De Swit OMNI-99S V-lock 99Wh batterij biedt verschillende interfaces, waaronder een 65W USB-C, een standaard USB-A (5V), een 8,4V DC en een 14,4V D-tap. Met deze verschillende interfaces kan je accessoires zoals monitoren of follow focus direct op de camera van stroom voorzien, of ze met dummybatterijen aan de cages van de camera bevestigen, zodat je een kleine energiecentrale voor je camera creëert. De batterijaansluiting, D-aansluiting en USB-C zijn bidirectionele interfaces en er kunnen verschillende methoden worden gebruikt om de batterij op te laden.
Het apparaat behoudt het opgegeven vermogen tot de laatste seconde voordat de batterij 0% bereikt. Bovendien garandeert OMNI het opgegeven vermogen voor uw apparatuur gedurende de volledige levensduur van de batterijen. De OMNI-99S is ontworpen om extreme temperaturen van -20°C tot +50°C te weerstaan en betrouwbare prestaties te garanderen in uiteenlopende omgevingsomstandigheden, waardoor ze zelfs geschikt zijn voor buitenopnames zoals poolgebieden en woestijnen, en bestand zijn tegen een val van meer dan 1,2 meter.
###
Battery plate
V-mount
Nominal voltage
14.4V
Capacity
99Wh, 6.9Ah
Power IN&OUT
Electrodes: 150W 12A out, 16.8V 3.4A in
D-tap: 150W 12A out, 16.8V 3.4A in
Barrel DC: 5.5/2.1mm, Reg. 8.4V 3A out
USB-A: 10W, 5V/2A out
USB-C out: 65W, 5V/9V/12V/15V/20V(Max)=3.25A
BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP
USB-C charging in:
USB-C to C Charger Request - PD2.0/3.0, Power 48W
USB-A to C Charger Request - 5V only
Dimension
102—74—52mm
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C
Net weight
Net 553g; With package 691.5g
###
1x Swit OMNI-99S V-lock 99Wh batterij
De Swit OMNI-50S V-lock 50Wh batterij met hoge capaciteit biedt verschillende interfaces, waaronder een 65W USB-C, een standaard USB-A (5V), een 8,4V DC en een 14,4V D-tap. Met deze verschillende interfaces kunnen gebruikers accessoires zoals monitoren of follow focus direct op de camera van stroom voorzien, of ze met behulp van dummybatterijen aan de camera cages bevestigen, waardoor je in feite een kleine energiecentrale voor je camera creëert. De batterijaansluiting, D-aansluiting en USB-C zijn bidirectionele interfaces en er kunnen verschillende methoden worden gebruikt om de batterij op te laden.
Het apparaat handhaaft het opgegeven vermogen tot de laatste seconde voordat de batterij 0% bereikt. Bovendien garandeert OMNI het opgegeven vermogen voor de apparatuur gedurende de volledige levensduur van de batterij. De batterij is bestand tegen extreme temperaturen van -20°C tot +50°C. OMNI batterijen garanderen betrouwbare prestaties in verschillende omgevingsomstandigheden, waardoor ze zelfs geschikt zijn voor buitenopnamen, zoals poolgebieden en woestijnen, en bestand zijn tegen een val van meer dan 1,2 meter.
###
Battery plate
V-mount
Nominal voltage
14.4V
Capacity
50Wh, 3.45Ah
Power IN&OUT
Electrodes: 100W 8A out, 16.8V 1.7A in
D-tap: 100W 8A out, 16.8V 1.7A in
Barrel DC: 5.5/2.1mm, Reg. 8.4V 3A out
USB-A: 10W, 5V/2A out
USB-C out: 65W, 5V/9V/12V/15V/20V(Max)=3.25A
BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP
USB-C charging in:
USB-C to C Charger Request - PD2.0/3.0, Power 48W
USB-A to C Charger Request - 5V only
Dimension
102—74—33.5mm
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C
Net weight
Net 338g; With package 450.5g
###
1x Swit OMNI-50S
Ultra-draagbare lader met één kanaal
3A, voor batterijen met D-tap aansluiting
De PC-U130B bestaat uit een AC-DC voedingsmodule en een D-tap DC kabel om aan te sluiten op de D-tap aansluiting van batterijen. De enkelkanaals lader biedt DC 14-16.8V, 3A snellaadvermogen.LED Oplaad Indicator
De PC-U130B heeft een LED laadindicator. Deze is rood tijdens het opladen en wordt groen wanneer het opladen klaar is.
###
Oplader accu aansluitingen
1
Accu aansluiting
D-Tap
Ingangsvermogen
AC100V-240V 50/60Hz
Uitgangsvermogen
DC 14V-16.8V, 3A
Gewicht (gr.)
810
Afmetingen
110 — 50 — 32 mm
CIMO-98S 98Wh USB-C Slim Cine V-mount Battery
Functies
Slank formaat V-mount batterij
Vliegvriendelijke capaciteit van 98Wh/6,8Ah
' 150W/12A constante hoge belasting, 200W piek
' 2—D-tap uitgang & opladen ingang
1x Vat DC Gereguleerde 8,4V uitgang
1x USB-A 5V/9V 2A 18W uitgang
1x SB-C 65W uitgang & 45W ingang
' 4-LED indicator voor resterende stroom
Achterste LED zaklamp voor donkere omgeving
Sterke behuizing 1,2 m valbestendig
Meerdere circuitbeveiligingen
CINE V-Mount batterij
De CIMO serie cine klasse V-mount batterijen zijn voorzien van een hoog vermogen, 2— D-tap, 65W USB-C, OLED power info display, batterijlevensduur inspectie en 1,2m drop-off proof voor professionele cinematografen.
14,4V, 98Wh slank formaat
CIMO-98S bestaat uit 8 ternaire lithiumcellen, 14,4V nominale spanning, 98Wh, 6,8Ah vliegvriendelijke capaciteit.
De ternaire lithiumcellen bieden een hogere energiedichtheid, bereiken een hogere capaciteit met een kleiner formaat en uitstekende prestaties bij lage temperaturen, waardoor ze stroom kunnen leveren in een koude omgeving van -20°C.
150W constante / 200W piekvermogen voor hoge belasting
De CIMO-98S levert een hoge belasting van minimaal 150W/12A, zelfs bij 1% capaciteit (piekbelasting tot 200W), om krachtige Cine-camera's en on-camera apparaten aan te drijven. De hoge belasting cellen zal ook zorgen voor levensduur van de batterij in vergelijking met normale belasting batterijen als lange tijd volledige belasting output.
2—D-tap, USB-A & USB-C
CIMO-98S biedt
2x D-tap 150W in totaal;
1x USB-A 5V/9V 2A uit;
1x USB-C 45 W ingang en 65 W uitgang voor verschillende apparaten op de camera.
USB-C 65W uitgang
De USB-C poort van de CIMO-98S levert 5V/9V/12V/15V 3A, 20V(Max) 3.25A, 65W hoog vermogen voor laptops en verschillende slimme apparaten, met BC1.2, QC2.0/3.0, FCP, SCP, PD2.0/3.0 universeel compatibele protocollen.
