Converter & Distributie
-
KRAMER Kramer FC-22ETH - 2-port Serial Control Gateway
The FC22ETH is an Ethernet control gateway, capable of plug and play deployment over customer Ethernet LAN for remote control of customer controlled devices via bidirectional RS232 or RS485 serial control connections. Multiple control clients can be IPconnected to the FC22ETH control gateway for concurrent control of two RS232 or RS485 controllable devices, such as AV scalers, video displays, and audio amplifiers. 1 RS“485 or RS“232 Selectable Bidirectional Control Port ” Controls a device via bi“directional serial control protocols. 1 RS“232 Bidirectional Control Port ” Controls a device via bidirectional RS“232 serial control protocols. 1 Ethernet Control Port ” Remote protocol“based control port. Built“in Web Pages ” Remote browser“based control and support. Simultaneous IP Control Communication ” With up to 40 IP control clients. Mini USB Port ” For firmware upgrades and local technical services. Easy Installation ” Plug & play IP auto“setup deployment for simple and cost“reducing installation. Top of Form APPLICATIONS Remote IP control of serial controlled devices K“Touch multi“clients IP room control LAN“based expansion of K“Config control system ### PORTS 1 RS“232/RS“485 selectable and 1 RS“232 serial on 3“pin terminal blocks, 1 Ethernet on an RJ“45 connector, 1 mini USB connector for local services SUPPORTED SERIAL PORT BAUD RATES 1200, 2400, 4800, 9600, 19200, 38400, 57600, 15200bps RS-232 COMMUNICATION Transparent up to 115200bps MAXIMUM DATA HANDLING OF DEVICE Up to 150kbps summed on all ports CONTROLS Serial Select button, RS“485 terminator switch, DHCP and Factory Default buttons INDICATORS Power, Ethernet, Serial 1, Serial I/O, and DHCP status LEDs POWER CONSUMPTION 5V DC, 200mA OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing COOLING Convection ENCLOSURE TYPE Aluminum INCLUDED ACCESSORIES Power adapter VIBRATION ISTA 1A in carton (International Safe Transit Association) SAFETY REGULATORY COMPLIANCE CE ENVIRONMENTAL REGULATORY COMPLIANCE Complies with appropriate requirements of RoHs and WEEE PRODUCT DIMENSIONS 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H PRODUCT WEIGHT 0.2kg (0.4lbs) approx. SHIPPING DIMENSIONS 49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H SHIPPING WEIGHT 0.4kg (0.9lbs) approx.
€393,00
-
KRAMER Kramer SL-28032-Port Master / Room Controller
The SL280 is a master/space controller (Kramer Control brain) that can operate over Ethernet with control interfaces that include: eight bidirectional RS232, eight IR, eight GPI/O, and eight relays. It controls devices such as scalers, video displays, audio amplifiers, Bluray players, sensors, screens, shades, door locks, and lights. Multiple Kramer Ethernet control gateways can be used to add remote I/O ports. Space Controller ” Controls any AV device/display with its corresponding logic. High Performance Architecture ” Enables a scalable and flexible programming platform. 8 RS“232 Bidirectional Control Ports ” For controlling devices via bi“directional serial control protocols. 8 IR Emitter & 1 IR Receiver Control Ports ” Control devices via IR control protocols and learn commands from IR remotes. 8 GPI/O Control Ports ” Control devices via general purpose I/O ports, program configured as digital input, digital output or analog input interface for controlling sensors, door locks, audio volume and lighting control devices. 8 Relay Control Ports ” Control devices via relay contact closure, such as opening and closing drapes, shades, blinds, and projection screen scrolling. Network Support ” 10/100/1000Mbps Ethernet. LED Indicators ” I/O port state and system status. Software Management Support ” Kramer Control, API. Top of Form APPLICATIONS Controls small to large spaces for commercial, education and government sectors ### BIDIRECTIONAL PORTS 8 RS“232 serial on 3“pin terminal blocks, 8 GPI/O on 2“pin terminal blocks, 1 Ethernet on a RJ“45 connector, 1 micro“USB connector for sending P3K commands and performing a firmware upgrade INPUTS 1 built“in IR sensor (for learning) OUTPUTS 8 IR out and 8 relays on 2“pin terminal block connectors INDICATORS LED indicator for each port and function PROCESSOR SPEED 1GHz MEMORY 512MB RAM, 4GB Flash POWER CONSUMPTION 100“240V AC, 200mA INCLUDED ACCESSORIES Power supply PRODUCT DIMENSIONS 19" x 7.20 x 1U (43.6cm x 18.30cm x 4.36cm) W, D, H PRODUCT WEIGHT 1.7kg (3.6lbs) approx. SHIPPING DIMENSIONS 55.00cm x 27.60cm x 10.70cm (21.65" x 10.87" x 4.21" ) W, D, H SHIPPING WEIGHT 2.6kg (5.7lbs) approx.
€2.136,00 €1.816,00
-
KRAMER Kramer SL-240C - Compact 16-Port Master / Room Controller with PoE
SL240C is a compact master/space controller (Kramer Control brain) with PoE. It can operate over Ethernet with control interfaces that include: four bidirectional RS232, four IR, four GPI/O, and four relays. It controls devices such as scalers, video displays, audio amplifiers, Bluray players, sensors, screens, shades, door locks, and lights. Multiple Kramer Ethernet control gateways can be used to add remote I/O ports. Space Controller ” Controls any AV device/display with its corresponding logic. High Performance Architecture ” Enables a scalable and flexible programming platform. 4 RS“232 Bidirectional Control Ports ” For controlling devices via bi“directional serial control protocols. 4 IR Emitter & 1 IR Receiver Control Ports ” Control devices via IR control protocols and learn commands from IR remotes. 4 GPI/O Control Ports ” Control devices via general purpose I/O ports, program configured as digital input, digital output or analog input interface for controlling sensors, door locks, audio volume and lighting control devices. 4 Relay Control Ports ” Control devices via relay contact closure, such as opening and closing drapes, shades, blinds, and projection screen scrolling. Resilient powering with PoE and optional PSU (not included). Network Support ” 10/100/1000Mbps Ethernet. LED Indicators ” I/O port state and system status. Software Management Support ” Kramer Control, API. Top of Form APPLICATIONS Controls small to large spaces for commercial, education and government sectors. ### BIDIRECTIONAL PORTS 4 RS“232 serial on 3“pin terminal blocks, 4 GPI/O on 2“pin terminal blocks, 1 Ethernet on a RJ“45 connector, 1 mini“USB connector for firmware upgrade INPUTS 1 built“in IR sensor (for learning) OUTPUTS 4 IR out and 4 relays on 2“pin terminal block connectors INDICATORS LED indicator for each port and function PROCESSOR SPEED 1GHz MEMORY 512MB RAM, 4GB Flash POWER CONSUMPTION 5V DC, 2A POWER SOURCE PoE (for extra power resiliency, connect to the optional 5V DC power supply) PRODUCT DIMENSIONS 19.00cm x 11.60cm x 2.70cm (7.48" x 4.57" x 1.06" ) W, D, H PRODUCT WEIGHT 0.4kg (1.0lbs) approx. SHIPPING DIMENSIONS 34.50cm x 16.50cm x 5.20cm (13.58" x 6.50" x 2.05" ) W, D, H SHIPPING WEIGHT 1.0kg (2.2lbs) approx.
