optical Con Advanced Duo & Duo Lite kabels van Neutrik, ontworpen voor gebruik op locatie en zware omstandigheden. De connector heeft een ingebouwde automatische afsluiting die de vezelkernen beschermt zodra de kabel wordt losgekoppeld.
Veel mogelijkheden met de Middle Fiber-producten
In combinatie met een Fiber Camera Box, een Fiber Unite of een Fiber Bridge zijn er vele configuraties mogelijk die je dagelijkse multicamera workflow sterk zullen verbeteren!
De Fiber Dispatch 5 kan worden gebruikt met de Middle Things Fiber Camera Box 6G, Bridge 5, Bridge 10 en de Blackmagic Mini Converter Optical Fiber 12G converter met 6G SFP-modules.
Het ondersteunt single mode LC optische vezelkabels, evenals Neutrik OpticalCon Duo en OpticalCon Duo Lite kabels.
Ondersteunde SDI-videosignalen zijn 3G, 6G en 12G (max 2160p30 ).
###
I/O-aansluitingen: 5x SDI In, 5x SDI Out, 5x Neutrik OpticalCon Duo LC , AC voeding.
Ingangsspanning : 85 V ~ 264 V AC
Stroomverbruik:
Type vezel : Enkelvoudige modus
Hoogte : 4.5cm / 1.8 inch
Breedte : 48cm /18.9 inch
Diepte: 22.5cm / 8.9 inch
Gewicht: 2.5kg / 5.5 lbs
Opslag Temperatuur : 14 tot 140°F / -10 tot 60°C
Gewicht verpakking: 3kg / 6.6 lb
Afmetingen doos (LxBxH) : 52cm x 25cm x 8cm | 20.5"x 9.84" x 3.15"
###
1x 1U Fiber Dispatch 5 12G
WP 20CT is is an intelligent 2x1 automatic wallplate switcher transmitter over longreach HDBaseT for 4K USBC and HDMI video signals. WP 20CT offers an intelligent switching experience with builtin Maestro room control and the standard priority / lastconnected switching function based on active video signal detection.
High Performance Switcher Transmitter ” Professional HDBaseT Switcher transmitter for providing long“reach signals over twisted pair copper infrastructures. This switcher transmitter is a standard transmitter that can be connected to any market“available HDBaseT“compliant extension product.
Simple and Powerful Maestro Room Control ” Out“of“the“box configured room control for a typical meeting room setup, and intuitive user interface enables you to control your meeting room elements. Room devices are controlled, locally or remotely via HDBaseT, right out“of“the“box by an extensive range of triggers, including input/output connectivity and routing. By minimizing user intervention, Maestro room control saves meeting prep time and minimizes human error before presentations.
Automatic Display Operation ” Part of the out“of“the“box Maestro configured room automation. Meeting presentation is simplified by automatically turning ON/OFF a CEC“enabled display when the presentation source is plugged in / unplugged with user“defined shut“down delay.
BYOD Ease and Convenience ” Connect any DP“Alt“Mode“capable USB“C device as an AV presentation source, while providing the connected device, if PD“2.0“capable, with up to 60 watts of power (with the use of an optional 20V power supply).
Plug & Play Auto Switcher ” Automatically plays the switched user device source signal on the connected display according to user“configured preferences, such as priority or last“connected input. When the user manually switches, by pressing a button, the auto switching is overridden.
HDMI„ Signal Switching ” HDCP 2.3 compliant, supporting deep color, x.v.Color„, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS“HD, 2K, 4K, and 3D as specified in HDMI 2.0.
I“EDIDPro„ Kramer Intelligent EDID Processing„ ” Intelligent EDID handling, processing, locking and pass“through algorithm ensures plug & play operation for HDMI source and display systems.
Multi“channel Audio Switching ” Up to 8 channels of digital stereo uncompressed signals for supporting studio“grade surround sound.
Audio De“embedding ” The digital audio signal passing“through to the output, is de“embedded, converted to an analog signal and sent to the stereo analog audio output. This enables playing the audio on locally connected speakers, in parallel to playing it on the speakers connected to the AV acceptor device (such as TVs with speakers).
Bidirectional RS“232 Extension ” Serial interface data flows in both directions, allowing data transmission and device control.
Reliable PoE (Power over Ethernet) Powering ” Auto“senses the HDBaseT extension line PoE status, it accepts power from a remote PoE provider such as a PoE matrix, with optional mains powering from connected power adapter.
Cost“effective Maintenance and Management ” Status LED indicators for Power, HDMI, and HDBT ports facilitate easy local maintenance and troubleshooting. Local device management using built“in web interface via the USB“C connection . Local firmware upgrade via USB“C and RS“232 connection tool ensure lasting, field“proven deployment.