LED zaklamp
Je kunt twee keer op de Power Check-knop drukken om de LED-zaklamp aan de achterkant van de batterij in te schakelen, om je te helpen de V-mount plaat te vinden in een donkere productieomgeving.
Druk nogmaals tweemaal op de Power Check-knop om het licht uit te schakelen. Na 60 seconden wordt het automatisch uitgeschakeld.
Bestand tegen een val van 1,2 meter
De batterijen uit de CIMO-serie hebben een dubbele behuizing en zijn bestand tegen een val van 1,2 meter onder elke hoek. Ze zijn sterk en betrouwbaar voor filmmakers.
Battery plate
V-mount
Nominal voltage
14.4V
Capacity
98Wh, 6.8Ah
Power Load
150W, 12A constant; 200W peak
Power IN&OUT
Electrodes: 150W 12A out, 16.8V 4A(Max) in
D-tap—2: (Plug 1—D-tap) 150W 12A out
(Plug 2—D-tap) 150W 12A out in total
Charging through D-tap: 16.8V 4A(Max) in
USB-A: 5V/9V(Max) 2A out, 18W
USB-C out: 65W, 5V/9V/12V/15V/20V(Max)=3.25A
BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP
USB-C charging in:
USB-C to C Charger Request - PD2.0/3.0, Power 45W
USB-A to C Charger Request - 5V only
Dimension
144—100—35mm
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C
Net weight
Net 642g; With package 677g
CIMO-200S 196Wh USB-C OLED info Cine V-mount Battery
Cine-stijl V-mount batterij
196Wh/13,6Ah grote capaciteit
' 200W/16A constante hoge belasting, 270W piek
2—D-tap uitgang & oplaadingang
1x USB-A 5V/9V 2A 18W uitgang
1x USB-C 65 W uitgang & 60 W ingang
OLED-scherm voor resterende looptijd
Achterste LED zaklamp voor donkere omgeving
Sterke behuizing 1,2 m valbestendig
Meerdere circuitbeveiligingen
CINE V-Mount batterij
De CIMO serie cine klasse V-mount batterijen zijn voorzien van een hoog vermogen, 2— D-tap, 65W USB-C, OLED power info display, batterijlevensduur inspectie en 1,2m drop-off proof voor professionele cinematografen.
14,4V, 196Wh capaciteit
CIMO-200S bestaat uit 16 ternaire lithiumcellen, 14,4V nominale spanning, 196Wh, 13,6Ah grote capaciteit.
De ternaire lithiumcellen bieden een hogere energiedichtheid, bereiken een hogere capaciteit met een kleiner formaat en uitstekende prestaties bij lage temperaturen, waardoor ze stroom kunnen leveren in een koude omgeving van -20°C.
200 W constante / 270 W piekvermogen hoge belasting
De CIMO-200S levert een hoge belasting van minimaal 200 W/16 A, zelfs bij 1% capaciteit (piekbelasting tot 270 W), om krachtige Cine-camera's en on-camera apparaten aan te drijven. De cellen met hoge belasting zorgen ook voor een langere levensduur van de batterij in vergelijking met batterijen met normale belasting als de volledige belasting lange tijd wordt uitgevoerd.
100W 6A snel opladen
CIMO-200S ondersteunt 100W/6A snelladen door SWIT PC-P461S / MATRIX-S8 / S-3812S laders, twee keer de laadsnelheid, en de 6A snelladen heeft geen invloed op de levensduur van de ternaire lithiumcellen.
De 196Wh batterij kan worden opgeladen van 0 tot 80% na 1,7 uur, en volledig opgeladen binnen 2,75 uur.
OLED-scherm voor vermogensinformatie / gezondheidsniveau
De CIMO-200S accu heeft een OLED-scherm dat de batterijstatus en stroominformatie weergeeft, waaronder het stroompercentage, de resterende gebruikstijd en druk lang op de stroomcontroleknop om de cyclustijden van de batterij en het gezondheidsniveau voor batterijbeheer weer te geven.
2—D-tap, USB-A & USB-C
CIMO-200S biedt
2x D-tap 200W in totaal;
1x USB-A 5V/9V 2A uit;
1x USB-C 60 W ingang en 65 W uitgang voor verschillende apparaten op de camera.
USB-C 65W uitgang
De USB-C poort van de CIMO-200S levert 5V/9V/12V/15V 3A, 20V(Max) 3.25A, 65W hoog vermogen voor laptops en verschillende slimme apparaten, met BC1.2, QC2.0/3.0, FCP, SCP, PD2.0/3.0 universeel compatibele protocollen.
USB-C 60W Oplaadingang
De batterij kan ook worden opgeladen met een USB-C oplader met PD2.0/3.0 60W vermogen, volledig opgeladen binnen 4,5 uur.
* Let op: USB-C laders met een laag vermogen van minder dan 60 W kunnen deze batterij niet opladen.
LED zaklamp
Je kunt twee keer op de Power Check-knop drukken om de LED-zaklamp aan de achterkant van de batterij in te schakelen, om je te helpen de V-mount plaat te vinden in een donkere productieomgeving.
Druk nogmaals tweemaal op de Power Check-knop om het licht uit te schakelen. Na 60 seconden wordt het automatisch uitgeschakeld.
Bestand tegen een val van 1,2 meter
De batterijen uit de CIMO-serie hebben een dubbele behuizing en zijn bestand tegen een val van 1,2 meter onder elke hoek. Ze zijn sterk en betrouwbaar voor filmmakers.
CIMO-290S - 290Wh USB-C OLED info Cine V-mount Battery
Kenmerken
- Cine-stijl V-mount batterij
- 290Wh/20.1Ah grote capaciteit
- 250W/20A constante hoge belasting, 335W piek
- 2—D-tap uitgang & oplaadingang
- 1x USB-A 5V/9V 2A 18W uitgang
- 1x USB-C 65 W uitgang & 60 W ingang
- OLED-scherm voor resterende looptijd
- LED-zaklamp achteraan voor donkere omgeving
- Sterke behuizing 1,2 m valbestendig
- Meerdere circuitbeveiligingen BMS
CINE V-Mount batterij
De CIMO serie cine klasse V-mount batterijen zijn voorzien van een hoog vermogen, 2— D-tap, 65W USB-C, OLED power info display, batterijlevensduur inspectie en 1,2m drop-off proof voor professionele cinematografen.
14,4V, 290Wh capaciteit
CIMO-290S bestaat uit 24 ternaire lithiumcellen, 14,4V nominale spanning, 290Wh, 20,1Ah grote capaciteit.
De ternaire lithiumcellen bieden een hogere energiedichtheid, bereiken een hogere capaciteit met een kleiner formaat en uitstekende prestaties bij lage temperaturen, waardoor ze stroom kunnen leveren in een koude omgeving van -20°C.
100W 6A snel opladen
CIMO-290S ondersteunt 100W/6A snelladen door SWIT PC-P461S / MATRIX-S8 / S-3812S laders, twee keer de laadsnelheid, en de 6A snelladen heeft geen invloed op de levensduur van ternaire lithiumcellen.
De 290Wh batterij kan worden opgeladen van 0 tot 80% na 2,5 uur, en volledig opgeladen binnen 3,8 uur.
