With its continued stellar reputation in high-definition distribution, Kramer once again raises-the-bar of excellence with its TP-210A 1:10 UXGA, Audio and Line Transmitter and Distribution Amplifier. Designed and built with both professional video facility installation pundits and presentation/multimedia enthusiasts in mind, this unit offers twisted pair (RJ-45) signal conversion from a 15-pin HD UXGA computer graphics video, stereo analog and S/PDIF audio, and RS-232 control signals. It's capable of distributing up to (10) identical twisted pair outputs, and also distributes each signal (UXGA, analog and S/PDIF audio) to (2) additional outputs.
The TP-210A is compatible with HDTV signals, supports resolutions up to WUXGA and 1080p, offers a system range of up to 320' (100 m), and works in conjunction with Kramer's compatible (TP-124) receivers. It's ideal for sending computer graphics video and audio signals over shielded or unshielded twisted pair (STP/UTP) cabling such as standard CAT5 (Ethernet network cable). It features sync polarity settings for improved transmission and twisted pair compatibility - Power Connect System and world-wide voltage compatibility with its included 100-240VAC power supply will further expand your installation possibilities.
With its superb signal reliability and twisted pair signal technology, the Kramer TP-210A is an ideal solution for long distance computer graphics cable transmission and distribution often required by broadcast studios, educational, security and military installations. In addition, it offers a low-profile design of only 1U that can be mounted in a standard 19" equipment rack by using the included rack ears.
Note:
This unit must be used in conjunction with a compatible receiver (i.e. TP-124) to achieve a complete solution.
Twisted Pair (RJ-45) Signal Transmission
Twisted pair (RJ-45) cabling uses 2 conductors (forward and return) that are twisted together in a specific fashion (pitch/twist rate per meter) to cancel out electromagnetic interference and crosstalk (noise) from external sources and its environment. This technology enables a system range up to 320' (100 m) at a maximum resolution up to WUXGA and 1080p HDTV. For best results use Kramer's BC-SXTP Shielded Twisted Pair (STP) skew-free cables for transmitting VGA signals, and BC-STP (STP) non-skew cables for digital signals.
Supports WUXGA and HDTV Signals
Its video transport circuitry supports computer graphics video signals with maximum resolutions up to WUXGA and HDTV/1080p.
Stereo and S/PDIF Audio
This unit will accept unbalanced stereo audio on the 3.5mm mini-jack input and S/PDIF audio on the RCA input connector then simultaneously output the same audio signals to (10) twisted pair outputs and (2) stereo audio and (2) S/PDIF audio outputs.
RS-232 Control
If an RS-232 control signal is detected from the RS-232 terminal block, this unit will convert the signal and output it on (10) identical twisted pair outputs.
Power Connect System
Within a transmitter/receiver system, only one unit requires power when connected devices are within a 150' (50 m) range of each other; 12VDC power is then distributed through the CAT5 cable.
Large Venue Solution
The TP-210A is an ideal solution for schools, transportation hubs, hospitals, financial institutions, commercial/retail installations, virtually any large venue that requires high-quality, long distance twisted pair video distribution.
Rackmountable
Aside from its rugged chassis, the TP-210A includes (2) rack ears; when installed, it fits within a standard 19" rack mount in a 1U rack space.
###
Type
Transmitter/Distribution Amplifier
Supports
RGBHV/HDTV on UXGA connector
Resolution
Up to WUXGA and 1080p
Input
(1) 15-pin female HD, (1) Stereo Audio 3.5mm Mini-Jack, (1) S/PDIF Audio RCA Connector, (1) RS-232 Terminal Block (RxD line)
Output
(10) RJ-45 Connectors (CAT5), (2) 15-pin female HD, (2) Stereo Audio 3.5mm Mini-Jacks, (2) S/PDIF Audio RCA Connectors, (1) RS-232 Terminal Block (TxD line)
Loop-Through
Yes
Other
No
Range
320' (100 m)
Controls
No
Switch
Yes (VS and HS Polarity)
Compatibility
TP-124 and other CAT5 Receivers
Requirements
Kramer Cobra Series CAT5 ReceiverCable: CAT5 shielded or unshielded twisted pair
General
Power Requirements
100-240VAC 50/60Hz (supplied by power adapter)
Dimensions
19 x 1.7 x 9.3" (482.6 x 43.1 x 236.2mm) w/rack ears
Weight
6.6 lbs (3kg)
Color
Black
###
Kramer TP-210A 1:10 UXGA, Audio and Line Transmitter and Distribution Amplifier
Power Adapter
2 x Rack Ears
7-Year Limited Warranty
The VP554X is a highperformance presentation scaler/switcher with 4 pairs of independent and scaled outputs. It includes multiple HDMI and HDBaseT inputs “ supporting resolutions up to 4K “ as well as a legacy VGA input, and each of the 4 outputs is mirrored on both HDMI and HDBT.VP554X supports embedded and balanced analog stereo audio, up to 2 microphone inputs, DSP audio features and a builtin stereo power amplifier. It includes a builtin Ethernet switch and supports legacy RS232, and IR, Ethernet and RS232 tunneling over HDBT.
Pix“Perfect„ Scaling Technology ” Kramer's precision pixel mapping and high“quality full up ” and down“scaling technology.
High“Performance Switcher/Scaler ” Scales the video and provides constant output sync to prevent signal disruption when switching between inputs and when no video is detected.
HDCP 2.3 Compliance ” The HDCP (High Definition Content Protection) license agreement allows copy“protected data on the HDMI input to pass to HDCP compliant outputs.
Resolutions ” Up to 4K60 4:4:4 on the HDMI ports; up to 4K60 4:2:0 on the HDBaseT ports; and up to 1080p60 on the VGA input.
System Range for the HDBT inputs and outputs ” Up to 100m for 4K; 180m for 1080p.
4x1 USB Switcher ” Can be set to follow the switching of the video layer or as an independent switcher.
Audio DSP Features, including input and output level adjustments, microphone talkover, mixing, and EQ.
Analog & Embedded Audio Support.
Built“in Power Amplifier ” 2x20W.
Built“in Video ProcAmp ” Color, hue, sharpness, noise, contrast, and brightness.
Option for video wall output mode.
Multiple Control Options ” Front panel buttons with OSD, RS“232, Ethernet and built“in Web pages.
Includes numerous filters and algorithms for eliminating picture artifacts.
Converts to 4K60 4:2:0 on HDBaseT outputs when its corresponding mirrored HDMI output resolution is 4K60 4:4:4 (similarly for 4K50).
HDMI Support ” HDR10, CEC, xvYCC color (on input), Dolby TrueHD/DTS“HD Master Audio (by“pass), as specified in HDMI 2.0 as specified in HDMI 2.0.
Multiple aspect ratio selections.
Advanced EDID management per input.
Includes non“volatile memory that retains the last settings, after switching the power off and then on again.
STO and RCL buttons, a RESET TO XGA/1080P button (to hardware“reset the output resolution); and a PANEL LOCK button.
Built“in video Proc“Amp ” color, hue, sharpness, contrast, and brightness are set individually for each output.
An OSD (On“Screen Display) ” for making adjustments ” that can be located anywhere on the screen.
Efficient power“saving features.
Advanced EDID management per input.
Includes non“volatile memory that retains the last settings, after switching the power off and then on again.
11 input buttons for switching a selected input to an output.
Scaled video outputs ” 4 pairs of mirrored HDMI and HDBT outputs.
Embedded audio on the HDMI and HDBT inputs and outputs.
11 input buttons for switching a selected input to an output.
Embedded audio on the HDMI and HDBT inputs and outputs.
Scaled video outputs ” 4 pairs of mirrored HDMI and HDBT outputs.
Top of Form
APPLICATIONS
Presentation and multimedia.
Projection systems in conference rooms, boardrooms, auditoriums, hotels and churches, production studios, rental and staging.
Any application where high quality conversion and switching of multiple and different video signals to graphical data signals is required for display or projection purposes.
###
INPUTS
6 HDMI: On female HDMI connectors
1 PC: On a 15“pin HD connector
4 HDBT: On RJ“45 female connectors
8 Stereo Analog Balanced Audio: On 5“pin terminal block connectors
2 Unbalanced Mono Audio: On 3“pin terminal block connectors
OUTPUTS
4 HDMI: On female HDMI connectors
4 HDBT (mirrored with each HDMI output): On RJ“45 female connectors
5 Balanced Stereo Audio: On 5“pin terminal block connectors
1 Stereo Balanced Audio: On a 4“pin large terminal block
LINE LEVEL INPUT
Impedance: 16.6k„¦
Maximum level: +14.7dBu (4.2Vrms)
Sensitivity: Full power @ +8.7dBu (2.1Vrms) for OUT =1.9Vrms
MICROPHONE LEVEL INPUT
Impedance: 47k„¦
Sensitivity: Full power @ ” 37dBu (11mVrms) for OUT =1.9Vrms
Phantom Power: 48Vdc on/off per input
LINE LEVEL OUTPUT
Impedance: 500„¦
Frequency Response: 20Hz ” 20kHz @ +/“1dB
S/N Ratio: >75dB, 20Hz ” 20kHz (unweighted),
S/N Ratio: >81dB, 20Hz ” 20kHz (A“weighted)
Audio THD + Noise: <0.014%, 20Hz ” 20kHz (unweighted),
Audio THD + Noise: <0.0092%, 20Hz“20kHz (A“weighted)
Crosstalk: <“93 dB, 20Hz to 20kHz
AMPLIFIER
Output Power: 2 x 20W into 4„¦
Amplifier Class: D
Maximum Voltage Gain: 26dB BTL
Dynamic Range: 103 dB A“Weighted
Frequency Response: 20Hz ” 20kHz @ +/“1dB
S/N Ratio: >68 dB, 20Hz ” 20kHz (unweighted)
Audio THD + Noise: <0.037%, 20Hz ” 20kHz (unweighted)
Crosstalk: <“77 dB, 20Hz to 20kHz
PORTS
4 IR (for HDBT Outputs): On terminal block connectors for IR link extension
4 IR (for HDBT Inputs): On terminal block connectors for IR link extension
4 RS-232 (for HDBT Outputs): On terminal block connectors for serial link extension
4 RS-232 (for HDBT Inputs): On terminal block connectors for serial link extension
5 USB: 4 USB Hosts on USB“B connectors
5 USB: 1 USB Client on a USB“A connector
1 USB: On a USB“A connector for firmware upgrading
2 RS-232: On 3“pin terminal block connectors
4 100BaseT Ethernet: On RJ“45 female connectors for device control and LAN extension
VIDEO
Max Resolution: HDMI: 4K60 4:4:4
Max Resolution: HDBT: 4K60 4:2:0
Max Resolution: PC (VGA):1080p
Compliance: Up to HDMI 2.0 and HDCP 2.2
EXTENDED ETHERNET
Max Transmission Bandwidth: 100Mbps
EXTENDED RS-232
Baud Rate: 300 to 115200
CONTROL RS-232
Baud Rate: 115200
POWER
Max, Power Consumption: 190VA
Storage Temperature: “40° to +70°C (“40° to 158°F)
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +40°C (32° to 104°F)
Humidity: 10% to 90%, RHL non“condensing
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
Safety: CE, FCC
Environmental: RoHs, WEEE
ENCLOSURE
Size: 19 2U
Type: Aluminum
Cooling: Fan ventilation
ACCESSORIES
Included: Power adapter cord
PRODUCT DIMENSIONS
43.69cm x 23.60cm x 8.80cm (17.20" x 9.29" x 3.46" ) W, D, H
PRODUCT WEIGHT
5.0kg (11.0lbs) approx.