€1.422,00 €1.209,00
-
KRAMER Kramer SL-1N - 7-port Serial, IR, and Relay, Ethernet Room Controller
The SL1N is a master room controller that can operate over Ethernet (LAN) with control ports that include two bidirectional RS232, two IR and three relay. It controls devices such as scalers, video displays, audio amplifiers, DVD players, sensors, screens, shades, door locks, and lights. Multiple Kramer Ethernet gateways can be used to add remote I/O ports.The SL1N includes a KNET„ connector interface which enables access to the master controller from auxiliary room controllers such as control keypads. The SL1N can also provide power to auxiliary room controllers via the KNET„ connectors. 1 Ethernet Port ” Connector for IP“enabled devices and control gateways for adding remote I/O ports 1 K“NET„ Connector ” Enables communication between the master controller and auxiliary room controllers such as control keypads K“NET„ Single Link Connection ” Enables a single connection for both power and control to auxiliary controllers 2 RS“232 Bi“directional Control Ports ” Serial control protocol for compatible devices 2 IR Emitter Control Ports ” Infrared control for compatible devices 3 Relay Control Ports ” Contact closure control for actions such as rolling up and down screens, drapes, shades, and blinds Simultaneous IP Control Communication ” With up to 15 IP control clients. Kramer K“Config„ Compatible ” Intuitive Windows“based configuration application for fast and easy design of room control systems Kramer Site“CTRL„ Compatible ” Remote customer site control and management over customer's IP network IR Sensor and IR Input Ports ” Learn commands from IR remotes Mini USB Port ” For firmware upgrades of technical services ### BIDIRECTIONAL PORTS 2 RS“232 serial on 3“pin terminal blocks, 1 K“NET on 4“pin terminal block connector, 1 Ethernet on an RJ“45 connector, 1 Mini USB connector for local programming services INPUTS 1 built“in IR sensor, 1 IR“in on 3.5mm mini“jack (for learning) OUTPUTS 2 IR“out and 3 relays (36V AC or DC, 2A, 60VAC maximum on non“inductive load) on 2“pin terminal block connectors INDICATORS LED indicator for each port and function POWER CONSUMPTION 12V DC, 180mA OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing INCLUDED ACCESSORIES Power supply PRODUCT DIMENSIONS 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H PRODUCT WEIGHT 0.2kg (0.4lbs) approx. SHIPPING DIMENSIONS 49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H SHIPPING WEIGHT 0.5kg (1.2lbs) approx.
€418,00 €356,00
-
KRAMER Kramer VGAA-OUT8-F64 - 8-Channel VGA with Analog Audio Output Card
VGAAOUT2F64 is an eightchannel VGA with analog audio output card for the VS6464 Series Modular MultiFormat Digital Matrix Switchers. The VGAAOUT8F64 outputs eight VGA with analog audio signals from the chassis. Audio output is accessed by connecting the supplied Kramer VGA with audio cables to each VGA port. Max. Bandwidth ” 450MHz. HDTV Compatible. Analog Audio Over Breakaway Connector. ### PORTS 8 VGA on 15“pin HD connectors, 8 unbalanced analog audio on 3.5mm mini jack connectors (accessible via C GF/GMAF“30 cables) BANDWIDTH 450MHz MAXIMUM RANGE 10m (32ft) POWER CONSUMPTION 20W OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing SAFETY REGULATORY COMPLIANCE CE ENVIRONMENTAL REGULATORY COMPLIANCE Complies with appropriate requirements of RoHs and WEEE INCLUDED ACCESSORIES 8 C“GF/GMAF“30 cables PRODUCT DIMENSIONS 39.50cm x 18.00cm x 2.00cm (15.55" x 7.09" x 0.79" ) W, D, H PRODUCT WEIGHT 0.7kg (1.4lbs) approx. SHIPPING DIMENSIONS 54.80cm x 27.50cm x 10.60cm (21.57" x 10.83" x 4.17" ) W, D, H SHIPPING WEIGHT 0.9kg (2.1lbs) approx.
€3.576,00 €3.040,00
-
KRAMER Kramer DGKat-OUT8-F64 - 8-Channel HDMI & RS-232 over DGKat Output Card
DGKatOUT8F64 is an eightchannel HDMI and RS232 over DGKat twisted pair output card for the VS6464 Series Modular MultiFormat Digital Matrix Switchers. The DGKatOUT8F64 outputs eight HDMI and RS232 signals from the chassis. Max. Data Rate ” 4.95Gbps. System Range ” Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables.Note: Transmission range depends on the signal resolution, graphics card and display used. If using third“party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly. HDMI and HDCP Compliant. DGKat„ Signal Integration. 3D Pass“Through. Bidirectional Local RS“232 Port. Kramer Equalization & re“Klocking Technology. Power Connect System ” For supplying power to compatible TP receivers. Top of Form APPLICATIONS Projection systems in conference rooms, boardrooms, auditoriums, hotels and churches, production studios ### OUTPUTS 8 TP ports on RJ“45 connectors, 8 serial ports on 3“pin terminal blocks BANDWIDTH PER CHANNEL Video: 1.65Gbps serial data: 19200 TOTAL BANDWIDTH Video: 4.95Gbps serial data: 19200 MAXIMUM RANGE 90m (300ft) ” 1080i@60Hz POWER CONSUMPTION 45W 3D PASS THROUGH Supported OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing STANDARD COMPLIANCE HDCP 1.4, HDMI 1.3a SAFETY REGULATORY COMPLIANCE CE, FCC ENVIRONMENTAL REGULATORY COMPLIANCE Complies with appropriate requirements of RoHs and WEEE INCLUDED ACCESSORIES Screwdriver PRODUCT DIMENSIONS 39.50cm x 18.00cm x 2.00cm (15.55" x 7.09" x 0.79" ) W, D, H PRODUCT WEIGHT 0.5kg (1.1lbs) approx. SHIPPING DIMENSIONS 47.70cm x 23.50cm x 4.80cm (18.78" x 9.25" x 1.89" ) W, D, H SHIPPING WEIGHT 0.8kg (1.8lbs) approx.