Easy Installation ” Compactly fits into standard US, EU and UK 1“gang in“wall box size, supporting decorative integration with room deployed user interfaces such as electrical switches. Wall“plate installation is fast and cost“effective via a single twisted pair cable, providing both video signal and power (PoC) connections.
Top of Form
APPLICATIONS
Podium“mounted switcher in lecture halls, training rooms, auditoriums and hospitality applications.
Wall“mounted switcher within any AV distribution system.
Multimedia and presentation source selection in various enterprise applications.
INPUTS
1 DP Alt Mode & PD 3.0 USB-C: On a USB type“C connector
1 HDMI: On HDMI connector
OUTPUTS
1 HDBaseT: On an RJ“45 connector
1 Unbalanced Stereo Audio: On 3“pin terminal block connector
PORTS
1 RS-232: On a 3“pin terminal block for serial link extension
1 RS-232: On a 3“pin terminal block for device serial control
1 DC Power Input: On a two pin terminal block connector
POWER
Standby Power Savings: 12V: ~5W
Standby Power Savings: 20V: ~71W
Source: 12V DC 2A (included)
Source: 20V DC 6A (optional)
Source: PoE
Consumption: 12V: 0.6A
Consumption: 20V: 3.7A
VIDEO
Max. Data Rate: 10.2Gbps (3.4Gbps per graphic channel)
Max. Resolution: 4K@60Hz (4:2:0) 24bpp resolution
HDMI Support: Deep color, x.v.Color„, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS HD, 2K, 4K, and 3D as specified in HDMI 2.0
Compliance: HDCP 2.3 & 1.4
EXTENSION LINE
Up to 40m (130ft): At 4K @60Hz (4:2:0)
Up to 70m (230ft): At full HD (1080p @60Hz 36bpp)
Note: When using Kramer HDBaseT cables
Compliance: HDBaseT 1.0
EXTENDED RS-232
Baud rate: 300 to 115200
CONTROL RS-232
Baud Rate: 115200
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +40°C (32° to 104°F)
Storage Temperature: “40° to +70°C (“40° to 158°F)
Humidity: 10% to 90%, RHL non“condensing
ENCLOSURE
Cooling: Convection
Type: Aluminum
Size: 1 Gang
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
Environmental: RoHs, WEEE, and CE
ACCESSORIES
Included: 12V Power adapter
PRODUCT DIMENSIONS
US: 6.98cm x 3.10cm x 11.43cm (2.75" x 1.22" x 4.50" ) W, D, H
EU, UK: 8.00cm x 3.10cm x 8.00cm (3.15" x 1.22" x 3.15" ) W, D, H
PRODUCT WEIGHT
US: 0.1kg (0.2lbs) approx.
EU, UK: 0.1kg (0.1lbs) approx.
SHIPPING DIMENSIONS
EU, UK: 23.20cm x 13.60cm x 10.00cm (9.13" x 5.35" x 3.94" ) W, D, H
SHIPPING WEIGHT
EU, UK: 0.6kg (1.3lbs) approx.
Kramer Network is an enterprise management platform that lets IT and AV professionals easily deploy, configure and manage an entire Pro AV installation from anywhere in the network, including Dante„ and 3rd party devices.
Simple and Intuitive AV Routing ” Complete centralized or distributed routing of virtual and / or physical matrixes.
Quick and Efficient Device Management ” With instant auto detect, status update, and configuration for any Kramer or Dante IP device on the network.
Easily Trackable Device Firmware Management ” Manage all FW versions, automatically receive new version notifications and execute updates from a centralized location with one click.
Enhanced Security ” With LDAP user authentication and advanced user management, enabling you to create different levels of access for different users.
Simple and Powerful Maestro Room Automation ” Intuitive user interface enables you to fully automate your meeting room elements. Configure lights, shades, devices and more to be activated by an extensive range of triggers, including scheduling, input/output connectivity, routing, and button pressing. By minimizing user intervention, Maestro room automation saves meeting prep time and minimizes human error before presentations.
Detailed Site Topology ” Easily drill down to visually examine a specific location.
Convenient Video Preview ” View live video from connected displays, right from the Kramer Network interface.
Device Scan Across Subnets ” Scan and discover devices across different subnets.
Intuitive Video Wall Management ” Select the monitor configuration that fits your requirements. Click the Identify button to display the position number of each video wall screen as an overlay on that screen.
Kramer Control Integration ” Send Kramer Network commands from Kramer Control to trigger Maestro room automation actions, for example, to activate scenarios.