OLED-scherm voor vermogensinformatie/gezondheidsniveau
De CIMO-290S batterij heeft een OLED-scherm dat de batterijstatus en stroominformatie weergeeft, waaronder het stroompercentage, de resterende gebruikstijd en druk lang op de stroomcontroleknop om de cyclustijden van de batterij en het gezondheidsniveau voor batterijbeheer weer te geven.
2—D-tap, USB-A & USB-C
CIMO-290S biedt
2x D-tap 250W in totaal;
1x USB-A 5V/9V 2A uit;
1x USB-C 60 W ingang en 65 W uitgang
voor verschillende apparaten op de camera.
USB-C 65W uitgang
De USB-C poort van CIMO-290S levert 5V/9V/12V/15V 3A, 20V(Max) 3.25A, 65W hoog vermogen voor laptops en verschillende slimme apparaten, met BC1.2, QC2.0/3.0, FCP, SCP, PD2.0/3.0 universeel compatibele protocollen.
USB-C 60W oplaadingang
De batterij kan ook worden opgeladen met een USB-C oplader met PD2.0/3.0 60W vermogen, volledig opgeladen binnen 6,6 uur.
* Let op: USB-C laders met een laag vermogen van minder dan 60 W kunnen deze batterij niet opladen.
LED zaklamp
Je kunt twee keer op de Power Check-knop drukken om de LED-zaklamp aan de achterkant van de batterij in te schakelen, om je te helpen de V-mount plaat te vinden in een donkere productieomgeving.
Druk nogmaals tweemaal op de Power Check-knop om het licht uit te schakelen. Na 60 seconden wordt het automatisch uitgeschakeld.
Bestand tegen een val van 1,2 meter
De batterijen uit de CIMO-serie hebben een dubbele behuizing en zijn bestand tegen een val van 1,2 meter onder elke hoek. Ze zijn sterk en betrouwbaar voor filmmakers.
CIMO-160S 160Wh USB-C OLED info Cine V-mount Battery
Functies
- Cine-stijl V-mount batterij
- 160Wh/11.1Ah vliegvriendelijke capaciteit
- 200W/16A constante hoge belasting, 270W piek
- 2—D-tap uitgang & oplaadingang
- 1x USB-A 5V/9V 2A 18W uitgang
- 1x USB-C 65W uitgang & 60W ingang
- OLED-scherm voor resterende looptijd
- LED-zaklamp achteraan voor donkere omgeving
- Sterke behuizing 1,2 m valbestendig
- Meerdere circuitbeveiligingen BMS
CINE V-Mount batterij
De CIMO serie cine klasse V-mount batterijen zijn voorzien van een hoge stroombelasting, 2— D-tap, 65W USB-C, OLED power info display, batterijlevensduur inspectie en 1,2m drop-off proof voor professionele cinematografen.
14,4V, 160Wh Capaciteit
CIMO-160S bestaat uit 16 ternaire lithiumcellen, 14,4V nominale spanning, 160Wh, 11,1Ah grote capaciteit.
De ternaire lithiumcellen bieden een hogere energiedichtheid, bereiken een hogere capaciteit met een kleiner formaat en uitstekende prestaties bij lage temperaturen, waardoor ze stroom kunnen leveren in een koude omgeving van -20°C.
200W constante / 270W piekvermogen hoge belasting
De CIMO-160S levert een hoge belasting van minimaal 200 W/16 A, zelfs bij 1% capaciteit (piekbelasting tot 270 W), om krachtige Cine-camera's en on-camera apparaten aan te drijven. De cellen met hoge belasting zorgen ook voor een langere levensduur van de batterij in vergelijking met batterijen met normale belasting als de volledige belasting lange tijd wordt uitgevoerd.
100W 6A snel opladen
CIMO-160S ondersteunt 100W/6A snelladen door SWIT PC-P461S / MATRIX-S8 / S-3812S laders, twee keer de laadsnelheid, en de 6A snelladen heeft geen invloed op de levensduur van ternaire lithiumcellen.
De 160Wh batterij kan worden opgeladen van 0 tot 80% na 1,5 uur, en volledig opgeladen binnen 2,5 uur.
OLED-scherm voor vermogensinformatie / gezondheidsniveau
De CIMO-160S batterij heeft een OLED-scherm dat de batterijstatus en stroominformatie weergeeft, waaronder het stroompercentage, de resterende gebruikstijd en druk lang op de stroomcontroleknop om de cyclustijden van de batterij en het gezondheidsniveau voor batterijbeheer weer te geven.
2—D-tap, USB-A & USB-C
CIMO-160S biedt
2x D-tap 200W in totaal;
1x USB-A 5V/9V 2A uit;
1x USB-C 60 W ingang en 65 W uitgang
voor verschillende apparaten op de camera.
USB-C 65W uitgang
De USB-C poort van de CIMO-160S levert 5V/9V/12V/15V 3A, 20V(Max) 3.25A, 65W hoog vermogen voor laptops en verschillende slimme apparaten, met BC1.2, QC2.0/3.0, FCP, SCP, PD2.0/3.0 universeel compatibele protocollen.
USB-C 60W Charging Input
The battery can also be charged by USB-C charger of PD2.0/3.0 60W power, fully charged within 4 hours.* Please note that<60W low power USB-C chargers are unable to charge this battery.
LED zaklamp
Je kunt twee keer op de Power Check-knop drukken om de LED-zaklamp aan de achterkant van de batterij in te schakelen, om je te helpen de V-mount plaat te vinden in een donkere productieomgeving.
Druk nogmaals tweemaal op de Power Check-knop om het licht uit te schakelen. Na 60 seconden wordt het automatisch uitgeschakeld.
Bestand tegen een val van 1,2 meter
De batterijen uit de CIMO-serie hebben een dubbele behuizing en zijn bestand tegen een val van 1,2 meter onder elke hoek. Ze zijn sterk en betrouwbaar voor filmmakers.
###
Battery plate
V-mount
Nominal voltage
14.4V
Capacity
160Wh, 11.1Ah
Power Load
200W, 16A constant; 270W peak
Power IN&OUT
Electrodes: 200W 16A out, 16.8V 8A(Max) in
D-tap—2: (Plug 1—D-tap) 200W 16A out
(Plug 2—D-tap) 200W 16A out in total
Charging through D-tap: 16.8V 8A(Max) in
USB-A: 5V/9V(Max) 2A out, 18W
USB-C out: 65W, 5V/9V/12V/15V/20V(Max)=3.25A
BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP
USB-C charging in:
USB-C to C Charger Request - PD2.0/3.0, Power 60W
USB-A to C Charger Request - 5V only
Dimension
144—100—51mm
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C
Net weight
Net 1.085kg; With package 1.127kg
Features
Tiny V-mount battery, Pocket fit
146Wh/10.1Ah fly-friendly capacity
150W/12A constant high load
1x D-tap output & charging input
1x USB 5V/2A output
5-step LED power indicator
Power info for both SONY & RED
Wire-Free internal technic
Multiple circuit protections
Pocket V-mount battery
As a new member of PB-M series Pocket V-mount batteries, the PB-M146S provides 146Wh larger capacity to extend run time, and still tiny size for convenient carrying.