€2.983,00 €2.536,00
-
KRAMER Kramer HDCP-OUT8-F64 - 8-Channel DVI (HDCP) Output Card
HDCPOUT8F64 is an eightchannel HDMI over DVI (HDCP) output card for the VS6464 Series Modular MultiFormat Digital Matrix Switchers. The HDCPOUT8F64 outputs eight HDMI/HDCP signals from the chassis. Max. Data Rate ” 6.75Gbps (2.25Gbps per graphic channel). HDCP Compliant. HDMI Support. 3D Pass“Through. DVI Connectors. Top of Form APPLICATIONS Conference rooms Rental and staging ### OUTPUTS 8 DVI“D on DVI Molex 24“pin (F) connectors BANDWIDTH PER CHANNEL 2.25Gbps TOTAL BANDWIDTH 6.75Gbps POWER CONSUMPTION 23W 3D PASS THROUGH Supported OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing STANDARD COMPLIANCE HDCP, HDMI SAFETY REGULATORY COMPLIANCE CE, FCC ENVIRONMENTAL REGULATORY COMPLIANCE Complies with appropriate requirements of RoHs and WEEE PRODUCT DIMENSIONS 39.50cm x 18.00cm x 2.00cm (15.55" x 7.09" x 0.79" ) W, D, H PRODUCT WEIGHT 0.7kg (1.5lbs) approx. SHIPPING DIMENSIONS 47.70cm x 23.50cm x 4.80cm (18.78" x 9.25" x 1.89" ) W, D, H SHIPPING WEIGHT 1.0kg (2.1lbs) approx.
€2.239,00 €1.903,00
-
KRAMER Kramer VGAA-IN8-F64 - 8-Channel VGA with Analog Audio Input Card
VGAAIN8F64 is an eightchannel VGA with analog audio input card for the VS6464 Series Modular MultiFormat Digital Matrix Switchers. The VGAAIN8F64 inputs eight VGA with analog audio signals into the chassis. Audio is accessed by connecting the supplied Kramer VGA with audio cables to each VGA port. Max. Bandwidth ” 450MHz. HDTV Compatible. Analog Audio Over Breakaway Connector. ### PORTS 8 VGA on 15“pin HD connectors, 8 unbalanced analog audio on 3.5mm mini jack connectors (accessible via C GF/GMAF“30 cables) BANDWIDTH 450MHz MAXIMUM RANGE 10m (32ft) POWER CONSUMPTION 35W OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing SAFETY REGULATORY COMPLIANCE CE ENVIRONMENTAL REGULATORY COMPLIANCE Complies with appropriate requirements of RoHs and WEEE INCLUDED ACCESSORIES 8 C“GF/GMAF“30 cables PRODUCT DIMENSIONS 39.50cm x 18.00cm x 2.00cm (15.55" x 7.09" x 0.79" ) W, D, H PRODUCT WEIGHT 0.4kg (1.0lbs) approx. SHIPPING DIMENSIONS 54.80cm x 27.50cm x 10.60cm (21.57" x 10.83" x 4.17" ) W, D, H SHIPPING WEIGHT 0.8kg (1.7lbs) approx.
€6.709,00 €5.704,00
-
KRAMER Kramer DGKat-IN8-F64 - 8-Input HDMI & RS-232 over DGKat Card
DGKatIN8F64 is an eightchannel HDMI and RS232 over DGKat twisted pair input card for the VS6464 Series Modular MultiFormat Digital Matrix Switchers. The DGKatIN8F64 inputs four HDMI and RS232 signals to the chassis. Max. Data Rate ” 4.95Gbps. System Range ” Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables.Note: Transmission range depends on the signal resolution, graphics card and display used. If using third“party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly. HDMI and HDCP Compliant. DGKat„ Signal Integration. 3D Pass“Through. Bidirectional Local RS“232 Port. Kramer Equalization & re“Klocking Technology. Power Connect System ” For supplying power to compatible TP transmitters ### INPUTS 8 TP ports on RJ“45 connectors, 8 serial ports on 3“pin terminal blocks BANDWIDTH PER CHANNEL Video ” 1.65Gbps Serial Data ” 19200 TOTAL BANDWIDTH Video ” 4.95Gbps Serial Data ” 19200 MAXIMUM RANGE 90m (300ft) ” 1080i@60Hz POWER CONSUMPTION 45W 3D PASS THROUGH Supported STANDARDS COMPLIANCE HDCP 1.4, HDMI 1.3a OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing SAFETY REGULATORY COMPLIANCE CE, FCC ENVIRONMENTAL REGULATORY COMPLIANCE Complies with appropriate requirements of RoHs and WEEE PRODUCT DIMENSIONS 39.50cm x 18.00cm x 2.00cm (15.55" x 7.09" x 0.79" ) W, D, H PRODUCT WEIGHT 0.5kg (1.1lbs) approx. SHIPPING DIMENSIONS 47.70cm x 23.50cm x 4.80cm (18.78" x 9.25" x 1.89" ) W, D, H SHIPPING WEIGHT 0.8kg (1.8lbs) approx.
€3.576,00
-
KRAMER Kramer DVI-IN8-F64 - 8-Channel DVI Input Card
DVIIN8F64 is an eightchannel DVI input card for the VS6464 Series Modular MultiFormat Digital Matrix Switchers. The DVIIN8F64 inputs eight DVI signals into the chassis. Max. Data Rate ” 4.95Gbps (1.65Gbps per graphic channel). DVI Rev. 1.0. Top of Form APPLICATIONS Home theater, presentation and multimedia applications Rental and staging ### INPUTS 8 DVI“D on Molex 24“pin (F) connectors BANDWIDTH PER CHANNEL 1.65Gbps TOTAL BANDWIDTH 4.95Gbps MAXIMUM RANGE 15m (49ft) POWER CONSUMPTION 6W 3D PASS THROUGH Not supported OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing STANDARD COMPLIANCE DVI 1.0 SAFETY REGULATORY COMPLIANCE CE, FCC ENVIRONMENTAL REGULATORY COMPLIANCE Complies with appropriate requirements of RoHs and WEEE PRODUCT DIMENSIONS 39.50cm x 18.00cm x 2.00cm (15.55" x 7.09" x 0.79" ) W, D, H PRODUCT WEIGHT 0.4kg (0.9lbs) approx. SHIPPING DIMENSIONS 47.70cm x 23.50cm x 4.80cm (18.78" x 9.25" x 1.89" ) W, D, H SHIPPING WEIGHT 0.8kg (1.7lbs) approx.
€3.279,00 €2.788,00
-
KRAMER Kramer PS-1DN - Redundant Power Supply for VS-3232DN/VS-6464DN
The PS-1DN is a second (redundant) power supply for the VS-3232DN and the VS-6464DN Modular Multi-Format Digital Matrix Switchers. Hot“Swappable Power Supply ” No need to power the system down when replacing.
€1.779,00
-
KRAMER Kramer VGAA-OUT2-F16/F34 - 2-Channel VGA with Analog Audio Output Card
VGAAOUT2F16/F34 is a twochannel VGA with analog audio output card for the VS1616 or VS34FD Series Modular MultiFormat Digital Matrix Switchers. The VGAAOUT2F16/F34 outputs two VGA with analog audio signals from the chassis. Audio output is accessed by connecting the supplied Kramer VGA with audio cables to each VGA port. Max. Bandwidth ” 450MHz. HDTV Compatible. Analog Audio Over Breakaway Connector. ### PORTS 2 VGA on 15“pin HD connectors, 2 unbalanced analog audio on 3.5mm mini jack connectors (accessible via C GF/GMAF“30 cables) BANDWIDTH 450MHz MAXIMUM RANGE 10m (32ft) POWER CONSUMPTION 5.5W OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing SAFETY REGULATORY COMPLIANCE CE ENVIRONMENTAL REGULATORY COMPLIANCE Complies with appropriate requirements of RoHs and WEEE INCLUDED ACCESSORIES 2 C“GF/GMAF“30 cables PRODUCT DIMENSIONS 25.20cm x 13.00cm x 2.00cm (9.92" x 5.12" x 0.79" ) W, D, H PRODUCT WEIGHT 0.3kg (0.7lbs) approx. SHIPPING DIMENSIONS 16.50cm x 30.00cm x 6.00cm (6.50" x 11.81" x 2.36" ) W, D, H SHIPPING WEIGHT 0.5kg (1.0lbs) approx.