SHIPPING DIMENSIONS
52.60cm x 47.50cm x 18.40cm (20.71" x 18.70" x 7.24" ) W, D, H
SHIPPING WEIGHT
6.3kg (13.9lbs) approx.
VP550X is a versatile, professional presentation scaler/switcher for 4K@60 (4:4:4) HDMI, USBC, VGA, and composite video signals. The unit scales the video and provides options to use the embedded digital audio or to select analog audio input signals. After processing and scaling, the embedded AV signal is sent to the 2 mirrored HDMI outputs simultaneously, and the audio is also sent to a balanced stereo audio output.
High“Performance Switcher/Scaler ” Scales HDMI, USB“C (Alt“DP), VGA, and Composite video signals for outputting to two mirrored HDMI outputs. Constant output sync prevents signal disruption when switching between inputs and when no video is detected.
High“Resolution Video ” Supports and scales to/from resolutions up to 4K@60Hz (4:4:4). Complies with HDCP 2.2. Supports HDR10, CEC, xvYCC color (on input), Dolby TrueHD/DTS“HD Master Audio (by“pass), as specified in HDMI 2.0.
Professional Video Quality ” Provides selectable aspect ratios (full, best fit, over“scan, under“scan, letter box and pan scan). Includes built“in ProcAmp for color, hue, sharpness, noise, contrast, and brightness control. Supports PixPerfect„, Kramer's precision pixel mapping and high“quality scaling technology with full up“scaling and down“scaling of all video input signals.
Versatile Audio Options ” Includes a companion analog audio input for each of the 2analog video inputs and an additional AUX audio input ” enabling the user to embed analog audio channel into the video signal or to bypass an embedded audio input (for example, to support multi“channel, compressed audio formats like Dolby and DTS). Provides an independent microphone input (with optional 48V phantom power) for mixing, switching or talk“over. On the output, besides the audio embedded on the HDMI outputs, the audio signal is also extracted (de“embedded) and output as a balanced stereo analog audio signal.
Powerful Audio Features ” Includes DSP with audio equalization, mixing, delay and more.
Versatile Powering Options ” Receives power from a universal power supply (100“240V AC) and provides up to 18W of power to the USB“C input, HDTV Compatible.
4K and Legacy Inputs ” 7 HDMI and 1 USB“C 4K@60 (4:4:4) inputs, 1 VGA input, and 1 CV (composite video) input.
Non“Volatile Memory ” Saves final settings before shutdown and retains them for next power up.
Convenient Control Options ” Local control via front panel buttons (input selection, audio mute, freeze and front panel lock), RS“232, IR remote, and OSD. Long“distance control via Ethernet using embedded web pages.
Easy Installation ” 19 enclosure for rack mounting a unit in a 1U rack space with included rack ears and universal 100“240V AC power connection.
Top of Form
APPLICATIONS
Projection systems in conference rooms, boardrooms, hotels and churches
Home theater up“scaling
###
INPUTS
7 HDMI: On female HDMI connectors
1 USB (providing power): On a USB type“C connector
1 Computer Graphics: On a 15“pin HD connector
1 Composite Video: On an RCA connector
3 Unbalanced Stereo Analog Audio (AUX, VGA and CV): On 3“pin terminal blocks
Microphone: On 3“pin terminal block
OUTPUTS
2 HDMI: On female HDMI connectors
1 Balanced Analog Stereo Audio: On a 5“pin terminal block
PORTS
1 RS“232 (Data): On a 3“pin terminal block
1 RS“232 (Control): On a 3“pin terminal block
1 Ethernet: 100Mbps, on an RJ“45 connector
VIDEO
Input HDMI and USB-C Resolutions: 480i/576i, 480p/576p, 640x480@60/72/75/85Hz, 720p@60/50Hz, 800x600@56/60/72/75Hz, 1024x768@60/70/75Hz, 1080i@60/50Hz, 1080p@24/25/30Hz, 1080p@60/50Hz, 1280x1024@60/75Hz, 1280x720@60Hz, 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1600x1200@60Hz, 1600x900@60Hz RB, 1680x1050@60Hz, 1920x1080@60Hz, 1920x1200@60Hz RB, 4K2K@24/25/30/50/60Hz (4:4:4), 4K2K@50/60Hz (4:2:0)
Input Computer Graphics Resolutions: 640x480@60/72/75/85Hz, 800x600@56/60/72/75Hz, 1024x768@60/70/75Hz, 1280x1024@60/75Hz, 1280x960@60Hz, 1280x720@60Hz, 1280x768@60Hz, 1280x800@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@60Hz, 1920x1200@60Hz RB
Input CV Resolution: 480I/576i
Output HDMI Resolutions: 480p@60Hz, 576p@50Hz, 720p@50/60Hz, 1080p@24/25/30/50/60Hz, 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x768@60Hz, 1280x720@60Hz, 1280x800@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@60Hz, 1920x1200@60Hz RB, 4K/2K@50/60Hz (4:2:0), 4K/2K@24/25/30/50/60Hz (4:4:4)
Max. Input Resolution “ HDMI and USB-C: 4K@60Hz (4:4:4)
Max. Input Resolution “ VGA: 1080p60 / UXGA
Max.Output Resolution- HDMI: 4K@60Hz (4:4:4)
Content Protection: Up to HDCP 2.2
HDMI Support: HDR10, CEC, xvYCC color (on input), Dolby TrueHD/DTS“HD Master Audio (by“pass), as specified in HDMI 2.0
Latency: 1“2 frames
USER INTERFACE
Controls: IR remote, Input selection, freeze, mute, XGA/1080p reset, and panel lock buttons, OSD menu
Indicators: IR, selected input LEDs
POWER
Source: 100“240V AC 50/60Hz
Consumption: 1A
ENCLOSURE
Size: 19
Type: Aluminum
Cooling: Convection ventilation
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +40°C (32° to 104°F)
Storage Temperature: “40° to +70°C (“40° to 158°F)
Humidity: 10% to 90%, RHL non“condensing
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
Standards: CE, FCC
ACCESSORIES
Included: Power cord, rubber feet, rack ears, IR remote control with batteries
PRODUCT DIMENSIONS
43.64cm x 23.72cm x 4.36cm (17.18" x 9.34" x 1.72" ) W, D, H
PRODUCT WEIGHT
2.0kg (4.5lbs) approx.
SHIPPING DIMENSIONS
55.00cm x 33.00cm x 10.70cm (21.65" x 12.99" x 4.21" ) W, D, H
SHIPPING WEIGHT
3.0kg (6.5lbs) approx.
VP451 is a highperformance 18G 4K digital scaler for HDMI and USBC signals. The unit upscales, downscales, and crossscales to resolutions up to 4K@60 (4:4:4). The output resolution can be set to automatically follow the native resolution of the sink or set manually to a custom resolution.
High“Performance Professional Scaler ” Supports HDR10 and HDCP 2.2/1.4, and features input auto“switching, constant sync on the output even if the input video signal is lost or interrupted, and a built“in ProcAmp for convenient signal adjustment.
Fast, Smooth Manual and Auto Switching Between Sources ” Select the USB Type“C or one of the HDMI inputs, or configure the device to automatically select the active source.
Flexible Analog Audio Embedding and Extraction (De“embedding) ” The user can select the unbalanced analog audio input to embed into the HDMI output signal. On the output, the user can select to extract the audio signal and output it as balanced analog audio.
USB“C Powering ” Provides up to 60W of power via the USB“C input.
Automatic Display Control ” Supports CEC that enables automatically turning the display on and off.
Convenient Unit Control ” Control the unit using an OSD (On“Screen Display) via front panel buttons and input selector, video freeze and resolution reset front panel buttons. Additionally, connect to the contact closure connector for remote switching of sources. All settings are saved in non“volatile memory.
User“Friendly Operation ” LED indicator for each input and for power status. Local firmware upgrade via the USB type“A port ensures lasting, field“proven deployment.
Easy Installation ” Compact MegaTOOLS® fan“less enclosure for surface mounting or side“by“side mounting of 2 units in a 1U rack space with the recommended rack adapter.
###
INPUTS
2 HDMI: On female HDMI connectors
1 USB-C: On a female USB“C connector (USB3.1, DP Alternate Mode)
1 Unbalanced Stereo Audio: On a 3.5mm mini jack
OUTPUTS
1 HDMI: On a female HDMI connector
1 Balanced Analog Stereo Audio: On a 5“pin terminal block
PORTS
4 Contact Closure Switches: On a 4“pin terminal block
1 USB: On a USB“A connector for firmware upgrade
VIDEO
Max. Input Resolution: 4K@60 (4:4:4)
Max. Data Rate: 18Gbps (6Gbps per graphic channel)
Latency: 1“2 frames
Content Protection: HDCP 2.2 & 1.4
USER INTERFACE
Controls: Input selector, video freeze and resolution reset front panel buttons, OSD menu
Indicators: Selected input and power LEDs
POWER
Source: 24V DC
Consumption: Up to 3.4A (when charging USB“C devices at 60W)
ENCLOSURE
Size: MegaTOOLS®
Type: Aluminum
Cooling: Convection ventilation
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +40°C (32° to 104°F)
Storage Temperature: “40° to +70°C (“40° to 158°F)
Humidity: 10% to 90%, RHL non“condensing
ACCESSORIES
Included: Power adapter, bracket set, rubber feet
PRODUCT DIMENSIONS
18.75cm x 14.50cm x 2.54cm (7.38" x 5.71" x 1.00" ) W, D, H
PRODUCT WEIGHT
0.7kg (1.5lbs) approx.
SHIPPING DIMENSIONS
34.40cm x 20.90cm x 6.80cm (13.54" x 8.23" x 2.68" ) W, D, H
SHIPPING WEIGHT
1.3kg (2.8lbs) approx.
VP427X2 is a highperformance autoswitcher/scaler receiver with 2 HDBaseT inputs and a local HDMI input for 4K HDMI„ over extendedreach HDBaseT. It supports automatic and manual glitchfree switching between the 3 inputs, and up or downscaling to any resolution up to 4K@60Hz (4:4:4). The output scaling automatically matches the resolution of the HDMI display on the output, or it can be manually set by the user. VP427X2 enables extending video signals up to 180m over CAT copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions.