146Wh, D-tap and USB
PB-M146S has 14.4V nominal voltage, 146Wh large capacity, and 5-step LED power indicator, built-in D-tap DC output & charging input, and USB-A 5V/2A power out.The constant load is 150W, 12A
Hot-Swap Adaptor
You can use 2x PB-M146S hot-swapable on cameras, by the Hot-swap Adaptor KA-M20S, to get one-by-one hot swap uninterrupted power, and equivalent to a standard size V-mount battery.
50W/3A Fast Charging
PB-M146S can be charged by all standard V-mount chargers and D-tap chargers.The following chargers are recommended:1. S-3822S, Portable 2-ch Simultaneous Charger Charge 2x PB-M146S: Approx. 3hrs 45min2. PC-U130B2, Ultra-Portable Dual D-tap head charger Charge 1x PB-M146S: Approx. 3hrs 45min Charge 2x PB-M146S: Approx. 6 hours
Family Models
The PB-M pocket V-mount series have 45Wh, 98Wh and 146Wh, with the
same output sockets and the same bottom size but different thickness.
Wire-Free Internal Tech
PB-M146S has innovative "Wire-Free internal technic. All the cells, D-tap, USB, power indicator devices are directly soldered onto PCB, no connecting wires, to reduce internal resistance effectively, and make the circuit stable, safe, and reliable.
Battery plate
V-mount
Nominal voltage
14.4V
Capacity
146Wh, 10.1Ah
Power output
In total: 150W
Electrodes: 150W,12A
USB:10W, 5V/2A
D-tap: 100W / 10A
Charging input
16.8V 3A (Max)
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C(Capacity and Max Load may decrease when operating below 0°ï¼
Dimension
100—74—63.7mm
Net weight
Net 0.72kg; With package0.75kg
Features
Pocket fit compact V-mount battery
Support RED V-Raptor install
210Wh/14.6Ah high capacity
200W/16A constant high load
100W/6A ultra fast charging
1x D-tap output & charging input
1x USB-A 5V/2A output
1x USB-C 48W input & 65W output
4-step LED power indicator
Power info for both SONY & RED
Wire-Free internal technic
Multiple circuit protections
The Smallest 210Wh
V-mount Battery
MINO-S210 is a large capacity pocket fit size V-mount battery for cine range cameras, lights and various film gears. It fits RED V-raptor at the compact size and power the camera for at least 3 hours.
Compact Handheld Size
As a 210Wh large capacity battery, the MINO-S210 has 105x79.6x73.8mm compact size, and weights 1.02kg only. You can even carry it out with your pocket.
210Wh, 200W High Load
MINO-S210 consists of 12 high capacity cells, with 210Wh/14.6Ah high capacity, and support at least 200W/16A constant high load output, for high power cine cameras and lights..
D-tap, USB-A and USB-C
The MINO-S210 provides various DC sockets:D-tap x1 - 120W/10A load (Support charging input)USB-A x1 - 5V/2A outputUSB-C x1 - 65W output and 48W charging input
USB-C 48W Charging Input
MINO-S70 battery can be charged by USB-C charger, supports PD 5V/9V/12V/15V/20V(Max) 2.4A, 48W charging input, which means you can fully charge the 210Wh battery within 5 hours.
USB-C 65W Power Output
You can power laptop via USB-C by MINO-S210 battery on the filmset. Supports 5V 3.25A, 9V 3.25A, 12V 3.25A, 15V 3.25A and Max 20V 3.25A, BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP multiple protocols. (For Macbook Air/13, Macbook Pro 13/15/16, Huawei Matebook E/12/X13/XPRO, Thinkpad, HP, ASUS, Dell and almost all laptops with USB-C ports)
Wire-Free Internal Tech
MINO-S210 has innovative "Wire-Free internal technic. All the cells, D-tap, USB-A, USB-C, power indicator devices are directly soldered onto PCB, no connecting wires, to reduce internal resistance effectively, and make the circuit stable, safe, and reliable.
###
Battery plate
V-mount
Nominal voltage
14.4V
Capacity
210Wh, 14.6Ah
Power IN&OUT
Electrodes: 200W 16A out, 16.8V 6A in
D-tap: 120W 10A out, 16.8V 6A in
USB-A: 10W, 5V/2A out
USB-C: Max 65W out, 5V/9V/12V/15V/20V(Max) 3.25A
BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP
Max 48W in, 5V/9V/12V/15V/20V(Max) 2.4A
Dimension
105—79.6—73.8mm (Fit RED Raptor)
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)
Net weight
1.02kg
Features
Tiny V-mount battery, Pocket fit
Support RED V-Raptor install
70Wh/4.9Ah high capacity
100W/8A constant power load
1x D-tap output & charging input
1x USB-A 5V/2A output
1x USB-C 35W input & 65W output
4-step LED power indicator
Power info for both SONY & RED
Wire-Free internal technic
Multiple circuit protections
Tiny Size 70Wh V-mount
MINO-S70 is a pocket fit tiny size V-mount battery for handheld cameras, monitors and other camera gears. It powers RED V-raptor for at least 1 hour and offers minimum weight for stablizer installation
Thinner and Light Weight
The MINO-S70 is 37mm thickness, standard V-mount connector, and only 419g light weight for handheld camera gears.
70Wh, 100W/8A Load
MINO-S70 consists of 4 high capacity cells, with 70Wh/4.9Ah high capacity, and support at least 100W/8A constant high load output.
USB-C 35W Charging Input
MINO-S70 battery can be charged by USB-C charger, supports PD 5V/9V/12V/15V/20V(Max) 1.75A, 35W charging input, which means you can fully charge the 70Wh battery within 2.5 hours.
Wire-Free Internal Tech
MINO-S70 has innovative "Wire-Free internal technic. All the cells, D-tap, USB-A, USB-C, power indicator devices are directly soldered onto PCB, no connecting wires, to reduce internal resistance effectively, and make the circuit stable, safe, and reliable.
###
Battery plate
V-mount
Nominal voltage
14.4V
Capacity
70Wh, 4.9Ah
Power IN&OUT
Electrodes: 100W 8A out, 16.8V 3A in
D-tap: 100W 8A out, 16.8V 3A in
USB-A: 10W, 5V/2A out
USB-C: Max 65W out, 5V/9V/12V/15V/20V(Max) 3.25A
BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP
Max 35W in, 5V/9V/12V/15V/20V(Max) 1.75A
Dimension
105—79.6—37mm (Fit RED Raptor)
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)
Net weight
Net 419g; With package0.45kg
FEATURES
4-ch simultaneous fast charging
Charge both 14.4V and 28.8V V-mount batteries
100W/6A for SWIT 14.4V & 160Wh batteries
100W/3A for SWIT 28.8V & 160Wh batteries
50W/3A for other batteries
5-inch color LCD info display
Battery cycle times display
Top large charging indicators
4x100W Fast Charger for both 14.4V and 28.8V batteries
PC-P461S can charge 4 V-mount batteries simultaneously, support both 14.4V and 28.8V nominal voltage batteries. Super fast charging 100W/6A for 14.4V batteries, and 100W/3A for 28.8V batteries, save up to 60% charging time comparing to normal chargers.
