Microfoon & Acc
-
Rode Rode VideoMic NTG
De VideoMic NTG is een uiterst veelzijdige microfoon die ongelooflijke audio levert in iedere situatie. Gebruik het met uw camera om geluid van broadcast kwaliteit op locatie op te nemen. Gebruik hem met je smartphone of tablet voor kristalhelder geluid onderweg. Gebruik hem als desktop USB-microfoon voor podcasting, gaming, spraakoproepen en meer. Eén microfoon. Eindeloze mogelijkheden. Kenmerken: Revolutionair akoestisch ontwerp met ongeëvenaarde akoestische transparantie en een natuurlijk, ongekleurd geluid Zeer directioneel supercardioïde polair patroon en zeer vlakke frequentierespons Unieke traploze versterkingsregeling Auto-sensing 3,5 mm-uitgang voor naadloze verbinding met zowel camera's als mobiele apparaten Digitale USB-uitgang voor opnemen op een computer of mobiel apparaat Digitaal schakelen - regelt hoogdoorlaatfilter, pad, hoogfrequente boost en veiligheidskanaal Interne oplaadbare lithium-ionbatterij biedt meer dan 30 uur opnametijd Ultralichtgewicht (94 g) en robuuste aluminium constructie ### Microphone Form Factor Stand/Boom Mount Sound Field Mono Operating Principle Pressure Gradient Capsule Electret Condenser Polar Pattern Supercardioid Orientation End Address Circuitry Solid-State Pad -20 dB High-Pass Filter 75 Hz 150 Hz Tone Adjustment High Boost Gain Adjustment Yes Indicators 1 x Single LED (Power)1 x Single LED (Clip)5 x Single LED (Status) On-Board Controls Gain/Sensitivity, High-Pass Filter, HF, Pad, On/Off Windscreen Foam (Included) Performance Frequency Range 20 Hz to 20 kHz 35 Hz to 18 kHz ±3 dB Maximum SPL 120 dB SPL (1% THD) Impedance 10 Ohms Sensitivity -26 dBV/Pa at 1 kHz Dynamic Range 105 dB A-Weighted Signal-to-Noise Ratio 79 dB A-Weighted Equivalent Noise Level 15 dB A-Weighted Connectivity Output Connectors (Analog) 1 x 1/8" / 3.5 mm TRRS Female (on Mic) Output Connectors (Digital) 1 x USB Type-C Female (on Mic) Digital Audio A/D Conversion 24-Bit Sample Rate 48 kHz Operating System Support Android, Windows, iOS, macOS/OS X OS Compatibility Android Windows iOS macOS *As of November, 2019: check with manufacturer for the most up-to-date compatibility Available Port USB (Interface Unspecified) Power Bus Power USB Battery Type 1 x Built-In (Included) Battery Chemistry Lithium-Ion Approximate Battery Life 30 Hours Physical Color Black Mounting Camera/Shoe-Mount, Shockmount (with Included Hardware) Mounting Thread Size 3/8"-16 Female Included Case None Construction Material Aluminum Dimensions ¸: 0.85 x L: 6.73" / ¸: 21.6 x L: 171 mm Weight 3.32 oz / 94 g ### Rode VideoMic NTG SM7-R Shoe Shockmount Foam Windscreen SC10 3.5mm TRRS Cable USB Type-A to USB Type-C Cable
€325,00
-
Rode Rode VideoMic GO II
De VideoMic GO II is ontworpen om het opnemen van ongelooflijke audio ongelooflijk eenvoudig te maken. Ultralicht en compact, met krachtige functies die eenvoudig te gebruiken zijn, het is perfect voor alle vormen van contentcreatie met een camera, smartphone of tablet of computer. Het is tijd om uw inhoud naar een hoger niveau te tillen. Belangrijkste kenmerken: Compacte shotgun-microfoon van broadcast kwaliteit Ultralicht (slechts 89 gram) Geen batterij nodig en geen ingewikkeld schakelen - ongelooflijk eenvoudig te gebruiken 3,5 mm TRS-uitgang voor gebruik met camera's USB-uitgang voor gebruik met mobiele apparaten (iOS en Android) en computers (macOS en Windows) Compatibel met R˜DE-apps voor toegang tot geavanceerde functies, krachtige digitale signaalverwerking en opnames van studiokwaliteit op elk apparaat ### Microphone Primary Applications Audio for Video Form Factor Camera-Mount / Shotgun Mic Intended Sound Sources Speech/Voice Over, Room Ambiance Sound Field Mono Operating Principle Pressure Gradient Capsule Electret Condenser Polar Pattern Supercardioid Orientation End Address Circuitry Solid-State Pad None High-Pass Filter None Tone Adjustment None Gain Adjustment None Indicators 1 x Blue Single LED (Power) On-Board Controls None Windscreen Foam (Included) Performance Frequency Range 20 Hz to 20 kHz Maximum SPL 110 dB SPL Impedance 2.2 Kilohms Sensitivity -31 dBV at 1 kHz Dynamic Range 95 dB A-Weighted Signal-to-Noise Ratio 79 dB A-Weighted Equivalent Noise Level 15 dB A-Weighted Connectivity Output Connectors (Analog) 1 x 1/8" / 3.5 mm TRS Female (on Mic) Output Connectors (Digital) 1 x USB Type-C Female (on Mic) Headphone Connector None Wireless Connectivity None Bluetooth None Digital Audio A/D Conversion 24-Bit Sample Rate 48 kHz Operating System Support Android, Windows, iOS, macOS/OS X OS Compatibility Android Windows iOS macOS *As of January, 2022: check with manufacturer for the most up-to-date compatibility Mobile Device Compatibility iPhone 6 or LateriPad Pro 1st Gen. or LateriPad Air 1st Gen. or LateriPad 6th Gen. or LateriPad Mini 2 or LateriPod Touch 7th Gen. Android Smartphone Android Tablet Available Port USB 2.0 Power Bus Power USB Operating Voltage 2 to 5 V (Plug-In Power)5 V (USB Bus Power) Physical Color Black Mounting Camera/Shoe-Mount, Shockmount (Included) Mounting Thread Size 3/8"-16 Female Included Case None Included Filters None Dimensions ¸: 0.9 x L: 4.7" / ¸: 21.6 x L: 120 mm (Microphone)H: 3.4 x W: 2.8 x L: 5.9" / H: 86 x W: 70 x L: 150 mm (with Mount, with Windscreen) Weight 1.2 oz / 33 g (Microphone)3.4 oz / 96 g (with Mount, with Windscreen) ### Rode VideoMic GO II SM8-R Camera Mount Foam Windscreen SC14 3.5mm TRS Cable
€119,00
-
Rode Rode Interview Go
De Rode Interview GO is een handige houder waar u de Rode Wireless GO zender opschuift en u het kunt bedienen als een handmicrofoon. Het beschikt over een stevige bevestiging voor de cold shoe-clip van de Rode Wireless GO om de microfoon op zijn plaats te houden, plus een windscherm met hoge dichtheid om pops te verminderen en de capsule tegen wind te beschermen wanneer u buiten opneemt. De Rode Interview Go zelf is geen microfoon. Belangrijkste kenmerken: Verandert elke Rode Wireless GO-zender in een handmicrofoon Inclusief handvat en verwijderbaar windscherm Compatibel met Rode Wireless GO en Rode Wireless GO II
€30,00
-
Rode RODE RODECaster Pro II Cover
De R˜DECover 2 is een op maat gemaakte cover die is ontworpen om perfect over de R˜DECaster Pro II te passen. Het is gemaakt van hoogwaardig helder polycarbonaat en beschermt uw R˜DECaster Pro II tegen vuil en stof en zorgt ervoor dat uw installatie er netjes en professioneel uitziet wanneer deze niet in gebruik is.