€1.337,00 €1.138,00
-
KRAMER Kramer F676-OUT2-F34 - 4K60 4:4:4 HDMI over Ultra-Reach MM/SM Fiber Optic Output Card
F676OUT2F34 is a highperformance HDMI fiber optic modular matrix output card for ultrareach extension of 4K@60Hz (4:4:4) HDMI signals. Designed for the VS34FD modular matrix, F676OUT2F34 converts HDMI and RS232 input signals to an optical signal that is transmitted over a fiber optic cable to a compatible receiver that converts it back to HDMI and RS232 signals. F676OUT2F34 includes a multimode SFP+ transceiver, but can be used with any Kramer certified SFP+ transceiver, such as a singlemode SFP+ transceiver. High Performance Standard Fiber Extender ” HDMI fiber transmitter for providing ultra“reach signals over either multi“mode or single“mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi“mode SFP+ included). Near“zero latency video chroma sub“sampling conversion technology, is employed to auto“adapt above 10G HDMI signals to 10G optical link signal data“rate.Note: To ensure specified performance, support, and warranty of this product, use only Kramer's certified hi“performance OSP SFP+ pluggable optical units. Multi“drop Signal Distribution ” Use optical splitters to extend the signals from the output to multiple compatible receivers, for displaying the same content on multiple display devices using optical splitting only, with no need for AV distribution amplifiers. HDMI Signal Extension ” HDCP 2.2 compliant and supports up to 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS“HD. I“EDIDPro„ Kramer Intelligent EDID Processing„ ” Intelligent EDID handling, processing and pass“through algorithm that ensures Plug and Play operation for HDMI source and display systems. Bidirectional RS“232 Extension ” Serial interface data flows in both directions, to enable data transmission and control of devices. Cost“Effective Maintenance ” Fiber link connection LEDs facilitate easy local troubleshooting. Top of Form APPLICATIONS Highly secured and ultra“long extension of controllable AV signals for: governmental, medical, and rental and staging applications. Point“to“multipoint optical distribution of controllable AV signals over large spaces. Multipoint“to“multipoint optical distribution of controllable AV signals over large spaces using Kramer modular matrices. Ultra“long signals extension for multi“room and inter“building connectivity. ### OUTPUTS 2 Fiber Optic: On LC connectors PORTS 2 RS-232: On a 3“pin terminal block connector VIDEO Max Bandwidth: 18Gbps Max Resolution: 4K@60Hz (4:4:4) HDMI Support: 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS“HD Content Protection: HDCP 2.2 EXTENSION LINE Optical Fiber: Multi“mode (MM) or single“mode (SM) Optical Module: Kramer 10Gbps SFP+ IEEE 802.3ae compliant modules (MM is included) MULTI-MODE LINE Compliance: G.651.1 OFNR fiber Max Reach over OM3 MM Fiber: 3km (1.8 miles) SINGLE-MODE LINE Compliance: G.652D OFNR fiber Max Reach over OS1 SM Fiber: 33km (20.5 miles) EXTENDED RS-232 Baud Rate: 300 to 115200 USER INTERFACE Indicators: Optical link LEDs POWER Consumption: 9W ENVIRONMENTAL CONDITIONS Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: “40° to +70°C (“40° to 158°F) Humidity: 10% to 90%, RHL non“condensing REGULATORY COMPLIANCE (STANDARDS COMPLIANCE) Safety: CE, UL Environmental: RoHs, WEEE ACCESSORIES Included: 2 MM SFP+ transceivers PRODUCT DIMENSIONS 25.50cm x 13.00cm x 2.00cm (10.04" x 5.12" x 0.79" ) W, D, H PRODUCT WEIGHT 0.2kg (0.5lbs) approx. SHIPPING DIMENSIONS 29.50cm x 16.60cm x 6.40cm (11.61" x 6.54" x 2.52" ) W, D, H SHIPPING WEIGHT 0.4kg (0.9lbs) approx.
€4.313,00 €3.668,00
-
KRAMER Kramer DTAxrD2-OUT2-F34 -2-Channel 4K HDR HDMI over HDBaseT 2.0 DSC Output Card with Analog Audio
DTAxrD2OUT2F34 is a twochannel, 4K@60Hz (4:4:4), DSC, HDMI, analog audio, bidirectional RS232, Ethernet, & IR over HDBaseT twisted pair transmitter card for compatible Kramer Modular MultiFormat Digital Matrix Switchers. DTAxrD2OUT2F34 outputs two extendedreach HDBaseT signals with selectable embedded/de“embedded analog audio, bidirectional RS232, IR, and Ethernet from the chassis to the line. Max. Data Rate ” 18Gbps (6Gbps per graphics channel), 10Gbps DSC over CAT cable. Max. Resolution ” 4K@60Hz (4:4:4). Analog Audio Embedding/De“embedding or ARC ” On the same jack. HDBaseT Technology ” HDTV compatible, HDCP 2.2/1.4 compliant. System Range ” Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables. Ethernet Extension ” Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control. Bidirectional RS“232 Extension: ” Serial interface data flows in both directions, allowing data transmission and device control. Bidirectional Infrared Extension: ” IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line. 3D Pass“Through. ### INPUTS 2 HDBaseT: On RJ“45 connectors PORTS 2 Unbalanced Audio: On a 6“pin terminal block connector 2 RS-232: On a 6“pin terminal block connector 2 IR: On a 4“pin terminal block 1 Ethernet: On an RJ“45 connector EXTENSION LINE Compression: Low“level standard DSC compression for signals above 4K@60 (4:2:0) 4K@60 (4:4:4) Range with Compression: Up to 100m (330ft) 4K@60 (42:0) Range with No Compression: Up to 100m (330ft) Full HD (1080p@60Hz) Range with No Compression: Up to 130m (430ft), Full HD (1080p@60Hz) Range in UltraLong Mode: Up to 180m (590ft) Compliance: HDBaseT 2.0 Note: Use Kramer shielded cables to achieve optimum extension ranges VIDEO Max Bandwidth with Compression: 17.95Gbps (5.98Gbps per graphic channel) Max Bandwidth with No Compression: 10.2Gbps (3.4Gbps per graphic channel) Max Resolution with Compression: 3840x2160@60Hz 4:4:4 24bpp Max Resolution with No Compression: 4096x2160@60Hz 4:2:0 24bpp Compliance: HDCP 2.2, HDR 10 EXTENDED ETHERNET Bandwidth: Up to 100Mbps EXTENDED RS-232 Baud Rate: 300 to 115200 POWER Consumption: 21.5W ENVIRONMENTAL CONDITIONS Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: “40° to +70°C (“40° to 158°F) Humidity: 10% to 90%, RHL non“condensing REGULATORY COMPLIANCE (STANDARDS COMPLIANCE) Safety: CE Environmental: Complies with appropriate requirements of RoHs and WEEE PRODUCT DIMENSIONS 25.00cm x 13.00cm x 2.00cm (9.84" x 5.12" x 0.79" ) W, D, H PRODUCT WEIGHT 0.2kg (0.5lbs) approx. SHIPPING DIMENSIONS 29.30cm x 16.50cm x 5.90cm (11.54" x 6.50" x 2.32" ) W, D, H SHIPPING WEIGHT 0.4kg (0.9lbs) approx.