SWIT 160Wh batteries support 100W fast charging, for less capacity or other brand batteries, the charging current will limit to 50W/3A.
Top Charging Indicators
Besides LCD screen info, you can check the charging status at a glance by the 4 large size indicators on the top of the charger.Red on: 0-80%Green flashing: 81%-99%Green on: 100% fully chargedRed flashing: Charging error, check LCD info
Light Weight and Portable
The 4 channel fast charger PC-P461S has minimized the size and weight, and the new handle design makes the charger solid and easy to carry.
###
Power
Max 450W
Input
AC100V-240V 50/60Hz
Output
DC 16.8V, 6Ax4 (SWIT 14.4V & 160Wh batteries)
DC 33.6V, 3A—4 (SWIT 28.8V & 160Wh batteries)
DC 16.8V, 3A—4 (Other batteries)
Applicable battery
V-mount battery
Dimensions
330—153—162mm
Net weight
Net 2.43kg; With package 3.3kg
Features
8V (22-33.6V) high voltage
Standard V-mount connection
420Wh large capacity
500W constant high load, 650W peak load
6V 100W fast charging support
5-LED digital power indicators
Multiple circuit protections
Huge V-mount Battery for Lights
HB-C420S provides the world's largest capacity: 420Wh of handheld V-mount battery, and the world's largest constant power load: 500W, to drive high power cine lights at longest time. For example, 2x HB-C420S could power Aputure LS 600C PRO at 100% output, and at least 1.2 hours.
28.8V, 420Wh, 500W Load
HB-C420S consists of 24pcs Li-ion cells, 28.8V (22-33.6V) high voltage, 420Wh large capacity, 500W constant load.Please do not use the battery on the device that doesn't support 22-33.6V input.
500W Constant High Load
HB-C420S outputs at least 500W high load even at 1% capacity (Peak load up to 650W), to drive high power gears like the cines lights.
48V 750W Power Solution
Use SWIT dual batteries light stand adaptor TD-R230S, 2x HB-C420S could output 48V 750W to power cine lights like Skypanel S30/60/120, Orbiter, Creamsource Vortex 4 & Vortex 8, Aputure Nova P300/P600 etc.
Creamsource Vortex 8 Power
2x HB-C420S and TD-R230S power adaptor could output 48V 750W DC to full power drive Creamsource Vortex 8 light which requires 650W power.The 2 batteries totally have 840Wh capacity, comparable with a large floor battery but it's attached on light stand for easy movement, and will power the Vortex 8 for at least 1hr 20min.
100W Fast Charging
HB-C420S supports DC 33.6V 100W fast charging by PC-P461S charger, to save more than 60% charging time. The 420Wh battery can be charged from 0 to 80% after 3.9 hours, and fully charged within 5.3 hours.
###
Nominal Voltage
28.8V
Capacity
420Wh/14.6Ah
Power Load
500W constant, 650W peak
Charging
DC 33.6V, 3A
Mount Type
V-mount
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)
Net weight
Net 2.07kg; With package2.15kg
Dimensions
155—101—80mm
Features
4V/28.8V Bi-voltage B-mount
98Wh fly-friendly capacity
150W constant high load
6V 100W fast charging
D-tap 11-16.8V output —2
LED power & voltage indicators
Built-in LED torch
Strong 1.2m drop off proof
Multiple circuit protections
14.4V/28.8V Bi-Voltage
B-mount Battery
BIVO-98 is a 14.4V(11-16.8V) and 28.8V (22-33.6V) Bi-voltage B-mount battery, for ARRI cameras and various compatible with regular voltage cameras and cinegears. The battery will recognize the ID pin resistor value of the B-mount plate, and then output 14.4V or 28.8V, without any misuse risks.
98Wh Fly Friendly Capacity
BIVO-98 battery is only 38mm thickness and 668g light weight for handheld shooting. It's 98Wh capacity, run at least 1 hour on ARRI ALEXA 35 camera, and not being restricted to board airplane.The battery provides at least 150W constant power load for cine cameras and devices.
2x D-tap Power Output
BIVO-98 provides with 2x D-tap power sockets.When the battery works at 14.4V voltage,the D-tap outputs 11-16.8V;When the battery works at 28.8V voltage,the D-tap output regulated 16V,to power all kinds of camera-top devices.
BIVO Series Family
The BIVO series Bi-voltage B-mount battery famaily has 98Wh, 160Wh, 196Wh, 290Wh, the different sizes and capacities, for stablizer handheld light weight or long time power selection.
LED Power/Voltage Indicators
BIVO-98 has 4-level LED power indicators and an independent blue LED to indicate battery voltage. When the battery attached to B-mount plate, the blue LED turned on means the battery outputs 28.8V high voltage, and the blue LED off means the battery is 14.4V regular voltage.
33.6V Fast Charging
You can charge 4x BIVO-98 simultaneously on SWIT PC-P461B B-mount charger, at 33.6V, 50W fast charging. The charger will take approx. 3 hours to fully charge 4x BIVO-98 batteries.
LED Torch
You can double press the Power Check button to switch on LED torch on the rear side of the battery, to help you to find B-mount plate in dark production environment.Double press the Power Check button again to switch the light off, and it will be automatically switched off after 30 seconds.
1.2 meters Drop-off Proof
BIVO-98 battery can survive from 1.2 meters drop-off at any angles, strong and reliable for filmmakers.
###
Voltage
28.8V (21.6-33.6V) & 14.4V (10.8-16.8V)
Capacity
98Wh
Constant load
(28.8V) 150W, 6A;
(14.4V) 150W, 12A
Charging
33.6V 50W fast charging
Mount Type
B-mount
D-tap —2
14.4V status: 10.8-16.8V out, 150W load28.8V status: 16V regulated out, 50W load
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)
Net weight
Approx 668g
Dimensions
144—100—38mm
FEATURES
4V/28.8V Bi-voltage B-mount
160Wh high capacity
200W constant high load
6V 100W fast charging
D-tap 11-16.8V output —2
OLED power info display
Built-in LED torch
Strong 1.2m drop off proof
Multiple circuit protections
14.4V/28.8V Bi-Voltage
B-mount Battery
BIVO-160 is a 14.4V(10.8-16.8V) and 28.8V (22-33.6V) Bi-voltage B-mount battery, for ARRI cameras and various compatible with regular voltage cameras and cinegears. The battery will recognize the ID pin resistor value of the B-mount plate, and then output 14.4V or 28.8V, without any misuse risks.
160Wh Capacity, 200W Load
BIVO-160 battery has 160Wh large capacity, run nearly 2 hours on ARRI ALEXA 35 camera, and each passenger is allowed to carry 2pcs to board airplane. The battery provides at least 200W constant high load for cine cameras and devices.
2x D-tap Power Output
BIVO-160 provides with 2x D-tap power sockets.When the battery works at 14.4V voltage,the D-tap outputs 11-16.8V;When the battery works at 28.8V voltage,the D-tap output regulated 16V,to power all kinds of camera-top devices.