Live Alert and Response ” Proactive notifications such as email and SMNP traps keep you informed of issues in your system.
Fully Customizable Scripts ” Increase the functionality of your system by creating custom scripts in almost any language to provide for the specific needs of a project.
Constant System Optimization and Improvement ” All system events are recorded in the logs, enabling reports to be generated to analyze past usability and plan future adaptation and optimization.
Fast Initial Setup ” Install and start using the platform in minutes with no need for programming.
Integrated Room Scheduling and Management ” synchronized with your Outlook.
Multi“lingual Support.
Online Help.
Top of Form
APPLICATIONS
Meeting rooms across multiple buildings
Education, university classrooms and lecture halls
Digital signage with multiple AV sources to multiple displays
Control rooms and broadcast
Sports bars
VERIFIED SUPPORTED OPERATING SYSTEMS
Windows 10 Pro / Enterprise, 64 bit
Windows Server 2012 R2, 64 bit
Windows Server 2016, 64 bit
Windows Server 2019, 64 bit
CONFIGURATIONS
MODEL
DESCRIPTION
KN“5D“LIC
Kramer Network platform ” up to 5 devices
KN“30D“LIC
Kramer Network platform ” up to 30 devices
KN“100D“LIC
Kramer Network platform ” up to 100 devices
KN“UPG“30D“LIC
Additional 30 devices for Kramer Network platform
KN“UPG“100D“LIC
Additional 100 devices for Kramer Network platform
KN“UNLTD“LIC
Kramer Network platform ” unlimited devices
KN“SWUPT“365“5D“SUB
Annual Software Updates Subscription for 5 Devices
KN“SWUPT“365“30D“SUB
Annual Software Updates Subscription for 30 Devices
KN“SWUPT“365“100D“SUB
Annual Software Updates Subscription for 100 Devices
The PT572+ is a DGKat„ twisted pair receiver for HDMI signals. The PT571 converts an HDMI signal to a single twisted pair signal and the PT572+ converts the twisted pair signal back to an HDMI signal.
Max. Data Rate ” 4.95Gbps (1.65Gbps per graphic channel).
HDTV Compatible.
HDCP Compliant.
DGKat„ Signal Integration ” Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
HDMI Support.
3D Pass“Through.
System Range ” Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables.Note: Transmission range depends on the signal resolution, graphics card and display used. If using third“party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly.
EDID PassThru ” Passes EDID signals between the source and display.
Status LED ” Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached.
Power Connect„ System ” A single connection to the transmitter or the receiver powers the system when the devices are within 90m (295ft) of each other.
Ultra“Compact Pico TOOLS„ ” 4 units can be rack mounted side“by“side in a 1U rack space with the recommended rack adapter.
Top of Form
APPLICATIONS
Board, conference, and training rooms.
Presentation systems.
Signal distribution and home theater.
###
INPUTS
1 RJ“45 connector
OUTPUTS
1 HDMI connector
BANDWIDTH
4.95Gbps (1.65Gbps per graphic channel)
COMPLIANCE WITH HDMI STANDARD
Supports HDMI and HDCP
POWER CONSUMPTION
12V DC, 250mA
INCLUDED ACCESSORIES
Power supply
PRODUCT DIMENSIONS
6.22cm x 5.18cm x 2.44cm (2.45" x 2.04" x 0.96" ) W, D, H
PRODUCT WEIGHT
0.1kg (0.2lbs) approx.
SHIPPING DIMENSIONS
15.70cm x 12.00cm x 8.70cm (6.18" x 4.72" x 3.43" ) W, D, H
SHIPPING WEIGHT
0.4kg (0.8lbs) approx.
DVIOUT8F64 is an eightchannel DVI output card for the VS6464 Series Modular MultiFormat Digital Matrix Switchers. The DVIOUT8F64 outputs eight DVI signals from the chassis.
Max. Data Rate ” 4.95Gbps (1.65Gbps per graphic channel).
DVI Rev. 1.0.
###
OUTPUTS
8 DVI“D on Molex 24“pin (F) connectors
BANDWIDTH PER CHANNEL
1.65Gbps
TOTAL BANDWIDTH
4.95Gbps
MAXIMUM RANGE
15m (49ft)
POWER CONSUMPTION
9W
3D PASS THROUGH
Not supported
OPERATING TEMPERATURE
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE
“40° to +70°C (“40° to 158°F)
HUMIDITY
10% to 90%, RHL non“condensing
STANDARD COMPLIANCE
DVI 1.0
SAFETY REGULATORY COMPLIANCE
CE, FCC
ENVIRONMENTAL REGULATORY COMPLIANCE
Complies with appropriate requirements of RoHs and WEEE
PRODUCT DIMENSIONS
39.50cm x 18.00cm x 2.00cm (15.55" x 7.09" x 0.79" ) W, D, H
PRODUCT WEIGHT
0.5kg (1.0lbs) approx.