€3.424,00 €2.911,00
-
KRAMER Kramer DTAxrC2-OUT2-F34 -2-Channel 4K HDR HDMI over HDBaseT Output Card with Analog Audio & PoE Provider
DTAxrC2OUT2F34 is a twochannel, 4K@60Hz (4:4:4), CSC, HDMI, analog audio, bidirectional RS232, Ethernet, & IR over HDBaseT twisted pair transmitter card for compatible Kramer Modular MultiFormat Digital Matrix Switchers. DTAxrC2OUT2F34 outputs two extendedreach HDBaseT signals with selectable embedded/de“embedded analog audio, bidirectional RS232, IR, and Ethernet from the chassis to the line. Max. Data Rate ” 18Gbps (6Gbps per graphics channel), 10Gbps CSC over CAT cable. Max. Resolution ” 4K@60Hz (4:4:4). Analog Audio Embedding/De“embedding or ARC ” On the same jack. HDBaseT Technology ” HDTV compatible, HDCP 2.2/1.4 compliant. System Range ” Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables. Ethernet Extension ” Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control. Bidirectional RS“232 Extension: ” Serial interface data flows in both directions, allowing data transmission and device control. Bidirectional Infrared Extension: ” IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line. 3D Pass“Through. PoE (Power over Ethernet) Enabled ” Provides PoE power to a connected device with the Kramer PoE Power Supply Add“On PS“4812 (sold separately). ### OUTPUTS 2 HDBaseT: On RJ“45 connectors PORTS 2 Unbalanced Audio: On a 6“pin terminal block connector 2 RS-232: On a 6“pin terminal block connector 2 IR: On a 4“pin terminal block 1 Ethernet: On an RJ“45 connector EXTENSION LINE Standard Compression: Up to 100m (330ft) at 4K@60Hz (4:4:4), 4K@60Hz (4:2:0) or 4K@30Hz (4:4:4) Up to 180m (590ft) at full HD (1080p @60Hz 24bpp) High Compression: Up to 100m (330ft) at 4K@60Hz (4:4:4), or 4K@60Hz (4:2:0) Up to 180m (590ft) at 4K@30Hz (4:4:4) Up to 200m (650ft) at full HD (1080p @60Hz 24bpp) No Compression: Up to 100m (330ft) at 4K@60Hz (4:2:0) Up to 180m (590ft) at full HD (1080p @60Hz 24bpp) Standards Compliance: HDBaseT 1.0 Note: When using recommended Kramer cables VIDEO Max Data Rate: Up to 18Gbps (6Gbps per graphic channel), 10Gbps CSC over CAT cable Standard Compression Max Resolution: 4096x2160@60Hz (4:4:4) 24bpp High Compression Max Resolution: 3840x2160@60Hz (4:4:4) 24bpp No-Compression Max Resolution: 4096x2160@60Hz (4:2:0) 24bpp Compliance: HDCP 2.2, HDR 10 HDMI Support: Deep color, x.v.Color„, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS“HD, 2K, 4K, and 3D as specified in HDMI 2.0 EXTENDED ETHERNET Bandwidth: Up to 100Mbps EXTENDED RS-232 Baud Rate: 300 to 115200 POWER Consumption: 21.5W ENVIRONMENTAL CONDITIONS Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: “40° to +70°C (“40° to 158°F) Humidity: 10% to 90%, RHL non“condensing REGULATORY COMPLIANCE (STANDARDS COMPLIANCE) Safety: CE Environmental: Complies with appropriate requirements of RoHs and WEEE PRODUCT DIMENSIONS 25.00cm x 13.00cm x 2.00cm (9.84" x 5.12" x 0.79" ) W, D, H PRODUCT WEIGHT 0.3kg (0.7lbs) approx. SHIPPING DIMENSIONS 29.30cm x 16.50cm x 5.90cm (11.54" x 6.50" x 2.32" ) W, D, H SHIPPING WEIGHT 0.5kg (1.1lbs) approx.
€3.122,00 €2.653,00
-
KRAMER Kramer H2A-OUT2-F34 - 2-Channel 4K HDR HDMI Output Card with Analog Audio
H2AOUT2F34 is a twochannel 4K@60Hz (4:4:4) HDMI output card with configurable analog audio features for compatible Kramer Modular MultiFormat Digital Matrix Switchers. H2AOUT2F34 outputs two 4K HDMI signals with selectable ARC (on the upper port), embedded, or deembedded unbalanced stereo audio. Max. Data Rate ” 18Gbps (6Gbps per graphics channel). Max. Resolution ” 4K@60Hz (4:4:4). HDMI Support ” 3D, Deep Color, x.v.Color„, ARC, Dolby® TrueHD, Dolby Digital Plus, DTS“HD®, and 7.1 multi“channel audio. Analog Audio Embedding/De“embedding ” On the same jack and ARC. HDCP 2.2/1.4 Compliant. 3D Pass“Through. EDID Capture ” Copies and stores the EDID from a display device. Kramer Equalization and re“Klocking Technology. ### OUTPUTS 2 HDMI: On female HDMI connectors PORTS 2 Analog Audio: On 3.5mm mini jacks VIDEO Max Data Rate: 18Gbps (6Gbps per graphics channel) Max Resolution: 4K@60Hz (4:4:4) HDMI Support: 3D, Deep Color, x.v.Color„, ARC, Dolby® TrueHD, Dolby Digital Plus, DTS“HD®, and 7.1 multi“channel audio USER INTERFACE Content Protection: HDCP 2.2/1.4 compliant EXTENSION LINE Range at 4K60 (4:2:0) or 4K30 (4:4:4) Resolution: 10m (32ft) Range at 1080p 12 bit (deep color) Resolution: 15m (49ft) POWER Consumption: 5W REGULATORY COMPLIANCE (STANDARDS COMPLIANCE) Safety: CE ENVIRONMENTAL CONDITIONS Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: “40° to +70°C (“40° to 158°F) Humidity: 10% to 90%, RHL non“condensing PRODUCT DIMENSIONS 12.90cm x 24.90cm x 2.00cm (5.08" x 9.80" x 0.79" ) W, D, H PRODUCT WEIGHT 0.1kg (0.3lbs) approx. SHIPPING DIMENSIONS 16.50cm x 34.50cm x 5.90cm (6.50" x 13.58" x 2.32" ) W, D, H SHIPPING WEIGHT 0.4kg (0.9lbs) approx.