Comprehensive Receiver/Scaler ” Scales signals of all standard resolutions up to 4K@60Hz (4:4:4) for routing to the HDMI output. Constant output sync prevents signal disruption when switching between inputs and when no video is detected.
HDMI Signal Extension ” HDCP 1.4 / 2.2. 4K60, CEC, xvYCC color (on input).
Audio De“embedding ” Analog balanced stereo output for de“embedding the audio to speakers.
Data Tunneling ” Extend RS“232, IR, and Ethernet over the HDBaseT line.
Built“in Automated Control ” Includes easy connection to occupancy sensors and contact closure switches.
CEC Support ” Supports passing of CEC from input to output. Automatically sends CEC commands to shut down the output display after a timeout period when no input signal is found and to power up the display when the input returns.
Cost“Effective and Convenient Control Options ” Ethernet and RS“232 serial ports, and local control via front panel input selection and OSD menu buttons.
ProcAmp Control ” Contrast, brightness, color, etc.
Convenient Unit Control and Configuration Options ” Local control via front panel source switching buttons and OSD menu. Distance control via RS“232 serial commands transmitted by a PC, touch screen system or other serial controllers.
Easy, Cost“effective Maintenance ” Local firmware upgrade via USB connector.
Easy and Elegant Installation ” Compact MegaTOOLS„ fan“less enclosure for dropped“ceiling mounting, or side“by“side mounting of 2 units in a 1U rack space with the recommended rack adapter.
###
INPUTS
2 HDBaseT: On an RJ“45 connector
1 HDMI: On a female HDMI connector
OUTPUTS
1 HDMI: On a female HDMI connector
1 Balanced Analog Stereo Audio: On a 5“pin terminal block
PORTS
1 IR: On a 3.5mm mini jack
1 RS“232: On a 3“pin terminal block
1 Ethernet: 100Mbps, on an RJ“45 connector
VIDEO
Output Resolutions: 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x768@60Hz, 1280x800@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1200@60Hz RB, 2560x1600@60Hz RB, 1920x1080@60Hz, 1280x720@60Hz, 2048x1080@50/60Hz, 2560x1440@60Hz RB, 720x480p@60Hz, 720x576p@50Hz, 1280x720p@50/60Hz, 1920x1080p@24/25/30/50/60Hz, 2560x1080p@50/60Hz, 2K@24/25/30/50/60Hz, 4K@24/25/30/50/60Hz
Max. Range: 180m at 1080p@60Hz, 100m (328ft) at 4K@60Hz (4:2:0)
Latency: Up to 2 frames
Content Protection: HDCP 2.2/1.4
Switching Time Between Inputs: <2.5 seconds
USER INTERFACE
Control: Input selection buttons, and remote contact“closure switches switches. Kramer API via RS“232 serial commands transmitted by a PC, touch screen system or other serial controller, embedded web pages via LAN for configuration and control
Indicators: Power, link, input selection LEDs
POWER
Source: 12V DC
Consumption: 2.1A
ENCLOSURE
Size: MegaTOOLS®
Type: Aluminum
Cooling: Convection ventilation
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +40°C (32° to 104°F)
Storage Temperature: “40° to +70°C (“40° to 158°F)
Humidity: 10% to 90%, RHL non“condensing
ACCESSORIES
Included: Power adapter, rubber feet, mounting bracket
PRODUCT DIMENSIONS
18.75cm x 14.50cm x 2.54cm (7.38" x 5.71" x 1.00" ) W, D, H
PRODUCT WEIGHT
1.1kg (2.4lbs) approx.
SHIPPING DIMENSIONS
35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H
SHIPPING WEIGHT
1.7kg (3.8lbs) approx.
VP427X1 is a highperformance autoswitcher/scaler receiver with 1 HDBaseT inputs and a local HDMI input for 4K HDMI„ over extendedreach HDBaseT. It supports automatic and manual glitchfree switching between the inputs, and up or downscaling to any resolution up to 4K@60Hz (4:4:4). The output scaling automatically matches the resolution of the HDMI display on the output, or it can be manually set by the user. VP427X1 enables extending video signals up to 180m over CAT copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions.
Comprehensive Receiver/Scaler ” Scales signals of all standard resolutions to any resolution, up to 4K@60Hz (4:4:4), for routing to the HDMI output. Constant output sync prevents signal disruption when switching between inputs and when no video is detected.
HDMI Signal Extension ” HDCP 1.4 / 2.2. 4K60, CEC, xvYCC color (on input).
Audio De“embedding ” Analog balanced stereo output for de“embedding the audio to speakers.
Data Tunneling ” Extend RS“232, IR, and Ethernet over the HDBaseT line.
Built“in Automated Control ” Includes easy connection to occupancy sensors and contact closure switches.
CEC Support ” Supports passing of CEC from input to output. Automatically sends CEC commands to shut down the output display after a timeout period when no input signal is found and to power up the display when the input returns.
Cost“Effective and Convenient Control Options ” Ethernet and RS“232 serial ports, and local control via front panel input selection and OSD menu buttons.
ProcAmp Control ” Contrast, brightness, color, etc.
Convenient Unit Control and Configuration Options ” Local control via front panel source switching buttons and OSD menu. Distance control via RS“232 serial commands transmitted by a PC, touch screen system or other serial controllers.
Easy, Cost“effective Maintenance ” Local firmware upgrade via USB connector.
Easy and Elegant Installation ” Single cable connectivity for both HDBaseT signals and power. Compact MegaTOOLS„ fan“less enclosure for dropped“ceiling mounting, or side“by“side mounting of 2 units in a 1U rack space with the recommended rack adapter.
###
INPUTS
1 HDBaseT: On an RJ“45 connector
1 HDMI: On a female HDMI connector
OUTPUTS
1 HDMI: On a female HDMI connector
1 Balanced Analog Stereo Audio: On a 5“pin terminal block
PORTS
1 IR (IN/OUT): On 3.5mm mini jacks
1 RS“232: On a 3“pin terminal block
1 Ethernet: 100Mbps, on an RJ“45 connector
VIDEO
Output Resolutions: 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x768@60Hz, 1280x800@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1200@60Hz RB, 2560x1600@60Hz RB, 1920x1080@60Hz, 1280x720@60Hz, 2048x1080@50/60Hz, 2560x1440@60Hz RB, 720x480p@60Hz, 720x576p@50Hz, 1280x720p@50/60Hz, 1920x1080p@24/25/30/50/60Hz, 2560x1080p@50/60Hz, 2K@24/25/30/50/60Hz, 4K@24/25/30/50/60Hz
Max. Range: 180m at 1080p@60Hz, 100m (328ft) at 4K@60Hz (4:2:0)
Latency: Up to 2 frames
Content Protection: HDCP 2.2/1.4
Switching Time Between Inputs: <2.5 seconds
USER INTERFACE
Control: Input selection buttons, and remote contact“closure switches. Kramer API via RS“232 serial commands transmitted by a PC, touch screen system or other serial controller, embedded web pages via LAN for configuration and control
Indicators: Power, link, input selection LEDs
POWER
Source: PoE or 12V DC
Consumption: 1.5A
ENCLOSURE
Size: MegaTOOLS®
Type: Aluminum
Cooling: Convection ventilation
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +40°C (32° to 104°F)
Storage Temperature: “40° to +70°C (“40° to 158°F)
Humidity: 10% to 90%, RHL non“condensing
ACCESSORIES
Included: Power adapter, rubber feet, mounting bracket
PRODUCT DIMENSIONS
18.75cm x 14.50cm x 2.54cm (7.38" x 5.71" x 1.00" ) W, D, H
PRODUCT WEIGHT
1.1kg (2.4lbs) approx.
SHIPPING DIMENSIONS
35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H
SHIPPING WEIGHT
1.8kg (4.0lbs) approx.
676R is a highperformance HDMI fiber receiver for ultrareach extension of 4K@60Hz (4:4:4) HDMI signals. 676R receives the transmitted optical signal from a compatible transmitter and converts it to an HDMI and RS232 signals. 676R includes a multimode SFP+ transceiver, but can be used with any Kramer certified SFP+ transceiver, such as a singlemode SFP+ transceiver.
High Performance Standard Fiber Extender ” HDMI fiber receiver for providing ultra“reach signals over either multi“mode or single“mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi“mode SFP+ included). Near“zero latency video chroma sub“sampling conversion technology, is employed to auto“adapt above 10G HDMI signals to 10G optical link signal data“rate.Note: To ensure specified performance, support, and warranty of this product, use only Kramer's certified hi“performance OSP SFP+ pluggable optical units.
Multi“drop Signal Distribution ” Use optical splitters to extend the input signals from a single transmitter to multiple receivers, for displaying the same content on multiple display devices using optical splitting only, with no need for AV distribution amplifiers.
HDMI Signal Extension ” HDCP 2.2 compliant and supports up to 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS“HD as specified in HDMI 2.0.
Power Saving ” With CEC ON/OFF function, shut down a display device automatically when not in use, and auto power it ON upon presentation start.
I“EDIDPro„ Kramer Intelligent EDID Processing„ ” Intelligent EDID handling, processing and pass“through algorithm that ensures Plug and Play operation for HDMI source and display systems.
Bidirectional RS“232 Extension ” Serial interface data flows in both directions, to enable data transmission and control of devices.
Cost“Effective Maintenance ” Status LED indicators for power, source, sink and fiber link connections detection facilitate easy local troubleshooting.
Easy Installation ” DigiTOOLS® rack mountable fan“less enclosure enables side“by“side mounting of 3 units in a 1U rack space with the recommended rack adapter.
Top of Form
APPLICATIONS
Highly secured and ultra“long extension of controllable AV signals for: governmental, medical, and rental and staging applications.
Point“to“multipoint optical distribution of controllable AV signals over large spaces.
Multipoint“to“multipoint optical distribution of controllable AV signals over large spaces using Kramer modular matrices.
Ultra“long signals extension for multi“room and inter“building connectivity.
###
INPUTS
Fiber Optic: On LC connector(s)
OUTPUTS
HDMI: On a female HDMI connector
PORTS
RS-232: On a 3“pin terminal block connector
USB: On a female micro USB connector for firmware upgrade
VIDEO
Max Bandwidth: 18Gbps
Max Resolution: 4096x2160@60Hz 4K@60 (4:4:4)
Compliance: HDMI 2.0 and HDCP 2.2
EXTENSION LINE
Optical Fiber: Multi“mode (MM) or single“mode (SM)
Optical Module: Kramer 10Gbps SFP+ IEEE 802.3ae compliant modules (MM is included)
MULTI-MODE LINE
Compliance: G.651.1 OFNR fiber
Max Reach over OM3 MM Fiber: 3km (1.8 miles)
SINGLE-MODE LINE
Compliance: G.652D OFNR fiber
Max Reach over OS1 SM Fiber: 33km (20.5 miles)
EXTENDED RS-232
Baud Rate: 300 to 115200
USER INTERFACE
Indicators: Source detection, sink detection, optical link and power LEDs
Controls: Reset button
POWER
Consumption: 380mA
Source: 12V DC, 2A
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +40°C (32° to 104°F)
Storage Temperature: “40° to +70°C (“40° to 158°F)
Humidity: 10% to 90%, RHL non“condensing
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
Safety: CE, UL
Environmental: RoHs, WEEE
ENCLOSURE
Size: Tool
Type: Aluminum
Cooling: Convection ventilation
ACCESSORIES
Included: MM SFP+ transceiver, power adapter, power cord, mounting bracket set
PRODUCT DIMENSIONS
12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
PRODUCT WEIGHT
0.2kg (0.5lbs) approx.