SHIPPING DIMENSIONS
47.70cm x 23.50cm x 4.80cm (18.78" x 9.25" x 1.89" ) W, D, H
SHIPPING WEIGHT
0.8kg (1.8lbs) approx.
HDCPIN8F64 is an eightchannel HDMI over DVI (HDCP) input card for the VS6464 Series Modular MultiFormat Digital Matrix Switchers. The HDCPIN8F64 inputs eight HDMI/HDCP signals into the chassis.
Max. Data Rate ” 6.75Gbps (2.25Gbps per graphic channel).
HDCP Compliant.
HDMI Support.
3D Pass“Through.
DVI Connectors.
Top of Form
APPLICATIONS
Conference rooms
Rental and staging
###
INPUTS
8 DVI“D on DVI Molex 24“pin (F) connectors
BANDWIDTH PER CHANNEL
2.25Gbps
TOTAL BANDWIDTH
6.75Gbps
POWER CONSUMPTION
20.5W
3D PASS THROUGH
Supported
OPERATING TEMPERATURE
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE
“40° to +70°C (“40° to 158°F)
HUMIDITY
10% to 90%, RHL non“condensing
STANDARD COMPLIANCE
HDCP, HDMI
SAFETY REGULATORY COMPLIANCE
CE, FCC
ENVIRONMENTAL REGULATORY COMPLIANCE
Complies with appropriate requirements of RoHs and WEEE
PRODUCT DIMENSIONS
39.50cm x 18.00cm x 2.00cm (15.55" x 7.09" x 0.79" ) W, D, H
PRODUCT WEIGHT
0.7kg (1.5lbs) approx.
SHIPPING DIMENSIONS
47.70cm x 23.50cm x 4.80cm (18.78" x 9.25" x 1.89" ) W, D, H
SHIPPING WEIGHT
1.0kg (2.1lbs) approx.
FLOW2000 Kit Tx+2Rx
KUWI 5.1-5.9GHz Wireless Technology
DFS Comply
3GSDI & HDMI, with 3GSDI loop out
2000ft/600m (Line-of-Sight) distance
Strong Wall-Cross Performance
2-ch SDI/HDMI audio transmission
OLED info and channel switching
Support 3-4 pairs working in one location
Multicast - 1 transmitter to Max 4 receivers
Wireless protocol & content double encryption
Reclock and accurate color reproduction
S-4612 is a mini converter for DVI to SDI conversion,(DVI-D, 18+1 connector), which can be widely used for DVI video source to deliver and broadcast, support up to 1080p 50/60 format DVI to convert to SDI.
S-4612 is heavy duty housing designed, protecting the BNC connectors well, and supplied various screw threads in the bottom, for convenient installation.
FEATURES
Portable DVI to 3G/HD/SD-SDI Converter
1 DVI input, 1 analog audio input, 2 SDI output
Embed Analog audio into SDI output
Power/input/output status indicator
Pole-tap 6-18V DC power input
Heavy duty aluminium housing
Bottom screw threads for installing
###
Input
DVI-D —1
DVI input
3.5mm—1
Analog audio input
Output
BNC —2
Converted 3G/HD/SD-SDI output
Video Format
SDI
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
DVI
1080p (60/ 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
480i / 576i
Audio
48KHz Sync
General
Power
¤3W
Working Voltage
DC 6-18V
Working Environment
Temperature: 0°C-+70°C, Humidity:10%-90%
Dimensions
98—84—29 mm
Net weight
207g
S-4611 is a mini converter for SDI to DVI conversion,(DVI-D, 18+1 connector), which can be widely
used to display up to 3Gb/s broadcast SDI video on DVI monitor, televisions, LED board or projectors.
S-4611 is heavy duty housing designed, protecting the BNC connectors well, and supplied various
screw threads in the bottom, for convenient installation.
FEATURES
Portable 3G/HD/SD-SDI to DVI Converter
1 SDI input, 1 DVI output, and 1 SDI loop
SDI audio output via 3.5mm socket
Power/input/output status indicator
Pole-tap 6-18V DC power input
Heavy duty aluminium housing
Bottom screw threads for installing
###
Input
BNC —1
3G/HD/SD-SDI input
Output
BNC —1
3G/HD/SD-SDI loop output
DVI-D —1
Converted DVI output
3.5mm —1
SDI audio output
Video Format
SDI
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
DVI
1080p (60/ 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
480i / 576i
Audio
48KHz Sync
General
Power
¤3W
Working Voltage
DC 6-18V
Working Environment
Temperature: 0°C-+70°C, Humidity:10%-90%
Dimensions
98—84—29 mm
Net weight
209g
S-4610 is a portable Audio to SDI mini converter, supports 2-ch digital audio or analog audio to be embedded to the first 8 audio positions of SDI signal, up to 3Gb/s SDI.