€52,00 €37,00
-
Rode Rode RODECaster Pro II
Van evolutie naar revolutieSlim ontworpen voor meer dan podcasting, de Rode RODECaster Pro II geïntegreerde audioproductiestudio breidt het succes van zijn voorganger uit met verbeteringen in geluid, connectiviteit en aanpassingsvermogen, waardoor het aantrekkelijk wordt voor live streamers, gamers en muzikaal ingestelde makers. Deze alles-in-één oplossing maakt vloeiende workflows mogelijk via een groot touchscreen en handige knoppen. Het brengt studiokwaliteit on-board verwerking, multitrack opname en mixen, toewijsbare soundpads en kan helemaal op maat worden ingesteld. Produceer en mix on-the-fly in slechts enkele ogenblikken, met maximaal vier microfoons, muziek, vooraf opgenomen segmenten en externe gasten die aan het bellen zijn - allemaal tegelijk. Versie II-upgradesPremium voorversterkers met mic/line/instrument combo-ingangen Aanpasbare mixer met RGB-kleurcodering Uitgebreid programmeerbare SMART-pads voor het starten van geluiden, shows, mixeracties en meer iOS-ready dubbele USB Type-C-poorten om meerdere computers of mobiele apparaten op aan te sluiten Geavanceerde hoogwaardige Bluetooth-invoer/-uitvoer, Wi-Fi en Ethernet 4 hoogwaardige voorversterkersDe Revolution-voorversterkers leveren helderheid en detail met ultralage ruis (slechts -131,5 dBV) en ongelooflijke versterking tot 76 dB, wat ideale opnameniveaus mogelijk maakt, zelfs voor dynamische microfoons met een laag uitgangsvermogen “ er is geen microfoonboostes, liftes of normalisatie nodig. Pro-grade Neutrik XLR-1/4" combo-aansluitingen bieden ingangen voor microfoons (+48V fantoomvoeding is beschikbaar voor condensatormicrofoons), line-level bronnen of instrumenten zoals elektrische gitaar en bas. Analoge ingangskanalen kunnen worden gekoppeld om eenvoudig stereomicrofoonopstellingen, synths, DJ-mixers of buitenboordapparatuur op te nemen. Studiokwaliteit processing en effectenDe RODECaster Pro II heeft authentieke emulaties van klassieke APHEX-hardwareprocessors - Aural Exciter verhoogt de helderheid, Big Bottom voegt een warme en diepe laagfrequente punch toe en Compellor brengt het allemaal samen met compressie/nivellering - evenals andere veelgebruikte processors, waaronder een reverb , delay, pitch shifter, equalizer, hoogdoorlaatfilter, noise gate, de-esser, roboteffecten en meer. Gebruik de VoxLab-editor om snel verschillende processors in te stellen via drie intuïtieve bedieningselementen, of gebruik de geavanceerde editor (op het scherm of met een computer) voor uitgebreide bewerkingen. Gebruik presets, sla je eigen presets op en laad ze op elk gewenst moment om direct je favoriete instellingen op te roepen. 8 programmeerbare SMART-padsIn plaats van de soundpads van het originele model heeft de RODECaster Pro II programmeerbare SMART-pads. Elke SMART-pad kan audiobestanden activeren, speciale effecten activeren, MIDI-commando's naar software of hardware sturen, of mixerfuncties uitvoeren zoals fades, music ducking en bleeping. Bank-shift-knoppen onderaan de pads bieden gemakkelijke toegang tot acht banken voor in totaal 64 unieke acties. Selecteer zelf de kleur voor de padverlichting, een handige manier om te onthouden welk effect op welke pad zit. Aanpasbare meerkanaalsmixerDe 9-kanaals mixer beschikt over 6 kanalen met full-size fysieke faders en drie virtuele kanalen, met de optie om via digitale hosting en hardware-integraties uit te breiden met toekomstige updates. Fysieke faders en virtuele kanalen kunnen vrij worden toegewezen aan de vier analoge ingangen, USB- en Bluetooth-interfaces en SMART-pads. Elk kanaal biedt een pan-regeling, mute-knop en luisterknop (pre- of after-fader solo). Met kleurcodering voor ieder kanaal op de RODECaster Pro II kunt u de verschillende bronnen snel herkennen. Stereo- of meersporenopnameNeem stereo- of individuele multitrack-bestanden op een microSD-kaart of