SHIPPING DIMENSIONS
49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H
SHIPPING WEIGHT
0.7kg (1.6lbs) approx.
676T is a highperformance HDMI fiber transmitter for ultrareach extension of 4K@60Hz (4:4:4) HDMI signals. 676T converts the HDMI and RS232 input signal to an optical signal that is transmitted over a fiber optic cable to a compatible receiver that converts it back to HDMI and RS232 signals. 676T includes a multimode SFP+ transceiver, but can be used with any Kramer certified SFP+ transceiver, such as a singlemode SFP+ transceiver.
High Performance Standard Fiber Extender ” HDMI fiber transmitter for providing ultra“reach signals over either multi“mode or single“mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi“mode SFP+ included). Near“zero latency video chroma sub“sampling conversion technology, is employed to auto“adapt above 10G HDMI signals to 10G optical link signal data“rate.Note: To ensure specified performance, support, and warranty of this product, use only Kramer's certified hi“performance OSP SFP+ pluggable optical units.
Multi“drop Signal Distribution ” Use optical splitters to extend the input signals from a single transmitter to multiple receivers, for displaying the same content on multiple display devices using optical splitting only, with no need for AV distribution amplifiers.
HDMI Signal Extension ” HDCP 2.2 compliant and supports up to 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS“HD as specified in HDMI 2.0.
Power Saving ” With CEC ON/OFF function, shut down a display device automatically when not in use, and auto power it ON upon presentation start.
I“EDIDPro„ Kramer Intelligent EDID Processing„ ” Intelligent EDID handling, processing and pass“through algorithm that ensures Plug and Play operation for HDMI source and display systems.
Bidirectional RS“232 Extension ” Serial interface data flows in both directions, to enable data transmission and control of devices.
Cost“Effective Maintenance ” Status LED indicators for power, source, sink and fiber link connections detection facilitate easy local troubleshooting.
Easy Installation ” DigiTOOLS® rack mountable fan“less enclosure enables side“by“side mounting of 3 units in a 1U rack space with the recommended rack adapter.
Top of Form
APPLICATIONS
Highly secured and ultra“long extension of controllable AV signals for: governmental, medical, and rental and staging applications.
Point“to“multipoint optical distribution of controllable AV signals over large spaces.
Multipoint“to“multipoint optical distribution of controllable AV signals over large spaces using Kramer modular matrices.
Ultra“long signals extension for multi“room and inter“building connectivity.
###
INPUTS
HDMI: On a female HDMI connector
OUTPUTS
Fiber Optic: On LC connector(s)
PORTS
RS-232: On a 3“pin terminal block connector
USB: On a female micro USB connector for firmware upgrade
VIDEO
Max Bandwidth: 18Gbps
Max Resolution: 4096x2160@60Hz 4K@60 (4:4:4)
Compliance: HDMI 2.0 and HDCP 2.2
EXTENSION LINE
Optical Fiber: Multi“mode (MM) or single“mode (SM)
Optical Module: Kramer 10Gbps SFP+ IEEE 802.3ae compliant modules (MM is included)
MULTI-MODE LINE
Compliance: G.651.1 OFNR fiber
Max Reach over OM3 MM Fiber: 3km (1.8 miles)
SINGLE-MODE LINE
Compliance: G.652D OFNR fiber
Max Reach over OS1 SM Fiber: 33km (20.5 miles)
EXTENDED RS-232
Baud Rate: 300 to 115200
USER INTERFACE
Indicators: Source detection, sink detection, optical link and power LEDs
Controls: Reset button
POWER
Consumption: 480mA
Source: 12V DC, 2A
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +40°C (32° to 104°F)
Storage Temperature: “40° to +70°C (“40° to 158°F)
Humidity: 10% to 90%, RHL non“condensing
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
Safety: CE, UL
Environmental: RoHs, WEEE
ENCLOSURE
Size: Tool
Type: Aluminum
Cooling: Convection ventilation
ACCESSORIES
Included: MM SFP+ transceiver, power adapter, power cord, mounting bracket set
PRODUCT DIMENSIONS
12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
PRODUCT WEIGHT
0.2kg (0.5lbs) approx.
SHIPPING DIMENSIONS
49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H
SHIPPING WEIGHT
0.7kg (1.6lbs) approx.
KDSUSB2DEC is a USB 2.0 highspeed decoder for extending USB signals between a host computer and any USB peripheral device such as a mouse, keyboard, display, camera, mobile device, media player, or hard drive. Connect up to 4 USB devices to KDSUSB2DEC to enable communication with the host computer connected to a KDSUSB2EN encoder (sold separately).KDSUSB2DEC can be paired with one KDSUSB2EN encoder for basic onetoone USB extension, but with the purchase of additional units, you can diversify your USB extension system. For example, connect USB cameras in multiple locations to one computer or enable users in multiple locations to collaborate using the same host computer over a Local Area Network (LAN), in real time, using their own keyboards, mice and touch screens. Using Kramer's cloudbased control platform, you can map and/or control these multiunit setups.
High“Speed Extension ” Extends USB 2.0 signals up to 100 m with CAT 5e/6/7 cables, and up to 10km with fiber optics cable. Achieves USB 2.0 throughput up to 480 Mbps point“to“point or over LAN.Note: Use recommended Kramer cables for best performance.
Extend Multiple Devices ” Connect to all 4 decoder ports simultaneously with 5 Volts, 500 mA available on each port.
Collaboration ” Pair up to seven decoders to one encoder/host computer for extended, multi“location collaboration.
SwitchableUSB„ ” Construct one“to“many and many“to“many unit setups using Kramer's cloud“based control platform to manage the mapping and switch the connections.
Reliable and Certified ” Passes all key USB“IF compliance tests and FCC/CE Class B certified.
True Plug and Play ” No software drivers required.
Compatibility ” Works with all major operating systems including Windows®, macOS„ and Linux®.
Top of Form
APPLICATIONS
Meeting rooms
Training facilities
Collaborative classrooms
Lecture halls
Control Rooms
Any space where USB 2.0 peripheral devices are required
###
PORTS
4 USB: On USB type A connectors
1 CAT 5/6: On an RJ“45 connector
EXTENSION LINE
Direct Connect: Up to 100m (330 ft) over solid core Cat 5e/6/7 cable
Network Connect: Up to 100m (330 ft) between switches over solid core CAT 5e/6/7 cable (One local to seven remote pairings supported for Simultaneous Users Interaction)
Note: For best performance use recommended Kramer cables
GENERAL
Maximum Throughputs: USB 2.0 ” Up to 480 Mbps*
Maximum Throughputs: USB 1.1 ” Up to 12 Mbps
Traffic Types: All USB 2.0 and 1.1 Traffic Types (Control, Interrupt, Isochronous and Bulk)
Device Types: All USB 2.0 and 1.1 Device Types and Classes
Maximum Number of Connected USB Devices: 30
Networking Standards: 1000BASE“T
Networking Data Traffic: Layer 2
Networking Control Traffic: Layer 3
USER INTERFACE
Controls: Front panel pairing button
Indicators: Power, link, host, activity LEDs
POWER
Source: 24V DC adapter
Consumption: 780mA
ENCLOSURE
Type: Black anodized aluminum
Cooling: Convection ventilation
ACCESSORIES
Included: 1 Power adapter
PRODUCT DIMENSIONS
9.50cm x 8.00cm x 2.54cm (3.74" x 3.15" x 1.00" ) W, D, H
PRODUCT WEIGHT
0.2kg (0.4lbs) approx.
SHIPPING DIMENSIONS
23.20cm x 13.50cm x 9.80cm (9.13" x 5.31" x 3.86" ) W, D, H
SHIPPING WEIGHT
0.9kg (1.9lbs) approx.
KDSUSB2 is a USB 2.0 highspeed extension kit for extending USB signals between a host computer and any USB peripheral device such as a mouse, keyboard, display, camera, mobile device, media player, or hard drive. The KDSUSB2 encoder connects to a host computer enabling communication with the USB devices that are connected to the KDSUSB2 decoder.KDSUSB2 includes one encoder and one decoder for basic onetoone USB extension, but with the purchase of additional units, you can diversify your USB extension system. For example, connect USB cameras in multiple locations to one computer or enable users in multiple locations to collaborate using the same host computer over a Local Area Network (LAN), in real time, using their own keyboards, mice and touch screens. Using Kramer's cloudbased control platform, you can map and/or control these multiunit setups.
High“Speed Extension ” Extends USB 2.0 signals up to 100 m with CAT 5e/6/7 cables, and up to 10km with fiber optics cable. Achieves USB 2.0 throughput up to 480 Mbps point“to“point or over LAN.Note: Use recommended Kramer cables for best performance.
Extend Multiple Devices ” Connect to all 4 decoder ports simultaneously with 5 Volts, 500 mA available on each port.
Collaboration ” Pair up to seven decoders to one encoder/host computer for extended, multi“location collaboration.
SwitchableUSB„ ” Construct one“to“many and many“to“many unit setups using Kramer's cloud“based control platform to manage the mapping and switch the connections.
Reliable and Certified ” Passes all key USB“IF compliance tests and FCC/CE Class B certified.
True Plug and Play ” No software drivers required.
Compatibility ” Works with all major operating systems including Windows®, macOS„ and Linux®.
###
PORTS
Encoder
1 USB: On a USB type B connector for host computer
1 CAT 5/6: On an RJ“45 connector
Decoder
4 USB: On USB type A connectors
1 CAT 5/6: On an RJ“45 connector
EXTENSION LINE
Direct Connect: Up to 100m (330 ft) over solid core Cat 5e/6/7 cable
Network Connect: Up to 100m (330 ft) between switches over solid core CAT 5e/6/7 cable (One local to seven remote pairings supported for Simultaneous Users Interaction)
Note: For best performance use recommended Kramer cables
GENERAL
Maximum Throughputs: USB 2.0 ” Up to 480 Mbps*
Maximum Throughputs: USB 1.1 ” Up to 12 Mbps
Traffic Types: All USB 2.0 and 1.1 Traffic Types (Control, Interrupt, Isochronous and Bulk)
Device Types: All USB 2.0 and 1.1 Device Types and Classes
Maximum Number of Connected USB Devices: 30
Networking Standards: 1000BASE“T
Networking Data Traffic: Layer 2
Networking Control Traffic: Layer 3
USER INTERFACE
Controls: Front panel pairing button
Indicators: Power, link, host, activity LEDs
POWER
Encoder Source: Host computer
Decoder Source: 24V DC adapter
Consumption: 780mA
ENCLOSURE
Type: Black anodized aluminum
Cooling: Convection ventilation
ACCESSORIES
Included: 1 Power adapter, 1 USB2 type A male to type B male cable
PRODUCT DIMENSIONS
18.75cm x 16.00cm x 2.54cm (7.38" x 6.30" x 1.00" ) W, D, H
PRODUCT WEIGHT
0.4kg (0.8lbs) approx.