S-4610 is heavy duty housing design, protecting the BNC connectors well, and supplied various screw
threads in the bottom, for convenient installing.
FEATURES
Portable Audio to SDI Converter
3G/HD/SD-SDI supported
Embed audio to any 2 channels of SDI first 8-ch positions
AES/EBU audio input and embed
6.35mm balanced audio input and embed
2x SDI output with new embedded audio
Power/input/output status indicator
Pole-tap 6-18V DC power input
Heavy duty aluminium housing
Bottom screw threads for installing
###
Input
BNC —1
3G/HD/SD-SDI input —1
BNC —1
AES/EBU digital audio input —1
6.35mm —2
Analog audio (balanced) input —2
Output
BNC —2
3G/HD/SD-SDI embedded output —2
Video Formats
SDI
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
Audio Formats
Digital audio
Type
AES/EBU
Input level
5Vp-p
Sample frequency
48KHz
Analog audio
Max input level
+24dbu
Bandwidth
20Hz-20KHz
General
Power consumption
¤3W
Working voltage
DC 6-18V
Working environment
Temperature: 0°C-+50°C, Humidity: 10%-90%
Dimension
98—84—29 mm
Net weight
235g
The S-4609 is a portable SDI to Audio mini converter, to de-embed any 2 channels audio from first 8-ch of SDI, supports up to 3Gb/s SDI.The S-4609 is heavy duty housing design, protecting the BNC connectors well, and supplied various screw threads in the bottom, for convenient installing.
FEATURES
Portable SDI to Audio De-embedder
3G/HD/SD-SDI supported
De-embed any 2-ch from first 8-ch audio
Output AES/EBU audio
Output 6.35mm balanced audio
Provide 2x SDI loop output
Power/input/output status indicator
Pole-tap 6-18V DC power input
Heavy duty aluminium housing
Bottom screw threads for installing
###
Input
BNC —1
3G/HD/SD-SDI input —1
Output
BNC —2
3G/HD/SD-SDI loop output —2
BNC —1
AES/EBU digital audio output —1
6.35mm —2
Analog audio (balanced) output —2
Video Formats
SDI
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
Audio Formats
Digital audio
Type
AES/EBU
Output level
5Vp-p
Sample frequency
48KHz
Analog audio
Max output level
+24dbu
Bandwidth
20Hz-20KHz
General
Power
¤3W
Working Voltage
DC 6-18V
Working Environment
Temperature: 0°C-+50°C, Humidity:10%-90%
Dimensions
98—84—29 mm
Net weight
235g
The S-4607 is a portable full-duplex bi-directional Optical fiber and 3G/HD/SD-SDI converter. It can convert SDI input to OPTICAL output, and convert OPTICAL input to SDI output. The single-mode fiber ensures max 20km reliable transmission, and support hot swap of optical module. The S-4607 is heavy duty housing design, protecting the BNC connectors well, and supplied various screw threads in the bottom, for convenient installing.
FEATURES
Portable Optical Fiber Converter
Bi-directional Optical Fiber to SDI and SDI to Optical Fiber
Single mode Optical Fiber, LC connector
Max 20km reliable transmission
Support hot swap of the optical module
Power / SDI input status indicator
Pole-tap 6-18V DC power input
Heavy duty aluminium housing
Bottom screw threads for installing
###
Input
BNC—1
3G/HD/SD-SDI input
LC —1
Optical fiber input
Output
BNC—1
3G/HD/SD-SDI loop output
LC —1
Converted Optical fiber output
BNC—2
Converted 3G/HD/SD-SDI output
Video Format
SDI
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
Optical Fiber
SMPTE 297-2006
Input: 1260-1580nm wavelength
Output: 1310nm wavelength
General
Power
¤4W
Working Voltage
DC 6-18V
Working Environment
Temperature: 0°C-+70°C, Humidity:10%-90%
Dimensions
98—84—29 mm
Net weight
250g
The S-4606 is a portable Optical fiber to 3G/HD/SD-SDI converter. The single-mode fiber ensures max 20 km reliable transmission, and support hot swap of optical module. The S-4606 is heavy duty housing design, protecting the BNC connectors well, and supplied various screw threads in the bottom, for convenient installing.