€2.081,00 €1.769,00
-
KRAMER Kramer H2-OUT2-F34 - 2-Channel 4K HDR HDMI Output Card
H2OUT2F34 is a twochannel 4K@60Hz (4:4:4) HDMI output card for compatible Kramer Modular MultiFormat Digital Matrix Switchers. H2OUT2F34 outputs two 4K HDMI signals from the matrix chassis. Max. Data Rate ” 18Gbps (6Gbps per graphics channel). Max. Resolution ” 4K@60Hz (4:4:4). HDMI Support ” 3D, Deep Color, x.v.Color„, ARC, Dolby® TrueHD, Dolby Digital Plus, DTS“HD®, and 7.1 multi“channel audio. HDCP 2.2/1.4 Compliant. 3D Pass“Through. EDID Capture ” Copies and stores the EDID from a display device. Kramer Equalization and re“Klocking Technology. ### OUTPUTS 2 HDMI: On female HDMI connectors VIDEO Max Data Rate: 18Gbps (6Gbps per graphics channel) Max Resolution: 4K@60Hz (4:4:4) HDMI Support: 3D, Deep Color, x.v.Color„, ARC, Dolby® TrueHD, Dolby Digital Plus, DTS“HD®, and 7.1 multi“channel audio USER INTERFACE Content Protection: HDCP 2.2/1.4 compliant EXTENSION LINE Range at 4K60 (4:2:0) or 4K30 (4:4:4) Resolution: 10m (32ft) Range at 1080p 12 bit (deep color) Resolution: 15m (49ft) POWER Consumption: 5W REGULATORY COMPLIANCE (STANDARDS COMPLIANCE) Safety: CE ENVIRONMENTAL CONDITIONS Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: “40° to +70°C (“40° to 158°F) Humidity: 10% to 90%, RHL non“condensing PRODUCT DIMENSIONS 12.90cm x 24.90cm x 2.00cm (5.08" x 9.80" x 0.79" ) W, D, H PRODUCT WEIGHT 0.2kg (0.5lbs) approx. SHIPPING DIMENSIONS 16.50cm x 34.50cm x 5.90cm (6.50" x 13.58" x 2.32" ) W, D, H SHIPPING WEIGHT 0.4kg (0.9lbs) approx.
€1.186,00 €1.008,00
-
KRAMER Kramer VGAA-IN2-F16/F34 - 2-Channel VGA with Analog Audio Input Card
VGAAIN2F16/F34 is a twochannel VGA with analog audio input card for the VS1616 or VS34FD Series Modular MultiFormat Digital Matrix Switchers. The VGAAIN2F16/F34 inputs two VGA with analog audio signals into the chassis. Audio is accessed by connecting the supplied Kramer VGA with audio cables to each VGA port. Max. Bandwidth ” 450MHz. HDTV Compatible. Analog Audio Over Breakaway Connector. ### PORTS 2 VGA on 15“pin HD connectors, 2 unbalanced analog audio on 3.5mm mini jack connectors (accessible via C GF/GMAF“30 cables) BANDWIDTH 450MHz MAXIMUM RANGE 10m (32ft) POWER CONSUMPTION 9.5W OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing SAFETY REGULATORY COMPLIANCE CE ENVIRONMENTAL REGULATORY COMPLIANCE Complies with appropriate requirements of RoHs and WEEE INCLUDED ACCESSORIES 2 C“GF/GMAF“30 cables PRODUCT DIMENSIONS 25.20cm x 13.00cm x 2.00cm (9.92" x 5.12" x 0.79" ) W, D, H PRODUCT WEIGHT 0.3kg (0.7lbs) approx. SHIPPING DIMENSIONS 16.50cm x 30.00cm x 6.00cm (6.50" x 11.81" x 2.36" ) W, D, H SHIPPING WEIGHT 0.7kg (1.4lbs) approx.
€2.081,00
-
KRAMER Kramer SDIA-IN2-F16/F34 - 2-Channel SDI with Analog Audio Input Card
SDIAIN2F16/F34 is a twochannel SDI input card with optional analog audio embedding for the VS1616 or VS34FD Series Modular MultiFormat Digital Matrix Switchers. SDIAIN2F16/F34 inputs two SDI with optional unbalanced stereo audio signals into the chassis and converts each SDI signal separately into HDMI format for routing within the matrix switcher. Max. Data Rate ” 3Gbps. Multi“Standard Operation ” SDI, HD“SDI, 3G HD“SDI. Stereo Audio Embedding. ### PORTS 2 unbalanced analog audio on 3.5mm mini jack connectors, 2 SDI, 75„¦ on BNC connectors TOTAL BANDWIDTH 3Gbps MAXIMUM RANGE 300m (980ft) ” SD, 200m (655ft) ” HD 1080p, 90m (295ft) ” 3G 1080p 3D PASS THROUGH Not supported POWER CONSUMPTION 6W OPERATING TEMPERATURE 0° to +40°C (32° to 104°F) STORAGE TEMPERATURE “40° to +70°C (“40° to 158°F) HUMIDITY 10% to 90%, RHL non“condensing SAFETY REGULATORY COMPLIANCE CE ENVIRONMENTAL REGULATORY COMPLIANCE Complies with appropriate requirements of RoHs and WEEE PRODUCT DIMENSIONS 25.20cm x 13.00cm x 2.00cm (9.92" x 5.12" x 0.79" ) W, D, H PRODUCT WEIGHT 0.3kg (0.7lbs) approx. SHIPPING DIMENSIONS 30.00cm x 16.50cm x 6.00cm (11.81" x 6.50" x 2.36" ) W, D, H SHIPPING WEIGHT 0.5kg (1.0lbs) approx.