SHIPPING DIMENSIONS
35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H
SHIPPING WEIGHT
1.2kg (2.6lbs) approx.
KDSUSB2EN is a USB 2.0 highspeed encoder for extending USB signals between a host computer and any USB peripheral device such as a mouse, keyboard, display, camera, mobile device, media player, or hard drive. KDSUSB2EN connects to a host computer enabling communication with the USB devices that are connected to a KDSUSB2DEC decoder (sold separately).KDSUSB2EN can be paired with one KDSUSB2DEC decoder for basic onetoone USB extension, but with the purchase of additional units, you can diversify your USB extension system. For example, connect USB cameras in multiple locations to one computer or enable users in multiple locations to collaborate using the same host computer over a Local Area Network (LAN), in real time, using their own keyboards, mice and touch screens. Using Kramer's cloudbased control platform, you can map and/or control these multiunit setups.
High“Speed Extension ” Extends USB 2.0 signals up to 100 m with CAT 5e/6/7 cables, and up to 10km with fiber optics cable. Achieves USB 2.0 throughput up to 480 Mbps point“to“point or over LAN.Note: Use recommended Kramer cables for best performance.
Extend Multiple Devices ” Connect to all 4 decoder (sold separately) ports simultaneously with 5 Volts, 500 mA available on each port.
Collaboration ” Pair up to seven decoders (sold separately) to one encoder/host computer for extended, multi“location collaboration.
SwitchableUSB„ ” Construct one“to“many and many“to“many unit setups using Kramer's cloud“based control platform to manage the mapping and switch the connections.
Reliable and Certified ” Passes all key USB“IF compliance tests and FCC/CE Class B certified.
True Plug and Play ” No software drivers required.
###
PORTS
1 USB: On a USB type B connector for host computer
1 CAT 5/6: On an RJ“45 connector
EXTENSION LINE
Direct Connect: Up to 100m (330 ft) over solid core Cat 5e/6/7 cable
Network Connect: Up to 100m (330 ft) between switches over solid core CAT 5e/6/7 cable (One local to seven remote pairings supported for Simultaneous Users Interaction)
Note: For best performance use recommended Kramer cables
GENERAL
Maximum Throughputs: USB 2.0 ” Up to 480 Mbps*
Maximum Throughputs: USB 1.1 ” Up to 12 Mbps
Traffic Types: All USB 2.0 and 1.1 Traffic Types (Control, Interrupt, Isochronous and Bulk)
Device Types: All USB 2.0 and 1.1 Device Types and Classes
Maximum Number of Connected USB Devices: 30
Networking Standards: 1000BASE“T
Networking Data Traffic: Layer 2
Networking Control Traffic: Layer 3
USER INTERFACE
Controls: Front panel pairing button
Indicators: Power, link, host, activity LEDs
POWER
Source: Host computer
Consumption: 780mA
ENCLOSURE
Type: Black anodized aluminum
Cooling: Convection ventilation
ACCESSORIES
Included: 1 USB2 type A male to type B male cable
PRODUCT DIMENSIONS
9.50cm x 8.00cm x 2.54cm (3.74" x 3.15" x 1.00" ) W, D, H
PRODUCT WEIGHT
0.2kg (0.4lbs) approx.
SHIPPING DIMENSIONS
49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H
SHIPPING WEIGHT
0.4kg (0.8lbs) approx.
KDS8MNGR SDVoE Manager is the solution for configuration and management of KDS8 and KDS8F deployments within the same network. Just install the unit into the same local network as the extenders (encoders and decoders) to easily define and configure channel routing selections (including video, audio, and a variety of control interface types) using the embedded web pages. Without the use of this centralized control unit, each encoder/decoder pair would only function in a pointtopoint capacity.Additionally, this unit supports controlling and configuring the matrix, video wall, and multiviewer modes of connected KDS8 devices. The settings of all connected encoder/decoder units, including IP configuration, compatibility settings, and extender status are clearly displayed and easily managed in the embedded web pages.
Centralized Management ” Manage and configure multiple compatible KDS“8 devices through a single web interface. Control the independent routing of video, audio and control signals. Configure matrix, video wall, and multiviewer modes.
Customizable ” Create macros to further streamline and customize operation of the connected devices.
Status at“a“Glance ” Displays the status of all connected Transmitters and Receivers, including IP addresses, channel selections, and more.
Serial Control ” Generates serial commands to directly control an external serial“controlled device
Flexible Power ” Can be powered by Ethernet switches supporting the IEEE 802.3af 2003 PoE standard (optional).
Convenient Control Options ” Standard control is available via embedded web pages (remote or local), RS“232, and Telnet.
###
OUTPUTS
1 HDMI: On an HDMI connector to view current status information and access the embedded web pages without a PC
PORTS
1 RS-232: On a 3“pin Terminal Block for device control
1 RS-232: 5“pin Terminal Block) for control extension
8 Trigger: On a 10“pin terminal block
POWER
Source: 5V/4A DC
Consumption: 1.4A
PoE Budget: 25W (not including cable loss)
ENCLOSURE
Material: Steel
Color: Black
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0ËšC ” 40ËšC/32ËšF ” 104ËšF
Storage Temperature: “20ËšC ” 60ËšC/“4ËšF ” 140ËšF
Relative Humidity: 20 ” 90% RH (Non“condensing)
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
Regulatory Certification: CE
PRODUCT DIMENSIONS
10.80cm x 23.10cm x 2.50cm (4.25" x 9.09" x 0.98" ) W, D, H
PRODUCT WEIGHT
0.7kg (1.4lbs) approx.
SHIPPING DIMENSIONS
38.20cm x 18.80cm x 6.00cm (15.04" x 7.40" x 2.36" ) W, D, H
SHIPPING WEIGHT
1.2kg (2.5lbs) approx.
KDS10 is an advanced, dual stream transceiver for streaming 4K@60Hz (4:4:4) video signals via Ethernet over copper cable. KDS10 can be set as either an encoder or decoder. As an encoder, it encodes and streams one or two HDMI inputs over an IP network. As a decoder, it receives the encoded signal, decodes it and outputs it to an HDMI output.
Advanced Video Streaming Transceiver ” Streams up to 4K@60Hz (4:4:4) resolution signals over a 1G network interface, when streaming one source and 4K@30Hz (4:2:0) when streaming two sources.
Multi“Standard Video Coding ” Configure the transceivers according to your needs to stream using either H.264 or H.265.
Flexible Input and Output Options ” Includes two HDMI inputs that can be streamed alternately or simultaneously.
Streaming Support ” Unicast and multicast over RTP (Real“Time Protocol).
Flexible Analog Audio Embedding and De“embedding ” When in encoding mode, you can select the balanced analog audio input to embed into the streaming HDMI output signal. When in decoding mode, you can extract the HDMI audio signal and output it as balanced analog audio.
Convenient and Comprehensive Control ” Control the unit using intuitive embedded web pages or Protocol 3000 API commands via Ethernet.
Simple System Management ” Remote system management support to enable quick and efficient remote system and device life“cycle management.
###
INPUTS
2 HDMI: On female HDMI connectors
OUTPUTS
1 HDMI: On a female HDMI connector
PORTS
1 Ethernet: On an R“J45 connector
1 Balanced Audio: On a 5“pin terminal block connector
Serial USB: On a mini USB connector
VIDEO
Compression Standard: H.264 or H.265
Max Resolution “ One Stream: 4K@60Hz (4:4:4)
Max Resolution “ Two Simultaneous Streams: 4K@60Hz (4:2:0)
USER INTERFACE
Indicators: Link and power LEDs
Controls: Restart and factory reset front panel buttons, API, embedded web pages, and RTSP via Ethernet, API commands via serial USB
POWER
Source: 12V DC
Consumption: 20.4W
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non“condensing
Storage Temperature: “20 to +70°C (“4 to + 158 °F), 10% to 90%, non“condensing
Humidity: 10% to 90%, non“condensing
PRODUCT DIMENSIONS
14.30cm x 12.20cm x 4.36cm (5.63" x 4.80" x 1.72" ) W, D, H
PRODUCT WEIGHT
0.5kg (1.1lbs) approx.
SHIPPING DIMENSIONS
31.90cm x 16.50cm x 6.70cm (12.56" x 6.50" x 2.64" ) W, D, H
SHIPPING WEIGHT
1.0kg (2.3lbs) approx.
KDS7MNGR Manager is the solution for configuration and management of KDS7 deployments within the same network. Simply install the unit into the same local network as the extenders (encoders and decoders) to easily define and configure channel routing selections (including video, audio, and a variety of control interface types) using the embedded web pages.
Additionally, this unit supports controlling and configuring the matrix, video wall, and KVM modes of connected KDS7 devices as well as device grouping and group operations.
The settings of all connected encoder/decoder units, including IP configuration, compatibility settings, and extender status are clearly displayed and easily updated.
Outstanding end“user experience ”
Instant auto“discovery and status with preview
Access via Remote Web UI or using local monitor with a USB keyboard and mouse
Ideal for multiple device deployments ”
Manages 120 encoders and decoders
Configuration of Virtual Video Matrix, KVM, and Video Walls
Configuration of Device Grouping, Preset Definition, and Activation via UI or APIs
Configuration ” FW for single or group of devices
Robust security ”
Enterprise IT“grade security ” 802.1x and HTTPS/TLS
Security certification ” OWASP Top 10 certificate
Can be deployed in the same LAN used for AV data streaming or in a separate LAN
Simple planning and rollout ”
Cost“effective from day one
Full product range for any site, any application
Plug“and“play with Netgear M4250 AVoIP switches, Kramer Control, KDS“USB2, etc.