FEATURES
Portable Optical Fiber to 3G/HD/SD-SDI Converter
1 Fiber input, 2 SDI output
Single mode Optical Fiber, LC connector
Max 20km reliable transmission
Support hot swap of the optical module
Power / SDI input status indicator
Pole-tap 6-18V DC power input
Heavy duty aluminium housing
Bottom screw threads for installing
###
Input
LC —1
Optical fiber input
Output
BNC—2
Converted 3G/HD/SD-SDI output
Video Format
SDI
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
Optical Fiber
SMPTE 297-2006
1260-1580nm wavelength
General
Power
¤3W
Working Voltage
DC 6-18V
Working Environment
Temperature: 0°C-+70°C, Humidity:10%-90%
Dimensions
98—84—29 mm
Net weight
220g
The S-4605 is a portable 3G/HD/SD-SDI to optical fiber converter. The single-mode fiber ensures max 20km reliable transmission, and support hot swap of optical module.
The S-4605 is heavy duty housing design, protecting the BNC connectors well, and supplied various screw threads in the bottom, for convenient installing.
FEATURES
Portable 3G/HD/SD-SDI to Optical Fiber Converter
1 SDI input, 1 Fiber output, and 1 SDI loop output
Single mode Optical Fiber, LC connector
Max 20km reliable transmission
Support hot swap of the optical module
Power / SDI input status indicator
Pole-tap 6-18V DC power input
Heavy duty aluminium housing
Bottom screw threads for installing
###
Input
BNC—1
3G/HD/SD-SDI input
Output
BNC —1
3G/HD/SD-SDI loop output
LC —1
Converted Optical fiber output
Video Format
SDI
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
Optical Fiber
SMPTE 297-2006
1310nm wavelength
General
Power
¤3W
Working Voltage
DC 6-18V
Working Environment
Temperature: 0°C-+70°C, Humidity:10%-90%
Dimensions
98—84—29 mm
Net weight
220g
The S-4601 Converter from SWIT is an HDMI to 3G/HD/SD-SDI converter. It supports HDMI audio embedded into SDI output and analog audio (3.5mm socket) input, embedded into SDI output. Protecting the BNC connectors, the S-4601 is housed in a heavy-duty housing. It features various screw threads at the bottom for convenient installation. The unit ships with a power supply.
Note: Does not support HDCP.
FEATURES
Portable HDMI to 3G/HD/SD-SDI converter
One HDMI input and two SDI outputs
One analog audio input via 3.5mm earphone socket
Embed HDMI audio to SDI output
Embed analog audio (3.5mm) to SDI output
Power/input/output status indicator
Heavy-duty housing
Bottom screw threads for convinient installation
SPECIFICATIONS
Input
HDMI —1
HDMI input
3.5mm—1
Analog audio input
Output
BNC —2
Converted 3G/HD/SD-SDI output
Video Format
SDI
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
HDMI
1080p (60/ 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
480i / 576i
Audio
48KHz Sync
General
Power
¤3W
Working Voltage
DC 6-18V
Working Environment
Temperature: 0°C-+70°C, Humidity:10%-90%
Dimensions
98—84—29 mm
Net weight
210g
The S-4604 is a portable 3G/HD/SD-SDI distributor. It supports 1 SDI input, and 4 SDI output, with embeddedaudio. There're Power/Input/Output status indicators to check the connection conditions and availability of distribution.
S-4604 is heavy duty housing design, protecting the BNC connectors well, and supplied various screw threadsin the bottom, for convenient installing, and future accessories (battery mount, etc).
FEATURES
Portable 3G/HD/SD-SDI 1 to 4 distributor
1 SDI input, 4 SDI output
SDI re-clocking and amplifier
Power/input/output status indicator
Pole-tap 6-18V DC power input
Heavy duty aluminium housing
Bottom screw threads for installing
###
Input
BNC—1
3G/HD/SD-SDI input
Output
BNC —4
3G/HD/SD-SDI output
Video Format
SDI
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
General
Power
¤2W
Working Voltage
DC 6-18V
Working Environment
Temperature: 0°C-+70°C, Humidity:10%-90%
Dimensions
105—84—29 mm
Net weight
240g
The S-4600 Converter from SWIT is a portable 3G-SDI to HDMI converter. It converts the 3G-SDI signal, with its embedded audio, to HDMI output. The S-4600 supports 3G-SDI loop through output and SDI embedded audio via a 3.5mm analog audio output. The BNC connectors are protected by the S-4600's heavy-duty housing. It features various screw threads at the bottom for convenient installation. The unit ships with a power supply.