BIVO Series Family
The BIVO series Bi-voltage B-mount battery famaily has 98Wh, 160Wh, 196Wh, 290Wh, the different sizes and capacities, for stablizer handheld light weight or long time power selection.
OLED Power Info Display
BIVO-160 battery provides an OLED screen to display battery status and power information, includes output voltage, power percentage, remaining running time, and protection warning code if any abnormal detected.
100W Super Fast Charging
You can charge 4x BIVO-160 simultaneously on SWIT PC-P461B B-mount charger, at 33.6V 3A, 100W super fast charging. The charger will take approx. 2 hours 40 minutes to fully charge 4x BIVO-160 batteries.
ED Torch
You can double press the Power Check button to switch on LED torch on the rear side of the battery, to help you to find B-mount plate in dark production environment.Double press the Power Check button again to switch the light off, and it will be automatically switched off after 30 seconds
1.2 meters Drop-off Proof
BIVO-160 battery can survive from 1.2 meters drop-off at any angles, strong and reliable for filmmakers.
Features
4V/28.8V Bi-voltage B-mount
196Wh high capacity
200W constant high load
6V 100W fast charging
D-tap 11-16.8V output —2
OLED power info display
Built-in LED torch
Strong 1.2m drop off proof
Multiple circuit protections
14.4V/28.8V Bi-Voltage
B-mount Battery
BIVO-200 is a 14.4V(10.8-16.8V) and 28.8V (22-33.6V) Bi-voltage B-mount battery, for ARRI cameras and various compatible with regular voltage cameras and cinegears. The battery will recognize the ID pin resistor value of the B-mount plate, and then output 14.4V or 28.8V, without any misuse risks.
196Wh Capacity, 200W Load
BIVO-200 battery has 196Wh large capacity, run more than 2 hours on ARRI ALEXA 35 camera. The battery provides at least 200W constant high load for cine cameras and devices.
2x D-tap Power Output
BIVO-200 provides with 2x D-tap power sockets.When the battery works at 14.4V voltage,the D-tap outputs 11-16.8V;When the battery works at 28.8V voltage,the D-tap output regulated 16V,to power all kinds of camera-top devices.
BIVO Series Family
The BIVO series Bi-voltage B-mount battery family has 98Wh, 160Wh, 196Wh, 290Wh, the different sizes and capacities, for stablizer handheld light weight or long time power selection.
OLED Power Info Display
BIVO-200 battery provides an OLED screen to display battery status and power information, includes output voltage, power percentage, remaining running time, and protection warning code if any abnormal detected.
100W Super Fast Charging
You can charge 4x BIVO-200 simultaneously on SWIT PC-P461B B-mount charger, at 33.6V 3A, 100W super fast charging. The charger will take approx. 3 hours to fully charge 4x BIVO-200 batteries.
LED Torch
You can double press the Power Check button to switch on LED torch on the rear side of the battery, to help you to find B-mount plate in dark production environment.Double press the Power Check button again to switch the light off, and it will be automatically switched off after 30 seconds
1.2 meters Drop-off Proof
BIVO-200 battery can survive from 1.2 meters drop-off at any angles, strong and reliable for filmmakers.
###
Voltage
28.8V (21.6-33.6V) & 14.4V (10.8-16.8V)
Capacity
196Wh
Constant load
(28.8V) 200W, 8A
(14.4V) 200W, 16A
Charging
33.6V 100W fast charging
Mount Type
B-mount
D-tap —2
14.4V status: 10.8-16.8V out, 200W load28.8V status: 16V regulated out, 50W load
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)
Net weight
Net 1.1kg; With package1.15kg
Dimensions
144—100—54mm
FEATURES
Square shape design for Cine-cameras
290Wh, 20.1Ah large capacity
At least 200W, 16A constant load
4— D-tap output sockets
1— USB 5V/2A power output sockets
100W 6A super fast charging
OLED display accurate remaining run time
Display power info in both SONY & RED
Multiple circuit protections
Square shape design for Cine-cameras
PB-S series camera batteries are compact designed, shorter than normal V/Gold mount batteries, and match perfectly with most of the Cine-cameras.
290Wh / 20.1Ah Capacity
Consists of 24pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 290Wh / 20.1Ah high capacity. Can run approx 10 hours for normal ENG cameras and approx 3.5 hours for ARRI ALEXA.
High Load for Cine Cameras
At least 200W / 16A load
PB-S290S provides at least 200W/16A high load even at 1% power, to drive high power Cine cameras and on-camera devices together. The high load cells will also ensure battery life comparing to normal load batteries if long time full load output.
4— D-tap, 1— USB
PB-S290S provides 4x D-tap output sockets with 10A/120W load, and 1x USB 5V/2A socket, to power other on-camera devices together.
100W 6A Fast Charging
Using SWIT 6A fast charger
PB-S290S supports 6A fast charging by SWIT PC-P461S or S-3812S fast charger, to save more than 50% charging time. The 290Wh PB-S290S battery can be charged from 0 to 80% after 2.5 hours, and fully charged within 3.8 hours.
Digital Power Info
OLED display accurate remaining run time
The build-in OLED can displays remaining power percentage, remaining working time, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.
Battery Protection Display
When any over load, over charging, short circuit, high/low temperature detected, the battery will protect itself and display protection information. You can take steps to re-active battery, to ensure the best battery condition and prolong battery life.
###
Model
PB-S290S
Battery plate
V-mount
Nominal voltage
14.4V
Capacity
290Wh, 20.1Ah
Max output
In total: 200W
Electrodes: 200W,16A
USB:10W, 5V/2A
D-tap: 120W / 10A
Dimension
121—95—96mm
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)
Net weight
1.44kg
Max charging current
6A
D-TAP socket number
4
USB socket number
1
Features
4V/28.8V Bi-voltage B-mount
290Wh high capacity
250W constant high load
6V 100W fast charging
D-tap 11-16.8V output —2
OLED power info display
Built-in LED torch
Strong 1.2m drop off proof
Multiple circuit protections
14.4V/28.8V Bi-Voltage
B-mount Battery
BIVO-290 is a 14.4V(10.8-16.8V) and 28.8V (21.6-33.6V) Bi-voltage B-mount battery, for ARRI cameras and various compatible with regular voltage cameras and cinegears.
The battery will recognize the ID pin resistor value of the B-mount plate, and then output 14.4V or 28.8V, without any misuse risks.
290Wh Capacity, 250W Load
BIVO-290 battery has 290Wh large capacity, run more than 3 hours on ARRI ALEXA 35 camera.The battery provides at least 250W constant high load for cine cameras and devices.
2x D-tap Power Output
BIVO-290 provides with 2x D-tap power sockets.When the battery works at 14.4V voltage,the D-tap outputs 11-16.8V;When the battery works at 28.8V voltage,the D-tap output regulated 16V,to power all kinds of camera-top devices.
BIVO Series Family
The BIVO series Bi-voltage B-mount battery famaily has 98Wh, 160Wh, 196Wh, 290Wh, the different sizes and capacities, for stablizer handheld light weight or long time power selection.