€2.226,00 €1.892,00
-
KRAMER Kramer F676-IN2-F34 - 4K60 4:4:4 HDMI over Ultra-Reach MM/SM Fiber Optic Input Card
F676IN2F34 is a highperformance HDMI fiber optic modular matrix input card for ultrareach extension of 4K@60Hz (4:4:4) HDMI signals. Designed for the VS34FD modular matrix, F676IN2F34 receives the transmitted optical signal from a compatible transmitter and converts it to an HDMI and RS232 signals. F676IN2F34 includes 2 multimode SFP+ transceivers, but can be used with any Kramer certified SFP+ transceivers, such as singlemode SFP+ transceivers. High Performance Standard Fiber Extender ” HDMI fiber transmitter for providing ultra“reach signals over either multi“mode or single“mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi“mode SFP+ included). Near“zero latency video chroma sub“sampling conversion technology, is employed to auto“adapt above 10G HDMI signals to 10G optical link signal data“rate.Note: To ensure specified performance, support, and warranty of this product, use only Kramer's certified hi“performance OSP SFP+ pluggable optical units. HDMI Signal Extension ” HDCP 2.2 compliant and supports up to 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS“HD. I“EDIDPro„ Kramer Intelligent EDID Processing„ ” Intelligent EDID handling, processing and pass“through algorithm that ensures Plug and Play operation for HDMI source and display systems. Bidirectional RS“232 Extension ” Serial interface data flows in both directions, to enable data transmission and control of devices. Cost“Effective Maintenance ” Fiber link connection LEDs facilitate easy local troubleshooting. Top of Form APPLICATIONS Highly secured and ultra“long extension of controllable AV signals for: governmental, medical, and rental and staging applications. Point“to“multipoint optical distribution of controllable AV signals over large spaces. Multipoint“to“multipoint optical distribution of controllable AV signals over large spaces using Kramer modular matrices. Ultra“long signals extension for multi“room and inter“building connectivity. ### INPUTS 2 Fiber Optic: On LC connectors PORTS 2 RS-232: On a 3“pin terminal block connector VIDEO Max Bandwidth: 18Gbps Max Resolution: 4K@60 (4:4:4) HDMI Support: 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS“HD Content Protection: HDCP 2.2 EXTENSION LINE Optical Fiber: Multi“mode (MM) or single“mode (SM) Optical Module: Kramer 10Gbps SFP+ IEEE 802.3ae compliant modules (MM is included) MULTI-MODE LINE Compliance: G.651.1 OFNR fiber Max Reach over OM3 MM Fiber: 3km (1.8 miles) SINGLE-MODE LINE Compliance: G.652D OFNR fiber Max Reach over OS1 SM Fiber: 33km (20.5 miles) EXTENDED RS-232 Baud Rate: 300 to 115200 USER INTERFACE Indicators: Optical link LEDs POWER Consumption: 9W ENVIRONMENTAL CONDITIONS Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: “40° to +70°C (“40° to 158°F) Humidity: 10% to 90%, RHL non“condensing REGULATORY COMPLIANCE (STANDARDS COMPLIANCE) Safety: CE, UL Environmental: RoHs, WEEE ACCESSORIES Included: 2 MM SFP+ transceivers PRODUCT DIMENSIONS 25.50cm x 13.00cm x 2.00cm (10.04" x 5.12" x 0.79" ) W, D, H PRODUCT WEIGHT 0.2kg (0.5lbs) approx. SHIPPING DIMENSIONS 29.50cm x 16.60cm x 6.40cm (11.61" x 6.54" x 2.52" ) W, D, H SHIPPING WEIGHT 0.4kg (0.9lbs) approx.
€4.314,00 €3.668,00
-
KRAMER Kramer DTAxrD2-IN2-F34 - 2-Channel 4K HDR HDMI over HDBaseT 2.0 DSC Input Card with Analog Audio
DTAxrD2IN2F34 is a 2channel, 4K@60Hz (4:4:4), DSC, HDMI, analog audio, bidirectional RS232, Ethernet, & IR over HDBaseT twisted pair receiver card for compatible Kramer Modular MultiFormat Digital Matrix Switchers. DTAxrD2IN2F34 inputs two extendedreach HDBaseT signals with selectable embedded/de“embedded analog audio, bidirectional RS232, Ethernet, and IR from the line to the chassis. Max. Data Rate ” 18Gbps (6Gbps per graphics channel), 10Gbps DSC over CAT cable. Max. Resolution ” 4K@60Hz (4:4:4). Analog Audio Embedding/De“embedding ” On the same jack. HDBaseT Technology ” HDTV compatible, HDCP 2.2/1.4 compliant. System Range ” Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables. Ethernet Extension ” Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control. Bidirectional RS“232 Extension ” Serial interface data flows in both directions, allowing data transmission and device control. Bidirectional Infrared Extension ” IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line. 3D Pass“Through. ### INPUTS 2 HDBaseT: On RJ“45 connectors PORTS 2 Unbalanced Audio: On a 6“pin terminal block connector 2 RS-232: On a 6“pin terminal block connector 2 IR: On a 4“pin terminal block 1 Ethernet: On an RJ“45 connector EXTENSION LINE Compression: Low“level standard DSC compression for signals above 4K@60 (4:2:0) 4K@60 (4:4:4) Range with Compression: Up to 100m (330ft) 4K@60 (4:2:0) Range with No Compression: Up to 100m (330ft) Full HD (1080p@60Hz) Range with No Compression: Up to 130m (430ft), Full HD (1080p@60Hz) Range in UltraLong Mode: Up to 180m (590ft) Compliance: HDBaseT 2.0 Note: Use Kramer shielded cables to achieve optimum extension ranges VIDEO Max Bandwidth with Compression: 17.95Gbps (5.98Gbps per graphic channel) Max Bandwidth with No Compression: 10.2Gbps (3.4Gbps per graphic channel) Max Resolution with Compression: 3840x2160@60Hz 4:4:4 24bpp Max Resolution with No Compression: 4096x2160@60Hz 4:2:0 24bpp Compliance: HDCP 2.2, HDR 10 EXTENDED ETHERNET Bandwidth: Up to 100Mbps EXTENDED RS-232 Baud Rate: 300 to 115200 POWER Consumption: 21.5W ENVIRONMENTAL CONDITIONS Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: “40° to +70°C (“40° to 158°F) Humidity: 10% to 90%, RHL non“condensing REGULATORY COMPLIANCE (STANDARDS COMPLIANCE) Safety: CE Environmental: Complies with appropriate requirements of RoHs and WEEE PRODUCT DIMENSIONS 25.00cm x 13.00cm x 2.00cm (9.84" x 5.12" x 0.79" ) W, D, H PRODUCT WEIGHT 0.2kg (0.5lbs) approx. SHIPPING DIMENSIONS 29.30cm x 16.50cm x 5.90cm (11.54" x 6.50" x 2.32" ) W, D, H SHIPPING WEIGHT 0.4kg (0.9lbs) approx.