FEATURES
Portable 3G/HD/SD-SDI to HDMI converter
Embed SDI audio to HDMI output
One 3G-SDI input, one HDMI output, and one 3G-SDI loop through output
One analog audio output via 3.5mm socket
Power/input/output status indicators
Heavy-duty housing
Bottom screw threads for convenient installation
###
Input
BNC —1
3G/HD/SD-SDI input
Output
BNC —1
3G/HD/SD-SDI loop output
HDMI —1
Converted HDMI output
3.5mm —1
SDI audio output
Video Format
SDI
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
HDMI
1080p (60/ 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
480i / 576i
Audio
48KHz Sync
General
Power
¤3W
Working Voltage
DC 6-18V
Working Environment
Temperature: 0°C-+70°C, Humidity:10%-90%
Dimensions
98—84—29 mm
Net weight
200g
FLOW 2 is a powerful product, it combines frequency conversion and optical transceiver in one tiny device. It is the upgraded version of FLOW 4K
With an intelligent scroll wheel. Widely used in various business scenarios such as broadcast program, variety show recording, large events, and video conferences, providing users with excellent AV experiences.
Support of 35 types SMPTE formats
Flow2 provides up and down conversion in 35 formats (from HD to UHD), the maximum 3840x2160p60. Supports up to 12G-SDI/HDMI 4K60 inter-conversion and output. The user can choose the output format with just a click.
Optical transceiver, Ultra long distance transmission
Provide a 12G SDI optical transceiver interface, simultaneously transmit and receive 3G/6G/12G SDI and HDMI 4K videos, support maximum 20km transmission; The web UI is equipped with an optical transceiver switch, allowing users to freely choose HDMI optical transceiver or SDI optical transceiver in the web UI.
An intelligent scroll wheel
With an intelligent scroll wheel, it's so convenient to operate menu and manage the settings, no need to enter the web UI.
The scroll wheel can realize the function below:
SDI/HDMI input priority setting.
Optical transceiver function transmitting and receiving settings.
Free selection of output resolution format.
Flexible deployment, convenient and practical
While the optical transceiver works, it is also a SDI/HDMI bidirectional converter; One machine for multiple purposes, reducing system cost, fast response, flexibility and convenience.
Broadcast level, Reliable and stable
Support 12G-SDI/HDMI 2.0 and SMPTE/ITU international broadcast standard formats, compatible with multiple sampling formats(444,422,420), accurate and fast signal recognition.
Compatibility and stability
Support SMPTE video source, compatible with a variety of equipment. Open to most software and browsers, truly plug and play. Flow 2 meets industrial standard, which ensures it works durably and reliably.
Aviation standard
Aviation aluminum integrated design and milling, ultra-thin process, aviation process manufacturing.
Broadcast quality
Broadcast grade international standard formats and specifications, accurate and rapid signal recognition, the program runs like a rock, not affected by the environment.
Multiple applications
It is widely used in many occasions, such as conference and stage live, remote connection, education live broadcast, and gives full play to its advantages in various fields.
Flexible deployment
One machine multi-purpose, reduce the system cost, to be able to respond quickly, flexible, convenient.
###
Video format
SDI video format
1.5G/3G-SDI HD video format
720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 2K DCI 23.98p, 2K DCI 24p, 2K DCI 25p, 1080p50, 1080p59.94, 1080p60
6G/12G-SDI/Ultra HD /4K video format
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p50, 2160p59.94, 2160p60
SDI specification
SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M, SMPTE 2081-1, SMPTE 2081-10, SMPTE 2082-1 and SMPTE 2082-10
HDMI video format
HD video format
720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 2K DCI 23.98p, 2K DCI 24p, 2K DCI 25p, 1080p50, 1080p59.94, 1080p60
4K video format
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p50, 2160p59.94, 2160p60
SDI video sampling
4:2:2 and 4:4:4
SDI audio sampling rate
TV standard 48kHz
SDI color accuracy
4:2:2 and 4:4:4
SDI color space
REC 709 BT2020
HDMI color space
REC 709 BT2020
HDMI color accuracy
YUV 4:2:2 and RGB 4:4:4
Interface
SDI video input
1 x 1.5G/3G/6G/12G-SDI, adaptive input, automatic switching
SDI video output
1 x 1.5G/3G/6G/12G-SDI, adaptive output, automatic switching
HDMI video input
1 x HDMI 2.0 Type A interface supports up to HDMI 4K60p input, backward compatible
HDMI video output
1 x HDMI 2.0 Type A interface supports maximum HDMI 4K60p output, backward compatible
Optical fiber input and output
1 x SMPTE optical fiber SFP socket, used to connect different types of Gigabit/10 Gigabit/12G-SDI optical fiber modules
RJ45 Gigabit Ethernet port
1 x RJ45 Gigabit Ethernet interface
LINE IN audio input port
1 x LINE IN 3.5mm audio input port for external analog audio embedding
MIC input and output port
1 x Mic 3.5mm audio input and output port
Display
1.3 inch OLED screen
1 x 1.3-inch OLED screen, real-time display of NDI box encoding/decoding status, input/output format and IP and other information, clear at a glance, easy to operate.