APPLICATIONS
For real“time essential installations such as command and control rooms
For large scale AV content sharing installations using existing wires and infrastructure in corporate offices and government applications
AV distribution systems with one or more sources and many displays in schools, universities, and public venues
For AV installations where low latency KM/KVM capabilities are required
###
OUTPUTS
1 HDMI: On a female HDMI connector
PORTS
1 Ethernet: On RJ45 connector
2 USB: On USB“A connectors
VIDEO
Max Resolution: 1080P@60Hz
VIDEO STREAMING
Compression Standard: JPEG2K based, proprietary stream
Max Input Resolution: 4K@60hz (4:2:0)
Max Output Resolution: 4K@30hz (4:4:4)
Max End-to-End Resolution: 4K@30hz (4:4:4) + HDR 10bit
Scaler: Yes
End-to-End Latency: 33msec
Switching Time: 1sec
USER INTERFACE
Indicators: LINK, NET and ON LEDs, front panel LCD Display
Controls: Restart and factory reset rear panel button, embedded web pages, P3K API commands via Ethernet, front panel navigation buttons
POWER
PoE (Power over Ethernet): 37V to 57V, max power 13W
Optional power supply: 24V DC, 5A
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non“condensing
Storage Temperature: “20 to +70°C (“4 to + 158 °F), 10% to 90%, non“condensing
Humidity: 10% to 90%, non“condensing
PRODUCT DIMENSIONS
18.90cm x 14.50cm x 2.76cm (7.44" x 5.71" x 1.09" ) W, D, H
PRODUCT WEIGHT
0.7kg (1.5lbs) approx.
SHIPPING DIMENSIONS
31.20cm x 17.90cm x 7.60cm (12.28" x 7.05" x 2.99" ) W, D, H
SHIPPING WEIGHT
0.9kg (2.1lbs) approx.
WPDEC7 is an advanced decoder for streaming 4K video signals via Ethernet over copper cable.
Video Streaming Receiver ” Streams up to 4K@60Hz (4:2:0) resolution signals over a 1G network interface.
Streaming Support ” Unicast and multicast.
Analog Audio De“Embedding Output ” Extract the HDMI audio or LAN streaming audio and output it as balanced analog audio.
Convenient and Comprehensive Control ” Control the unit using intuitive embedded web pages, Protocol 3000 API commands via Ethernet or front panel LCD and buttons.
Control Gateway ” Through P3K or special TCP connection, user could control/communicate with RS232 and CEC to the connected devices.
Video Wall ” Up to 16x16 size.
PoE Support ” Option to power with PoE connection from a PoE switch
Top of Form
APPLICATIONS
For real“time essential installations such as command and control rooms
For large scale AV content sharing installations using existing wires and infrastructure in corporate offices and government applications
AV distribution systems with one or more sources and many displays in schools, universities, and public venues
For AV installations where low latency KM/KVM capabilities are required
###
OUTPUTS
1 HDMI: On a female HDMI connector
PORTS
2 Ethernet: On RJ“45 connectors
1 Balanced Audio: On a 5“pin terminal block connector
1 RS-232: On a 3“pin terminal block connector
NETWORK
Multicast: Through RTSP (Real Time Streaming Protocol): IGMP snooping non“blocking, Layer 2
Unicast: Through RTSP (Real Time Streaming Protocol)
Bitrate: Peak: 850Mbps, 4K average: 350Mbps, 1080p average: 250Mbps
VIDEO
Compression Standard: JPEG based, private stream
Max Resolution: 4K@30Hz 4:4:4
VIDEO STREAMING
Compression Standard: JPEG2K based, proprietary stream
Max Input Resolution: 4K@60hz (4:2:0)
Max Output Resolution: 4K@30hz (4:4:4)
Max End-to-End Resolution: 4K@30hz (4:4:4)
Scaler: Yes
End-to-End Latency: 33msec
Switching Time: 1sec
RESOLUTION
4096x2160@60Hz, 1600x1200@60Hz, 1280x960@60Hz, 848x480@60Hz,
3840x2160@60Hz, 1600x900@60Hz, 1280x800@60Hz, 800x600@60Hz,
1920x1200@50Hz, 1440x900@60Hz, 1280x768@60Hz, 720x576@60Hz,
1920x1080@60Hz, 1400x1050@60Hz, 1280x720@60Hz, 720x480@50Hz,
1856x1392@60Hz, 1366x768@60Hz, 1224x768@70Hz, 640x480@60Hz,
1792x1344@60Hz, 1360x768@60Hz, 1152x864@70Hz, 640x400@85Hz,
1680x1050@60Hz, 1024x768@60Hz, 640x350@85Hz
AUDIO
Supported Formats: LPCM, Dolby and DTS
LPCM: LPCM upto 7.1/24“bit/192kHz
Dolby: Dolby AtmosTM, Dolby TrueHD, Dolby Digital PlusTM, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0
DTS: DTS“HD Master AudioTM, DTS“HD, DTS“ES Discrete 6.1, DTS“ES Matrix 6.1, DTS Digital Surround 5.1
SECURITY
HTTPS, 802.1x, OWASP“10, AES“128 encryption of AV streaming with changeable key
USER INTERFACE
Indicators: HDMI and ON LEDs, front panel LCD Display
Recessed Buttons: CH+/CH ” and factory reset
Controls: Embedded web pages, P3K API commands via Ethernet
POWER
PoE (Power over Ethernet): 37V to 57V, maximum power consumption 12W
Optional power supply: 20V DC, 6A Max
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +45°C (32° to 113°F)
Storage Temperature: “20° to +70°C (“4° to 158°F)
Humidity: 10% to 90%, RHL non“condensing
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
Safety: CE, FCC
Environmental: RoHs, WEEE
ENCLOSURE
Size: 2“gang
Type: Metal (SGCC)
Cooling: Convection ventilation
PRODUCT DIMENSIONS
US: 12.10cm x 4.56cm x 12.10cm (4.76" x 1.80" x 4.76" ) W, D, H
UK: 15.10cm x 4.00cm x 8.60cm (5.94" x 1.57" x 3.39" ) W, D, H
PRODUCT WEIGHT
US: 0.4kg (0.9lbs) approx.
UK: 0.4kg (0.9lbs) approx.
SHIPPING DIMENSIONS
US: 20.00cm x 13.70cm x 7.50cm (7.87" x 5.39" x 2.95" ) W, D, H
UK: 23.80cm x 13.70cm x 7.50cm (9.37" x 5.39" x 2.95" ) W, D, H
SHIPPING WEIGHT
US: 0.6kg (1.3lbs) approx.
UK: 0.7kg (1.4lbs) approx.
KDSDEC7 decoder is an advanced receiver for streaming 4K video signals via Ethernet over copper cable. It decodes streams over an IP network to HDMI output, and transmit the USB, IR, RS232, or CEC signal over IP network.
Outstanding end“user experience ”
Rich set of inputs and interfaces
Easy“to“use KM/KVM ” Searchable OSD Menu for KM and fully configurable KVM roaming
Large scale video wall ” up to 16x16
Instantaneous switching time ” 1 second
Ideal for large“scale deployments ”
Highly scalable ” 999 channels build in support
State of the art management device
Rich set of management capabilities ” Standard P3K Open API , LCD screen for configuration
Robust security ”
Enterprise IT“grade security ” 802.1x and HTTPS/TLS
Security certification ” OWASP Top 10 certificate
Separate ETH ports for optimal security and experience
New HW architecture that enables robust FW update
Simple planning and rollout: ”
Cost“effective from day one
Full product range for any site, any application
Plug“and“play with Netgear M4250 AVoIP switches, Kramer Control, KDS“USB2, etc.
PoE Support ”
Using PoE switch ” up to 13W consumption
Alternative sources/destinations ”
HDMI Loop“Through on Encoder and HDMI Input on Decoder
Analog Audio ”
Embedding and De“embedding
Control gateway ”
Through P3K control/communicate with IR, RS232, or CEC to the connected devices
APPLICATIONS
For real“time essential installations such as command and control rooms
For large scale AV content sharing installations using existing wires and infrastructure in corporate offices and government applications
AV distribution systems with one or more sources and many displays in schools, universities, and public venues
For AV installations where low latency KM/KVM capabilities are required
###
INPUTS
1 HDMI: On a female HDMI connector
OUTPUTS
1 HDMI: On a female HDMI connector
PORTS
2 Ethernets: On R“J45 connectors
1 Balanced Audio: On a 5“pin terminal block connector
1 RS-232: On a 3“pin terminal block connector
1 IR: On a 3.5mm TRS connector
2 USB: On USB“A connectors
NETWORK
Multicast: Through RTSP (Real Time Streaming Protocol): IGMP snooping non“blocking, Layer 2
Unicast: Through RTSP (Real Time Streaming Protocol)
Bitrate: Peak: 850Mbps, 4K average: 350Mbps, 1080p average: 250Mbps
VIDEO
Compression Standard: JPEG based, private stream
Max Resolution: 4K@30Hz 4:4:4
VIDEO STREAMING
Compression Standard: JPEG2K based, proprietary stream
Max Input Resolution: 4K@60hz (4:2:0)
Max Output Resolution: 4K@30hz (4:4:4)
Max End-to-End Resolution: 4K@30hz (4:4:4)
Scaler: Yes
End-to-End Latency: 33msec
Switching Time: 1sec
RESOLUTION
4096x2160@60Hz, 1600x1200@60Hz, 1280x960@60Hz, 848x480@60Hz,
3840x2160@60Hz, 1600x900@60Hz, 1280x800@60Hz, 800x600@60Hz,
1920x1200@50Hz, 1440x900@60Hz, 1280x768@60Hz, 720x576@60Hz,
1920x1080@60Hz, 1400x1050@60Hz, 1280x720@60Hz, 720x480@50Hz,
1856x1392@60Hz, 1366x768@60Hz, 1224x768@70Hz, 640x480@60Hz,
1792x1344@60Hz, 1360x768@60Hz, 1152x864@70Hz, 640x400@85Hz,
1680x1050@60Hz, 1024x768@60Hz, 640x350@85Hz
AUDIO
Supported Formats: LPCM, Dolby and DTS
LPCM: LPCM upto 7.1/24“bit/192kHz
Dolby: Dolby AtmosTM, Dolby TrueHD, Dolby Digital PlusTM, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0
DTS: DTS“HD Master AudioTM, DTS“HD, DTS“ES Discrete 6.1, DTS“ES Matrix 6.1, DTS Digital Surround 5.1
SECURITY
HTTPS, 802.1x, OWASP“10, AES“128 encryption of AV streaming with changeable key
USER INTERFACE
Indicators: LINK, NET and ON LEDs, front panel LCD Display
Controls: Restart and factory reset rear panel button, embedded web pages, P3K API commands via Ethernet, front panel navigation buttons
POWER
PoE (Power over Ethernet): 37V to 57V, max power 13W
Optional power supply: 24V DC, 5A
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non“condensing
Storage Temperature: “20 to +70°C (“4 to + 158 °F), 10% to 90%, non“condensing
Humidity: 10% to 90%, non“condensing
PRODUCT DIMENSIONS
18.90cm x 14.50cm x 2.76cm (7.44" x 5.71" x 1.09" ) W, D, H
PRODUCT WEIGHT
0.7kg (1.5lbs) approx.
SHIPPING DIMENSIONS
31.20cm x 17.90cm x 7.60cm (12.28" x 7.05" x 2.99" ) W, D, H
SHIPPING WEIGHT
0.9kg (2.1lbs) approx.