USB-opslag, zoals een externe schijf. Kies een ongecomprimeerd WAV-formaat voor maximale audiokwaliteit of MP3-formaat om opslagruimte te besparen en de opnametijd te verlengen. Gebruik de RODECaster Pro II als een hoogwaardige USB-audio-interface om naar een computer te streamen of op te nemen. RODECaster Pro II draait op 24-bit / 48 kHz, de industriestandaard voor videoproductie. Controle voor iedereenVier 1/4" hoofdtelefoonuitgangen voor monitoring voor de gastheer en maximaal drie gasten. Met aparte volumeregelaars met kleurcodering kunnen alle deelnemers eenvoudig hun eigen hoofdtelefoonniveau regelen. Sluit een paar actieve luidsprekers aan op de 1/4"-lijnuitgangen als u voor een live publiek wilt spelen, of ga draadloos en monitor via een Bluetooth-luidspreker. Selecteerbare hoge of lage gevoeligheid voor de versterking van de hoofdtelefoonuitgangen, zodat u gemakkelijker hoofdtelefoonniveaus kunt instellen. Podcastvriendelijke functiesMet de talkback-modus van de producer kunt u met gasten communiceren zonder de opname te beïnvloeden. Uitgerust met geavanceerde Bluetooth-connectiviteit voor ultrahoge kwaliteit telefoongesprekintegratie, kristalheldere audiostreaming, draadloze bewaking en meer. Mix-minus op de Bluetooth- en USB-kanalen voorkomt dat de persoon aan de andere kant van de lijn een storende echo hoort, waardoor de RODECaster Pro II ideaal is voor externe en lokale gasten in uw podcast. Snelle workflowSla meerdere shows op met alle instellingen van de RODECaster Pro II, een ideale manier om direct te schakelen tussen soorten producties zoals podcasts, livestreams en gamecommentaar. Op maat gemaakte presets voor Rode microfoons en andere populaire modellen helpen je om snel een goed geluid te krijgen. Het 5,5" kleurentouchscreen heeft haptische feedback en automatische helderheidsaanpassing, en is gekanteld voor optimale weergave. Naast het touchscreen is draaiknop geplaatst voor efficiënte navigatie en bediening. Dankzij dubbele USB Type-C-interfaces kunnen twee computers of mobiele apparaten tegelijkertijd worden aangesloten voor geweldige opties voor podcasting op afstand tot het organiseren van complexe streamingconfiguraties. Extra functiesEen interne 1,5 GHz quad-core audio-engine heeft een hoge verwerkingscapaciteit en geeft veel extra ruimte voor toekomstige updates. Bidirectionele MIDI-communicatie zorgt voor uitstekende integratie met DAW's en streamingsoftware. Wi-Fi- en Ethernet-verbindingen bieden snelle communicatie met computers en andere apparaten voor het draadloos bijwerken van firmware, software- en hardware-integraties en meer. De USB-aansluitingen zijn MFi-gecertificeerd voor naadloze integratie met iOS-apparaten zoals iPads. Voed de RODECaster Pro II via de meegeleverde AC-adapter of via USB Type-C PD (30W). De RODECaster Pro II beschikt over 10 talen: Engels, Chinees, Japans, Koreaans, Frans, Duits, Italiaans, Spaans, Portugees en Hindi. RODECaster Pro II kan eenvoudig worden met nieuwe firmware die voor alle gebruikers beschikbaar zal zijn via Wi-Fi, Ethernet of USB. Bescherm uw RODECaster Pro II met de optionele RODECover II, een stevige polycarbonaat deksel die het beschermt tegen vuil, stof en morsen. Montageopties zijn onder meer een 3/8" schroefdraad voor verschillende statiefopties en 100 x 100 VESA-montagegaten. ### Form Factor Tabletop Number of Tracks 14 (12 Inputs + Stereo Mix) Display 5.5" Color Touchscreen Channels of I/O Analog:4 Inputs / 4 Outputs Maximum Sampling Rate 48 kHz / 24-Bit Number of Microphone Preamps 4 Preamps Built-In Microphone None Input Level Adjustment via Touchscreen Meters LED Number of Headphone Mixes 1 x Master with Mix-Minus3 x Guest with Mix-Minus Sample Pads 8 x Assignable Signal Processing Pad None Gain/Trim Range 0 to 76 dB EQ Input Channels:3-Band EQ Dynamic Processing Compressor, Limiter, Gate Solo/Mute Solo-in-Place/AFL, Mute, PFL per Input