OLED Power Info Display
BIVO-290 battery provides an OLED screen to display battery status and power information, includes output voltage, power percentage, remaining running time, and protection warning code if any abnormal detected.
100W Super Fast Charging
You can charge 4x BIVO-290 simultaneously on SWIT PC-P461B B-mount charger, at 33.6V 3A, 100W super fast charging. The charger will take approx. 3 hours 50 minutes to fully charge 4x BIVO-290 batteries.
LED Torch
You can double press the Power Check button to switch on LED torch on the rear side of the battery, to help you to find B-mount plate in dark production environment.Double press the Power Check button again to switch the light off, and it will be automatically switched off after 30 seconds.
1.2 meters Drop-off Proof
BIVO-290 battery can survive from 1.2 meters drop-off at any angles, strong and reliable for filmmakers.
###
Voltage
28.8V (21.6-33.6V) & 14.4V (10.8-16.8V)
Capacity
290Wh
Constant load
(28.8V) 250W, 10A
(14.4V) 250W, 20A
Charging
33.6V 100W fast charging
Mount Type
B-mount
D-tap —2
14.4V status: 10.8-16.8V out, 250W load28.8V status: 16V regulated out, 50W load
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease when operating below 0°)
Net weight
Net 1.52kg; With package1.6kg
Dimensions
144—100—70mm
Features
100W COB LED Fresnel studio light
Fanless, absolutely silent
12-26° Flood/Spot angle adjust
60,000Lux@1m high bright hard light
5600K daylight color temperature
0-100% flick-free dimming
CRI Ra 96, TLCI 97
DMX512 In & out dimmer control
USB power out for wireless DMX receiver
LCD display color, dimmer and DMX addr
PowerCON TRUE1 AC in and loop out
4-leaf metal barn doors and Yoke bracket
100W Fanless Fresnel Light
Brighter, harder, absolutely silent
FL-C100 is a 100W COB-LED fresnel light of daylight color temperature, 60,000Lux @1m high bright, with DMX control, high CRI/TLCI and accurate color performance, and no fan, no noise at all, for broadcast studio, theatre, film set install applications.
5600K Daylight Color Temp
FL-C100 outputs accruate and stable 5600K color temperature for daylight studio application.
Accurate Color Render
CRI (Color Rendering Index) is a measure of the ability of a light source to reveal the colors of various objects faithfully in comparison with a natural light source. And TLCI (Television Lighting Consistency Index) is special for the color reveal ability by camera sensor. Max value 100.
The normal LED light has 80-85 CRI or TLCI, while FL-C100 offers the ultra high CRI at 96 and TLCI at 97, and will not lose the object original colors.
DMX, AC IN & LOOP
FL-C100 provides 5-pin XLR DMX512 in and out, with a 5V USB-A socket to power wireless DMX receiver. For convenient studio installation, the FL-C100 provides PowerCON True 1 AC in and loop out sockets, which will loop through more than 25x FL-C100 lights under 220V AC voltage, and 13x FL-C100 lights under 110V voltage.
4-leaf Metal Barn Door
FL-C100 is equipped with 4-leaf metal barn doors, dismountable and rotatable. The light also provides a special black-out cloth to prevent the light leakage.
Features
100W COB LED Fresnel studio light
Fanless, absolutely silent
12-26° Flood/Spot angle adjust
55,000Lux@1m high bright hard light
2700K-6500K continuously adjust
0-100% flick-free dimming
CRI Ra 97, TLCI 99
DMX512 In & out dimmer control
Dimmer/Color Temp independent DMX addr
USB power out for wireless DMX receiver
LCD display color, dimmer and DMX addr
PowerCON TRUE1 AC in and loop out
4-leaf metal barn doors and Yoke bracket
100W Fanless Fresnel Light
Brighter, harder, absolutely silent
FL-C100D is a 100W Bi-color COB-LED fresnel light, 55,000Lux @1m high bright, with DMX control, high CRI/TLCI and accurate color performance, and no fan, no noise at all, for broadcast studio, theatre, film set install applications.
2700K-6500K Continuous
FL-C100D COB-LED includes100W 2700K and 100W 6500K LED, and can be continuously adjusted between 2700K and 6500K. The light outputs 100W at any color temperature.
Accurate Color Render
CRI (Color Rendering Index) is a measure of the ability of a light source to reveal the colors of various objects faithfully in comparison with a natural light source. And TLCI (Television Lighting Consistency Index) is special for the color reveal ability by camera sensor. Max value 100.
The normal LED light has 80-85 CRI or TLCI, while FL-C100D offers the ultra high CRI at 97 and TLCI at 99, and will not lose the object original colors.
DMX, AC IN & LOOP
FL-C100D provides 5-pin XLR DMX512 in and out, with a 5V USB-A socket to power wireless DMX receiver.
For convenient studio installation, the FL-C100D provides PowerCON True 1 AC in and loop out sockets, which will loop through more than 25x FL-C100D lights under 220V AC voltage, and 13x FL-C100D lights under 110V voltage.
Independent DMX Addr Setting
The regular Bi-color lights use N and N+1 to set Dimmer and Color temp DMX addresses, which means 1x light occupy 2x DMX sliders on the console.
Now the FL-C100D can set independent DMX addresses for Dimmer and Color temp. For example you can set Color temp DMX 024 for every light, and Dimmer DMX 001, 002, 003... sequentially, to save sliders on the console.
4-leaf Metal Barn Door
FL-C100D is equipped with 4-leaf metal barn doors, dismountable and rotatable. The light also provides a special black-out cloth to prevent the light leakage.
Features
IP54 water/dust proof
Strong 1.5m drop off proof
4V, 220Wh capacity
200W, 16A constant high load
100W 6A fast charging
8-LED digital power indicators
SONY/RED viewfinder power info display
D-tap power output socket
V-mount connection
Multiple circuit protections
Heavy Duty Battery
High load & IP54 waterproof
PB-R220S+ is a 220Wh V-mount battery, for Cine and ENG cameras, with dual housing heavy duty sealed structure, IP54 rainproof, 1.5m drop-off proof. The battery supports high load, fast charging and digital power info display, for field applications
IP54 Waterproof
1.5 meters drop-off proof
PB-R220S+ has dual housing sealed structure to support IP54 waterproof in rain, snow and other inclement weather. The dual housing with rubber cover is also strong enough to survive from 1.5 meters any angles drop-off.
220Wh / 15.3Ah Capacity
Consists of 24pcs high class 18650 battery cells, and reaches 220Wh / 15.3Ah high capacity.
Can run approx 9 hours for normal ENG cameras, and approx 2.5 hours for ARRI ALEXA.
High Load for Cine Cameras
200W / 16A constant load
PB-R220S+ provides at least 200W/16A high load even at 1% power, to drive high power Cine cameras and on-camera devices together. The high load cells will also ensure battery life comparing to normal load batteries if long time full load output.
100W/6A Fast Charging
Using SWIT 6A fast charger
PB-R220S+ supports 6A fast charging by SWIT PC-P461S or S-3812S fast charger, to save more than 50% charging time. The 220Wh PB-R220S+ battery can be charged from 0 to 80% after 2.3 hours, and fully charged within 3.5 hours.