Specifications
size
125mm x 115mm x 24mm
weight
365g
material
all aviation aluminum milling
Power supply
Two power supply modes
5-18V DC power input and POE
Power consumption
MAX 12W
Environmental requirements
Operating temperature
5°C to 40°C
Storage temperature
-20° to 60° C (-4° to 140° F)
Relative humidity
0% to 90% non-condensing
###
Science Image Flow 2
12V Universal Power Supply
The compact SCIENCE IMAGE NDI Mini HD Bidirectional 3G-SDI/HDMI Encoder/Decoder with both 3G-SDI and HDMI 1.4 inputs and outputs can encode or decode full NDI video up to 2160p30 with a small form factor. A large, matte tally light on the side of the device makes it ideal for use in live production environments. The design of the device features a 1.3" OLED display screen, which shows the unit's working status and parameters as well as input and output in real time.
The NDI Mini HD has a USB Type-C port for integration of PTZ cameras into the system. PTZ cameras can then receive commands over NDI, even if the camera itself is not NDI compatible. A 3.5mm stereo audio line-level input and headphone output are integrated into the back of the device for audio monitoring. Power can be received by the device either through the Ethernet input, the PTZ USB port, or the DC connection with the included 12 VDC power supply.
Features
Large, matte tally light: green for preview, red for program
OLED screen displays real-time status of encoding/decoding, input/output format, IP, and other information
Integrated cold shoe mount
Built-in Linux software
3.5mm audio input and output can be used with NDI intercom with separately available Laudo software
Supported Software and Operating Systems
Science Image Laudo application control software
Supports Windows 8.1 and 10 operating systems
Supports Mac 10.14 Mojave, Mac 10.15 Catalina or higher
Supports Internet Explorer, Microsoft Edge, Firefox, Chrome, Safari, Opera, and other browsers
###
Inputs/Outputs
1 x 1/8" / 3.5 mm TRRS A/V Female
Video Inputs
1 x BNC (3G-SDI) Female1 x HDMI (HDMI 1.4) Female
Audio Inputs
1 x 1/8" / 3.5 mm TRS Stereo Analog Female
Video Outputs
1 x BNC (3G-SDI) Female
Audio Outputs
1 x 1/8" / 3.5 mm TRRS Headphone/Microphone Stereo Analog Female
Other I/O
1 x USB-A PTZ Input1 x RJ45 PoE Input
Expansion Slots
No
Input Video Format
SDI (4:4:4 RGB, YUV)1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1080i 50/59.94/60 fps 1080PsF 23.98/24/25/29.97/30 fps 720p 50/59.94/60 fps 576i / 625 lines 50 fps 480i / 525 lines 59.94 fps
Input Audio Format
Analog: 48 kHz / 24-Bit
Output Video Format
SDI (4:4:4 RGB, YUV)1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1080i 50/59.94/60 fps 1080PsF 23.98/24/25/29.97/30 fps 720p 50/59.94/60 fps 576i / 625 lines 50 fps 480i / 525 lines 59.94 fps
Output Audio Format
Analog: 48 kHz / 24-Bit
Embedded Audio
SDI
Standards
Video Standard Compliance
SMPTE 259M/292M/296M/372M/424M/425M/ST-2081-1/ST-2081-10/ST-2082-1/ST-2082-10
HDCP Support
No
EDID Support
No
HDR Compatibility
No
Hardware
Display Size
1.3"
Tally Light
Yes
OS Compatibility
Windows 8.1 Windows 10 macOS 10.14 macOS 10.15 or Later *As of February, 2022: Check with manufacturer for the most up-to-date compatibility
Power
Power I/O
1 x Barrel (5 to 18 VDC) Input
PoE Support
PoE+ 802.3at
Power Consumption
Device: 10 W
Environmental
Operating Temperature
41 to 104°F / 5 to 40°C
Storage Temperature
-4 to 140°F / -20 to 60°C
Operating Humidity
0 to 90% (Non-Condensing)
General
Dimensions
4.9 x 3.7 x 0.9" / 125 x 95 x 22 mm
Weight
9.5 oz / 270 g
###
SCIENCE IMAGE NDI Mini HD
12 VDC Power Supply