WPSW2EN7 is an advanced wall plate encoder for streaming 4K video signals via Ethernet over copper cable.
Video Streaming Transmitter ” Streams up to 4K@60Hz (4:2:0) resolution signals over a 1G network interface.
Streaming Support ” Unicast and multicast.
Multiple Inputs ” One HDMI input and one USB“C input, which support multiple switching policy including Last connected, Priority and Manually.
Analog Audio Embedding ” Embed the unbalanced analog audio into the streaming and HDMI output signal.
Convenient and Comprehensive Control ” Control the unit using intuitive web interface, protocol 3000 API commands via Ethernet, or front panel LCD and navigation buttons.
Control Gateway ” Through P3K or special TCP connection, user can control/communicate with RS232, CEC to the connected devices.
PoE Support ” Option to power with PoE connection from a PoE switch.
Top of Form
APPLICATIONS
For real“time essential installations such as command and control rooms
For large scale AV content sharing installations using existing wires and infrastructure in corporate offices and government applications
AV distribution systems with one or more sources and many displays in schools, universities, and public venues
For AV installations where low latency KM/KVM capabilities are required
###
INPUTS
1 HDMI: On a female HDMI connector
1 USB: On a USB“C connector
1 Audio: On a female 3.5mm mini jack
PORTS
2 Ethernet: On RJ“45 female connectors
1 RS-232: On a 3“pin terminal block connector
NETWORK
Multicast: Through RTSP (Real Time Streaming Protocol): IGMP snooping non“blocking, Layer 2
Unicast: Through RTSP (Real Time Streaming Protocol)
Bitrate: Peak: 850Mbps, 4K average: 350Mbps, 1080p average: 250Mbps
VIDEO
Compression Standard: JPEG based, private stream
Max Resolution: 4K@30Hz 4:4:4
VIDEO STREAMING
Compression Standard: JPEG2K based, proprietary stream
Max Input Resolution: 4K@60hz (4:2:0)
Max Output Resolution: 4K@30hz (4:4:4)
Max End-to-End Resolution: 4K@30hz (4:4:4)
Scaler: Yes
End-to-End Latency: 33msec
Switching Time: 1sec
RESOLUTION
4096x2160@60Hz, 1600x1200@60Hz, 1280x960@60Hz, 848x480@60Hz,
3840x2160@60Hz, 1600x900@60Hz, 1280x800@60Hz, 800x600@60Hz,
1920x1200@50Hz, 1440x900@60Hz, 1280x768@60Hz, 720x576@60Hz,
1920x1080@60Hz, 1400x1050@60Hz, 1280x720@60Hz, 720x480@50Hz,
1856x1392@60Hz, 1366x768@60Hz, 1224x768@70Hz, 640x480@60Hz,
1792x1344@60Hz, 1360x768@60Hz, 1152x864@70Hz, 640x400@85Hz,
1680x1050@60Hz, 1024x768@60Hz, 640x350@85Hz
AUDIO
Supported Formats: LPCM, Dolby and DTS
LPCM: LPCM upto 7.1/24“bit/192kHz
Dolby: Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0
DTS: DTS“HD Master Audio, DTS“HD, DTS“ES Discrete 6.1, DTS“ES Matrix 6.1, DTS Digital Surround 5.1
SECURITY
HTTPS, 802.1x, OWASP“10, AES“128 encryption of AV streaming with changeable key
USER INTERFACE
Indicators: HDMI, USB and ON LEDs, front panel channel display
Recessed Buttons: CH+, CH ” and factory reset button
POWER
PoE (Power over Ethernet): 37V to 57V, maximum power consumption 12W
Optional Power Supply: 20V DC, 6A Max
Consumption when using Optional Power Supply: 68W (with USB“C charging)
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0° to +45°C (32° to 113°F)
Storage Temperature: “20° to +70°C (“4° to 158°F)
Humidity: 10% to 90%, RHL non“condensing
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
Safety: CE, FCC
Environmental: RoHs, WEEE
ENCLOSURE
Size: 2 Gang
Type: SGCC (galvanized steel) and PC (polycarbonate)
Cooling: Convection Ventilation
PRODUCT DIMENSIONS
US: 12.10cm x 4.56cm x 12.10cm (4.76" x 1.80" x 4.76" ) W, D, H
UK: 15.10cm x 4.00cm x 8.60cm (5.94" x 1.57" x 3.39" ) W, D, H
PRODUCT WEIGHT
US: 0.4kg (1.0lbs) approx.
UK: 0.4kg (0.9lbs) approx.
KDSSW2EN7 autoswitch encoder with HDMI and USBC inputs.
Outstanding end“user experience ”
1 HDMI and 1 USB“C with charging capabilities for laptop
Easy“to“use KM/KVM ” Searchable OSD Menu for KM and fully configurable KVM roaming
Large scale video wall ” up to 16x16
Instantaneous switching time ” 1 second
Ideal for large“scale deployments ”
Highly scalable ” 999 channels build in support
State of the art management device
Rich set of management capabilities ” Standard P3K Open API , LCD screen for configuration
Robust security ”
Cost“effective from day one
Full product range for any site, any application
Plug“and“play with Netgear M4250 AVoIP switches, Kramer Control, KDS“USB2, etc.
Simple planning and rollout ”
Cost“effective from day one
Full product range for any site, any application
Plug“and“play with Netgear M4250 AVoIP switches, Kramer Control, KDS“USB2, etc.
APPLICATIONS
For real“time essential installations such as command and control rooms
For large scale AV content sharing installations using existing wires and infrastructure in corporate offices and government applications
AV distribution systems with one or more sources and many displays in schools, universities, and public venues
For AV installations where low latency KM/KVM capabilities are required
###
INPUTS
1 HDMI: On female HDMI connectors
1 USB-C: On a female USB“C connector
OUTPUTS
1 HDMI: On a female HDMI connector
PORTS
2 Ethernet: On R“J45 connectors
1 Balanced Audio: On a 5“pin terminal block connector
1 RS-232: On a 3“pin terminal block connector
1 IR: On a 3.5mm TRS connector
1 USB Host: On a USB“B connector
2 USB Device: On USB“A connectors
NETWORK
Multicast: Through RTSP (Real Time Streaming Protocol): IGMP snooping non“blocking, Layer 2
Unicast: Through RTSP (Real Time Streaming Protocol)
Bit Rate: Peak: 850Mbps, 4K average: 350Mbps, 1080p average: 250Mbps
VIDEO
Compression Standard: JPEG based, private stream
Max Resolution: 4K@30Hz 4:4:4
HDR 10: Up to 4K30 4:2:2 12 bit
VIDEO STREAMING
Compression Standard: JPEG2K based, proprietary stream
Max Input Resolution: 4K@60hz (4:2:0)
Max Output Resolution: 4K@30hz (4:4:4)
Max End-to-End Resolution: 4K@30hz (4:4:4)
Scaler: Yes
End-to-End Latency: 33msec
Switching Time: 1sec
RESOLUTION
4096x2160@60Hz, 1600x1200@60Hz, 1280x960@60Hz, 848x480@60Hz,
3840x2160@60Hz, 1600x900@60Hz, 1280x800@60Hz, 800x600@60Hz,
1920x1200@50Hz, 1440x900@60Hz, 1280x768@60Hz, 720x576@60Hz,
1920x1080@60Hz, 1400x1050@60Hz, 1280x720@60Hz, 720x480@50Hz,
1856x1392@60Hz, 1366x768@60Hz, 1224x768@70Hz, 640x480@60Hz,
1792x1344@60Hz, 1360x768@60Hz, 1152x864@70Hz, 640x400@85Hz,
1680x1050@60Hz, 1024x768@60Hz, 640x350@85Hz
AUDIO
Supported Formats: LPCM, Dolby and DTS
LPCM: LPCM upto 7.1/24“bit/192kHz
Dolby: Dolby AtmosTM, Dolby TrueHD, Dolby Digital PlusTM, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0
DTS: DTS“HD Master AudioTM, DTS“HD, DTS“ES Discrete 6.1, DTS“ES Matrix 6.1, DTS Digital Surround 5.1
SECURITY
HTTPS, 802.1x, OWASP“10, AES“128 encryption of AV streaming with changeable key
USER INTERFACE
Indicators: LINK, NET and ON LEDs, front panel LCD Display
Controls: Restart and factory reset rear panel button, embedded web pages, P3K API commands via Ethernet, front panel navigation buttons
POWER
PoE (Power over Ethernet): 37V to 57V, maximum power consumption 19W (when USB at full load)
Optional power supply: 24V DC, 5A, max power 68W with USB“C charging
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non“condensing
Storage Temperature: “20 to +70°C (“4 to + 158 °F), 10% to 90%, non“condensing
Humidity: 10% to 90%, non“condensing
PRODUCT DIMENSIONS
18.90cm x 14.50cm x 2.76cm (7.44" x 5.71" x 1.09" ) W, D, H
PRODUCT WEIGHT
0.7kg (1.5lbs) approx.
SHIPPING DIMENSIONS
31.20cm x 17.90cm x 7.60cm (12.28" x 7.05" x 2.99" ) W, D, H
SHIPPING WEIGHT
0.9kg (2.1lbs) approx.
KDSSW3EN7 is an auto switcher and advanced encoder for streaming a selected video signal at 4K via Ethernet over copper cable in unicast (onetoone) or multicast (onetomany) configurations. It can add digital audio Dante, USB, IR, RS232, or CEC signals.
KDS“SW3“EN7 provides exceptional quality, advanced user“friendly operation, and flexible control.
Instantaneous Switching Time ” 1 second switching time between selectable video inputs.
Video Streaming Transmitter ” Streams up to 4K@60Hz (4:2:0) resolution signals over a 1G network interface. While KDS“DEC7 decodes the stream to 4K@30Hz (4:4:4) resolution.
Streaming delay 33msec ” for video 4K@30Hz 4:4:4 signal.
Streaming Support ” Provides unicast and multicast streaming.
Flexible Analog Audio Embedding and De“embedding ” Select balanced analog audio as input to embed into the streaming and HDMI„ output signal, or as output to extract the HDMI audio signal and output it as balanced analog audio.
Flexible Digital Audio Embedding and De“embedding Dante ” Select digital audio as input to embed into the streaming and HDMI„ output signal, or as output to extract the HDMI audio signal and output it as balanced analog audio.
Easy To Use KM/KVM Support ” Searchable, OSD menu for KM and fully configurable KVM roaming.
Power consumption without USB“C Power Delivery is 13W ” power consumption with USB“C Power Delivery is 77W (requiring the optional power supply).
Convenient and Comprehensive Control ” Control the unit using intuitive embedded web pages, Protocol 3000 API commands via Ethernet, or front panel LCD and navigation buttons.
PoE Support ” Powered with PoE connection from PoE LAN switch.
Control Gateway ” Through P3K or special TCP connection, users can control/communicate with IR, RS“232, or CEC to the connected devices.