€3.122,00 €2.654,00
-
KRAMER Kramer DTAxrC2-IN2-F34 - 2-Channel 4K HDR HDMI over HDBaseT Input Card with Analog Audio & PoE Provider
DTAxrC2IN2F34 is a 2channel, 4K@60Hz (4:4:4), CSC, HDMI, analog audio, bidirectional RS232, Ethernet, & IR over HDBaseT twisted pair receiver card for compatible Kramer Modular MultiFormat Digital Matrix Switchers. DTAxrC2IN2F34 inputs two extendedreach HDBaseT signals with selectable embedded/de“embedded analog audio, bidirectional RS232, Ethernet, and IR from the line to the chassis. Max. Data Rate ” 18Gbps (6Gbps per graphics channel), 10Gbps CSC over CAT cable. Max. Resolution ” 4K@60Hz (4:4:4). Analog Audio Embedding/De“embedding or ARC ” On the same jack. HDBaseT Technology ” HDTV compatible, HDCP 2.2/1.4 compliant. System Range ” Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables. Ethernet Extension ” Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control. Bidirectional RS“232 Extension ” Serial interface data flows in both directions, allowing data transmission and device control. Bidirectional Infrared Extension ” IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line. 3D Pass“Through. PoE (Power over Ethernet) Enabled ” Provides PoE power to a connected device with the Kramer PoE Power Supply Add“On PS“4812 (sold separately). ### INPUTS 2 HDBaseT: On RJ“45 connectors PORTS 2 Unbalanced Audio: On a 6“pin terminal block connector 2 RS-232: On a 6“pin terminal block connector 2 IR: On a 4“pin terminal block 1 Ethernet: On an RJ“45 connector EXTENSION LINE Standard Compression: Up to 100m (330ft) at 4K@60Hz (4:4:4), 4K@60Hz (4:2:0) or 4K@30Hz (4:4:4) Up to 180m (590ft) at full HD (1080p @60Hz 24bpp) High Compression: Up to 100m (330ft) at 4K@60Hz (4:4:4), or 4K@60Hz (4:2:0) Up to 180m (590ft) at 4K@30Hz (4:4:4) Up to 200m (650ft) at full HD (1080p @60Hz 24bpp) No Compression: Up to 100m (330ft) at 4K@60Hz (4:2:0) Up to 180m (590ft) at full HD (1080p @60Hz 24bpp) Standards Compliance: HDBaseT 1.0 Note: When using recommended Kramer cables VIDEO Max Data Rate: Up to 18Gbps (6Gbps per graphic channel), 10Gbps CSC over CAT cable Standard Compression Max Resolution: 4096x2160@60Hz (4:4:4) 24bpp High Compression Max Resolution: 3840x2160@60Hz (4:4:4) 24bpp No-Compression Max Resolution: 4096x2160@60Hz (4:2:0) 24bpp Compliance: HDCP 2.2, HDR 10 HDMI Support: Deep color, x.v.Color„, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS“HD, 2K, 4K, and 3D as specified in HDMI 2.0 EXTENDED ETHERNET Bandwidth: Up to 100Mbps EXTENDED RS-232 Baud Rate: 300 to 115200 POWER Consumption: 21.5W ENVIRONMENTAL CONDITIONS Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: “40° to +70°C (“40° to 158°F) Humidity: 10% to 90%, RHL non“condensing REGULATORY COMPLIANCE (STANDARDS COMPLIANCE) Safety: CE Environmental: Complies with appropriate requirements of RoHs and WEEE PRODUCT DIMENSIONS 25.00cm x 13.00cm x 2.00cm (9.84" x 5.12" x 0.79" ) W, D, H PRODUCT WEIGHT 0.3kg (0.7lbs) approx. SHIPPING DIMENSIONS 16.50cm x 34.50cm x 5.90cm (6.50" x 13.58" x 2.32" ) W, D, H SHIPPING WEIGHT 0.5kg (1.1lbs) approx.
€2.753,00 €2.340,00
-
KRAMER Kramer H2A-IN2-F34 - 2-Channel 4K HDR HDMI Input Card with Analog Audio
H2AIN2F34 is a twochannel 4K@60Hz (4:4:4) HDMI input card with configurable analog audio features for compatible Kramer Modular MultiFormat Digital Matrix Switchers. H2AIN2F34 inputs two 4K HDMI signals with selectable ARC (on the upper port), embedded, or deembedded unbalanced stereo audio. Max. Data Rate ” 18Gbps (6Gbps per graphics channel). Max. Resolution ” 4K@60Hz (4:4:4). HDMI Support ” 3D, Deep Color, x.v.Color„, ARC, Dolby® TrueHD, Dolby Digital Plus, DTS“HD®, and 7.1 multi“channel audio. Analog Audio Embedding/De“embedding ” On the same jack and ARC. HDCP 2.2/1.4 Compliant. 3D Pass“Through. EDID Capture ” Copies and stores the EDID from a display device. Kramer Equalization and re“Klocking Technology. ### INPUTS 2 HDMI: On female HDMI connectors PORTS 2 Analog Audio: On 3.5mm mini jacks VIDEO Max Data Rate: 18Gbps (6Gbps per graphics channel) Max Resolution: 4K@60Hz (4:4:4) HDMI Support: 3D, Deep Color, x.v.Color„, ARC, Dolby® TrueHD, Dolby Digital Plus, DTS“HD®, and 7.1 multi“channel audio Content Protection: HDCP 2.2/1.4 compliant EXTENSION LINE Range at 4K60 (4:2:0) or 4K30 (4:4:4) Resolution: 10m (32ft) Range at 1080p 12 bit (deep color) Resolution: 15m (49ft) POWER Consumption: 5W ENVIRONMENTAL CONDITIONS Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: “40° to +70°C (“40° to 158°F) Humidity: 10% to 90%, RHL non“condensing REGULATORY COMPLIANCE (STANDARDS COMPLIANCE) Safety: CE PRODUCT DIMENSIONS 12.90cm x 24.90cm x 2.00cm (5.08" x 9.80" x 0.79" ) W, D, H PRODUCT WEIGHT 0.2kg (0.5lbs) approx. SHIPPING DIMENSIONS 16.50cm x 34.50cm x 5.90cm (6.50" x 13.58" x 2.32" ) W, D, H SHIPPING WEIGHT 0.4kg (0.9lbs) approx.
€2.529,00 €2.150,00
-
KRAMER Kramer H2-IN2-F34 -2-Channel 4K HDR HDMI Input Card
H2IN2F34 is a twochannel 4K@60Hz (4:4:4) HDMI input card for compatible Kramer Modular MultiFormat Digital Matrix Switchers. H2IN2F34 inputs two 4K HDMI signals into the matrix chassis. Max. Data Rate ” 18Gbps (6Gbps per graphics channel). Max. Resolution ” 4K@60Hz (4:4:4). HDMI Support ” 3D, Deep Color, x.v.Color„, ARC, Dolby® TrueHD, Dolby Digital Plus, DTS“HD®, and 7.1 multi“channel audio. HDCP 2.2/1.4 Compliant. 3D Pass“Through. EDID Capture ” Copies and stores the EDID from a display device. Kramer Equalization and re“Klocking Technology. ### INPUTS 2 HDMI: On female HDMI connectors VIDEO Max Data Rate: 18Gbps (6Gbps per graphics channel) Max Resolution: 4K@60Hz (4:4:4) HDMI Support: 3D, Deep Color, x.v.Color„, ARC, Dolby® TrueHD, Dolby Digital Plus, DTS“HD®, and 7.1 multi“channel audio Content Protection: HDCP 2.2/1.4 compliant EXTENSION LINE Range at 4K60 (4:2:0) or 4K30 (4:4:4) Resolution: 10m (32ft) Range at 1080p 12 bit (deep color) Resolution: 15m (49ft) POWER Consumption: 5W ENVIRONMENTAL CONDITIONS Operating Temperature: 0° to +40°C (32° to 104°F) Storage Temperature: “40° to +70°C (“40° to 158°F) Humidity: 10% to 90%, RHL non“condensing REGULATORY COMPLIANCE (STANDARDS COMPLIANCE) Safety: CE PRODUCT DIMENSIONS 12.90cm x 24.90cm x 2.00cm (5.08" x 9.80" x 0.79" ) W, D, H PRODUCT WEIGHT 0.2kg (0.5lbs) approx. SHIPPING DIMENSIONS 16.50cm x 34.50cm x 5.90cm (6.50" x 13.58" x 2.32" ) W, D, H SHIPPING WEIGHT 0.4kg (0.9lbs) approx.
€1.634,00 €1.389,00