Digital Power Info
8-LED + SONY&RED viewfinder info
PB-R220S+ has the innovative 8-LED power indicators. When free or charging, the LEDs will indicate current capacity percentage, and when battery is discharging, the LEDs will display the remaining running time at the current discharging power, accurate to 15 minutes. Meanwhile, the battery pack adopts intelligent SMBUS that compatible with both SONY and RED camera info system, and can display remaining minutes on camera viewfinder.
D-tap Socket
A D-tap DC output socket is equipped on the top side of the battery pack, to power the other on-camera equipments together.
The Max output current of D-tap is 10A.
Features
8-ch simultaneous fast charging
º Charge both 14.4V and 28.8V V-mount batteries
º 100W/6A for SWIT 14.4V & 160Wh batteries
º 100W/3A for SWIT 28.8V & 160Wh batteries
º 50W/3A for other batteries
º 2— 3.5-inch color LCD info display
º Battery cycle times display
º Large LED charging indicators
º Wall mounting or 19-inch rack install
8x100W Ultra Fast Wall Charger
MATRIX-S8 is an 8-ch simultaneous V-mount wall charger with 100W ultra fast charging speed each channel, save up to 60% charging time comparing to normal chargers, supports both 14.4V and 28.8V batteries, for TV stations and rental houses installation.
Flexible Wall Mounting Plate
MATRIX-S8 provides with a wall mounting plate on the backside, to be screwed onto the wall, or mounting to standard 19-inch rack bracket. You can even install the mounting plate onto storage rack or DIT cart.
3.5-inch Color LCD and Indicators
MATRIX-S8 provides 2x 3.5-inch color LCD to display charging progress, charging current, voltage, battery cycle times for each channel.You can also check the charging status by large charging indicators from a distance.
65Wh Panasonic VBR59 Batterywith D-tap and USB-C
LB-PD65C is a 65Wh large capacity Panasonic AG-VBR59 compatible battery with regulated 12V D-tap output and 25W USB-C in/out, diversity power for camera top devices.
65Wh Large Capacity
LB-PD65C consists of 6pcs battery cells and has 65Wh/9020mAh large capacity to keep your video devices powered for longer time. The constant power load is 30W/4A.Compatible Panasonic cameras: AU-EVA1, AG-DVX200, AJ-PX230/270/UPX360 AG-CX350, AG-UX90/180, AG-AC30, etc.
Reg. 12V D-tap Output
The LB-PD65C battery provides a D-tap power output socket of regulated 12V voltage, widely compatible with various kinds of video devices.* The D-tap has 7.2V to 12V (Reg.) conversion and it' s not allowed to charge input via this D-tap socket.
USB-C 25W Output
Fast Charging iPhone 12/13
LB-PD65C provides a USB-C sockets, supports 5V 3A, 9V 2.8A, 12V 2.1A, 15V 1.7A, 20V 1.3A, 25W power output to fast charge iphone 12/13 and all kinds of USB-C smart phones or tablets, with BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP multiple protocols.
USB-C 25W Charging Input
You can also charge LB-PD65C by USB-C charger. Supports PD 5V 3A, 9V 2.8A, 12V 2.1A, 15V 1.7A, 20V 1.3A, 25W power input, which means you can fully charge the 65Wh battery within 3.5 hours.
4-level Power Indicator
Press the power check bottom, the 4-level LEDs indicates remaining power percentage.
4-way Charging
The Swit LB-PD65C can be charged by Panasonic original charger, and SWIT LC-D421 4-way charger you can charge 4 batteries simultaneously, and fully charging within 5 hours.
###
Nominal Voltage
7.2V
Capacity
65Wh, 9.02Ah
Max power load
30W, 4A
D-tap
12V (reg.) 1.7A, 20W
USB-C
25W input: 5V 3A, 9V 2.8A, 12V 2.1A, 15V 1.7A, 20V 1.3A
25W output: 5V 3A, 9V 2.8A, 12V 2.1A, 15V 1.7A, 20V 1.3A
BC1.2, QC2.0/3.0, PD2.0/3.0, FCP, SCP
Original batteries
Panasonic AG-VBR59/89/118G
Compatible Cameras
Panasonic AU-EVA1, AV-DVX200, AJ-PX230/270
Panasonic AJ-UPX360, AG-CX350, AG-UX90/180, AG-AC30
Dimension
41—70—83mm
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease
when operating below 0°)
Net weight
Approx 356g
###
Swit LB-PD65C Panasonic VBR59 Series Battery Pack
90Wh Canon BP-A Batterywith D-tap and USB-C
LB-CA90C is a 90Wh large capacity Canon BP-A compatible battery with D-tap output and 45W USB-C in/out, for Canon EOS C70, C200, C300MK2, C500MK2, XF605, XF705 cameras.
90Wh Large Capacity
LB-CA90C consists of 8pcs battery cells, 14.4V nominal voltage, 90Wh/6200mAh large capacity to keep cameras powered for longer time. The constant power load is 50W/4A.
14.4V D-tap Power Socket
The LB-CA90C BP-A battery provides a D-tap power socket of 11-16.8V voltage, 50W/4A load for various kinds of video devices. You can also charge the battery via the D-tap socket.
USB-C 45W for Laptop
LB-CA90C provides a USB-C socket of 5V/9V/12V/15V/20V(Max) 2.25A, 45W power output for various kinds of laptop, tablets or smart phones, supports BC1.2, PD2.0/3.0, QC2.0/3.0, FCP, SCP multiple protocols.(For Macbook 13, Macbook Pro 13/15, ThinkPad New S2/T470/X270, Dell XPS 13/Latitude, HP Spectre x360-13/EliteBook Folio G1, Samsung Chromebook Plus, Google Pixelbook, Huawei Matebook, etc)
USB-C 45W Charging Input
You can also charge LB-CA90C by USB-C charger. Supports 5V/9V/12V/15V/20V(Max) 2.25A, 45W power input, which means you can fully charge the 90Wh battery within 3 hours.
4-level Power Indicator
Press the power check bottom, the 4-level LEDs indicates remaining power percentage.
D-tap Charging
Besides USB-C charging, LB-CA90C can be charged by Canon original CG-A20 charger, or by SWIT ultra portable 2-way D-tap charger PC-U130B2, fully charge within 2h 40m.
###
Nominal Voltage
14.4V
Capacity
90Wh, 6.2Ah
Max power load
50W, 4A
D-tap
14.4V, 50W, 4A
USB-C
45W input: 5V/9V/12V/15V/20V, 2.25A
45W output: 5V/9V/12V/15V/20V, 2.25A
BC1.2, QC2.0/3.0, PD2.0/3.0, FCP, SCP
Original batteries
Canon BP-A30, BP-A60
Compatible cameras
Canon EOS-C70, EOS-C200,
Canon EOS-C300 Mark ii, EOS-C500 Mark ii
Canon XF605, Canon XF705
Dimension
70—42—96mm
Charging Temperature
0-40°C
Discharging Temperature
-20°C-50°C (Capacity and Max Load may decrease
when operating below 0°)
Net weight
Approx 460g
###
Swit LB-CA90C Canon BP-A Series Battery Pack