Separate Service LAN Port ” can be used for physical separation between AV and command streams to separate LAN for security and reliability purposes.
Selectable Inputs ” 2 HDMI and 1 USB“C input.
Analog/Digital audio inputs and outputs.
Plug“and“play with Netgear M4250 AVoIP switches, Kramer Control, and KDS“USB2.
Top of Form
APPLICATIONS
For real“time essential installations such as command and control rooms
For large scale AV content sharing installations using existing wires and infrastructure in corporate offices and government applications
AV distribution systems with one or more sources and many displays in schools, universities, and public venues
For AV installations where low latency KM/KVM capabilities are required
KDSEN7 encoder is an advanced transmitter for streaming 4K video signals via Ethernet over copper cable. It encodes and streams over an IP network from HDMI input, and transmits the USB, IR, RS232, or CEC signal over IP network.
Outstanding end“user experience ”
Rich set of inputs and interfaces
Easy“to“use KM/KVM ” Searchable OSD Menu for KM and fully configurable KVM roaming
Large scale video wall ” up to 16x16
Instantaneous switching time ” 1 second
Ideal for large“scale deployments ”
Highly scalable ” 999 channels build in support
State of the art management device
Rich set of management capabilities ” Standard P3K Open API , LCD screen for configuration
Robust security ”
Enterprise IT“grade security ” 802.1x and HTTPS/TLS
Security certification ” OWASP Top 10 certificate
Separate ETH ports for optimal security and experience
New HW architecture that enables robust FW update
Simple planning and rollout: ”
Cost“effective from day one
Full product range for any site, any application
Plug“and“play with Netgear M4250 AVoIP switches, Kramer Control, KDS“USB2, etc.
PoE Support ”
Using PoE switch ” up to 13W consumption
Alternative sources/destinations ”
HDMI Loop“Through on Encoder and HDMI Input on Decoder
Analog Audio ”
Embedding and De“embedding
Control gateway ” Through P3K control/communicate with IR, RS232, or CEC to the connected devices
Through P3K control/communicate with IR, RS232, or CEC to the connected devices
Top of Form
APPLICATIONS
For real“time essential installations such as command and control rooms
For large scale AV content sharing installations using existing wires and infrastructure in corporate offices and government applications
AV distribution systems with one or more sources and many displays in schools, universities, and public venues
For AV installations where low latency KM/KVM capabilities are required
###
INPUTS
1 HDMI: On a female HDMI connector
OUTPUTS
1 HDMI: On a female HDMI connector
PORTS
2 Ethernets: On RJ“45 connectors
1 Balanced Audio: On a 5“pin terminal block connector
1 RS-232: On a 3“pin terminal block connector
1 IR: On a 3.5mm TRS connector
1 USB Host: On a USB“B connector
NETWORK
Multicast: Through RTSP (Real Time Streaming Protocol): IGMP snooping non“blocking, Layer 2
Unicast: Through RTSP (Real Time Streaming Protocol)
Bitrate: Peak: 850Mbps, 4K average: 350Mbps, 1080p average: 250Mbps
VIDEO
Compression Standard: JPEG based, private stream
Max Resolution: 4K@30Hz 4:4:4
VIDEO STREAMING
Compression Standard: JPEG2K based, proprietary stream
Max Input Resolution: 4K@60hz (4:2:0)
Max Output Resolution: 4K@30hz (4:4:4)
Max End-to-End Resolution: 4K@30hz (4:4:4)
Scaler: Yes
End-to-End Latency: 33msec
Switching Time: 1sec
RESOLUTION
4096x2160@60Hz, 1600x1200@60Hz, 1280x960@60Hz, 848x480@60Hz,
3840x2160@60Hz, 1600x900@60Hz, 1280x800@60Hz, 800x600@60Hz,
1920x1200@50Hz, 1440x900@60Hz, 1280x768@60Hz, 720x576@60Hz,
1920x1080@60Hz, 1400x1050@60Hz, 1280x720@60Hz, 720x480@50Hz,
1856x1392@60Hz, 1366x768@60Hz, 1224x768@70Hz, 640x480@60Hz,
1792x1344@60Hz, 1360x768@60Hz, 1152x864@70Hz, 640x400@85Hz,
1680x1050@60Hz, 1024x768@60Hz, 640x350@85Hz
AUDIO
Supported Formats: LPCM, Dolby, DTS
LPCM: LPCM upto 7.1/24“bit/192kHz
Dolby: Dolby AtmosTM, Dolby TrueHD, Dolby Digital PlusTM, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0
DTS: DTS“HD Master AudioTM, DTS“HD, DTS“ES Discrete 6.1, DTS“ES Matrix 6.1, DTS Digital Surround 5.1
SECURITY
HTTPS, 802.1x, OWASP“10, AES“128 encryption of AV streaming with changeable key
USER INTERFACE
Indicators: LINK, NET and ON LEDs, front panel LCD Display
Controls: Restart and factory reset rear panel button, embedded web pages, P3K API commands via Ethernet, front panel navigation buttons
POWER
PoE (Power over Ethernet): Operating voltage range 37V~57V, max power 13W
Optional power supply: 24V DC, 5A
ENVIRONMENTAL CONDITIONS
Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non“condensing
Storage Temperature: “20 to +70°C (“4 to + 158 °F), 10% to 90%, non“condensing
Humidity: 10% to 90%, non“condensing
PRODUCT DIMENSIONS
18.90cm x 14.50cm x 2.76cm (7.44" x 5.71" x 1.09" ) W, D, H
PRODUCT WEIGHT
0.7kg (1.5lbs) approx.
SHIPPING DIMENSIONS
31.20cm x 17.90cm x 7.60cm (12.28" x 7.05" x 2.99" ) W, D, H
SHIPPING WEIGHT
0.9kg (2.1lbs) approx.
PT3UC is an innovative active USB 3.1 extender that extends the USB cable distance between the host and the device by reclocking and equalizing the USB signal. Placing PT3U in the transmission path, removes dropout and digital noise (sparkles) in your installation that may result from using long USB cables.
True Plug & Play ” No additional driver program is needed.
USB 3.1 Super Speed (10Gbps) Standard ” Compliant with USB 3.1.
Video ALT mode
Backwards Compatible ” USB 3.0, 2.0, 1.1
external power supply.
Buffers incoming & outgoing signal.
Certifications ” CE, FCC, REACH, ROHS.
PT3U is an innovative active USB 3.0 extender that extends the USB cable distance between the host and the device by reclocking and equalizing the USB signal. Placing PT3U in the transmission path, removes dropout and digital noise (sparkles) in your installation that may result from using long USB cables.
True Plug & Play ” No additional driver program is needed.
USB 3.0 Super Speed (5Gbps) Standard ” Compliant with USB 3.0.
Backwards Compatible ” USB 2.0, 1.1
Optional external power supply.
Buffers incoming & outgoing signal.
Certifications ” CE, FCC, REACH, ROHS.
WP2UT/RKIT is a comprehensive, extendedreach CAT extender kit for USB 2.0, RS232 and 2way powering over twisted pair. WP2UT/RKIT includes a wallplate transmitter and compact, mountable receiver. The WP2UT wallplate transmitter converts the USB input signal into a CAT signal. The PT2UR receiver converts the transmitted CAT signal into a USB signal.
Comprehensive USB Extender ” Plug & play USB extender kit for providing extended“reach CAT signals and 2“way power over twisted pair copper infrastructures. A local USB host is auto“connected to remote“connected USB devices employing either interrupt, bulk or isochronous USB 2.0 standard data transfer communication.
Flexible USB Connectivity ” Wide Variety of USB peripheral devices can be extended including cameras, touch screens, smart boards, hard drives, game controllers, audio devices, printers, scanners, or HID (Human Interface Devices) devices such as a mouse or keyboard. Dual role and OTG (On The Go ) devices such as smart phones and tablets, connected either to a transmitter“side USB host port or receiver“side USB device port, can communication with a remote host or peripheral pairing device.
Remote USB Charging ” Fast USB charging of peripheral devices when the receiver is powered by a power supply, and standard USB charging when the receiver is powered by the transmitter via CAT.
Bidirectional RS“232 Extension ” Serial interface data flows in both directions, allowing data transmission and device control.
Cost“Effective Maintenance ” Status LED indicators facilitate easy local maintenance and troubleshooting.
Easy Installation ” Single twisted“pair cable for signal and power wiring, the extender kit installation is fast and cost“effective. Transmitter compactly fits into standard US 1“gang in“wall box size, or podium and in“table mounting accessories. Receiver is a compact PicoTOOLS® fan“less enclosure for easy device“adjacent mounting, or side“by“side mounting of 4 units in a 1U rack space with the recommended rack adapter. Compact and flexibly mountable extender kit supports simple decorative integration with room design.
Top of Form
APPLICATIONS
Online and hybrid learning in classrooms and training facilities.
Room camera and soundbar extension in online conference and meeting rooms.
Any hi“quality USB 2.0 extension in education, corporate, manufacturing and medical applications.
###
INPUTS
1 CAT: On an RJ“45 female connector for extension line (PT“2UR)
OUTPUTS
1 CAT: On an RJ“45 female connector for extension line (WP“2UT)
PORTS
1 USB: On a USB“B female connector for USB host extension (WP“2UT)
4 USB: On USB“A female connectors for USB devices extension (PT“2UR)
1 RS“232: On a 3“pin terminal block connector for serial link extension
EXTENDED USB
Data Rate: Up to 480Mbps
Transmitted Data Bandwidth: Up to 300Mbps
Standards Compliance: USB 1.1 and 2.0
EXTENSION LINE
Reach Using Shielded UNIKAT Cables: Up to 100m (330ft)
Reach Using CAT 5e Cables: Up to 30m (100ft)
Baud Rate: 9600
PT-2UR USB CHARGING
Max Total Current When PSU“Powered:2.5A
Max Current Per Port When PSU“Powered:2A
Max Total/Per“port Current When PoC“Powered:0.5A
USER INTERFACE
Indicators: LINK and ON LEDs
POWER
Source: 12V DC, 2A
WP2UT Consumption: 1.1A
PT2UR Consumption: 1.85A
ENCLOSURE
Transmitter Size: 1“gang US
Receiver Size: PicoTools®
Type: Aluminum
Cooling: Convection ventilation
ACCESSORIES
Included: 1 12V power“supply, 1 C“USB/AB“6 USB type“A male to USB type“B male 2m cable, US 1“gang, white wall“plate frame and faceplate, 1 bracket set
STANDARDS COMPLIANCE
CE, FCC
PRODUCT DIMENSIONS
6.98cm x 3.10cm x 11.43cm (2.75" x 1.22" x 4.50" ) W, D, H
PRODUCT WEIGHT
0.3kg (0.7lbs) approx.
SHIPPING DIMENSIONS
23.20cm x 13.60cm x 10.00cm (9.13" x 5.35" x 3.94" ) W, D, H
SHIPPING WEIGHT
0.6kg (1.3lbs) approx.