Channel Built-In Effects DelayReverbPitch Shift Connectivity Analog Audio I/O 4 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line/Hi-Z Input2 x 1/4" TRS Balanced Line Output4 x 1/4" TRS Unbalanced Headphone Output Phantom Power 48 V, Selectable On/Off Digital Audio I/O None Host Connection / USB 2 x USB Type-C USB (Non-Host) None Sync I/O None Network I/O 1 x RJ45 Ethernet (Gigabit) MIDI I/O None Wireless Connectivity Bluetooth, Wi-Fi Performance Frequency Response Mic Inputs:20 Hz to 20 kHz Monitor Outputs:20 Hz to 20 kHz Maximum Output Level Line Outputs:+4 dBu Headphone Output Power 250 mW Impedance Mic Inputs:4 Kilohms Hi-Z Inputs:1 Megohm EIN -131.5 dBV A-Weighted Digital Audio Sample Rates 48 kHz Bit Depths 24-Bit Audio Storage & Playback Supported Media microSDHC Card, microSDXC Card, USB Flash Drive Memory Card Slot 1 x microSDXC File System Support USB Flash Drive: exFAT Compatibility OS Compatibility macOS 15 or LaterWindows 10.1803 or LaterWindows 11iPadOS Included Software None Compatible Software (Not Included) Any Core Audio (Mac) Compliant Software Mobile Device Compatibility iPad Power Power Requirements AC/DC Power Adapter (Included) or USB Bus Power AC/DC Power Adapter 15 VDC at 2 A (Included) Physical Anti-Theft Features Kensington Security Slot Dimensions 12.2 x 10.7 x 3.3" / 30.9 x 27.3 x 8.3 cm Weight 4.4 lb / 2.0 kg ### Rode RODECaster Pro II USB Type-C Power Adapter AC Power Cable SC27 USB Type-C to USB Type-C Cable
€859,00
-
Rode RODE - RODE TX-M2 TRANSMITTER - High quality condenser microphone
The R˜DELink TX-M2 Microphone is a versatile, detailed, and perfectly balanced wireless condenser microphone for singers, presenters, and reporters. Transmitting a 128-bit encrypted signal on the license-free 2.4GHz spectrum, the TX-M2 pairs easily with the RX-DESK and RX-CAM receivers, delivering crystal clear audio and incredibly low handling noise. Designed and made in Australia, the TX-M2 uses next generation digital wireless technology to constantly monitor frequencies and automatically switch to the strongest possible signal level, so users are always given the best quality of sound. With over 100m of range, the stylish and durable TX-M2 is the perfect addition to any Filmmakers' Kit. The TX-M2 is powered by the LB-1 Lithium-Ion Rechargeable Battery that provides over 10 hours of use in a single charge, or 2x AA batteries for over 6 hours of use. The sleek and portable handheld microphone houses a super cardioid condenser capsule and a mute switch, making it an incredible wireless alternative to the popular M2 microphone while continually delivering the sensitivity and versatility offered by condenser microphones. The TX-M2 is a great addition to the R˜DELink Filmmaker Kit, providing a simple wireless microphone solution to all filmmakers. ### TX-M2 Specifications Weight 222g Transmission type 2.4GHz fixed frequency agile system System dynamic 118dB range Range (distance) Up to 100m (based on optimal environment) Frequency Response 35Hz - 20 kHz Max input signal level 140dB SPL Power source R˜DE LB-1 4.2v Lithium-ion Rechargeable Battery or 2 x AA Batteries Antenna Diversity antenna Dimensions (W x H x D) 40mm x 256mm x 40mm
€325,00
-
Rode RODE - RODE NTR - Active Ribbon Microphone
FEATURES Highly sensitive 1.8 micron ribbon element Bi-Directional Polar Pattern Internal Shock Mounting System Custom designed and manufactured transformer Heavy-duty matte black finish Ribbon-securing travel screw supplied Designed and manufactured in Australia One free ribbon replacement during warranty period 10 year extended warranty when you register your microphone At first glance of the NTR you're aware that it's very special and unique “ an intricate blend of art and science. Designed to hang in the world's finest recording studios and performance halls equally as well as home studio spaces, its existence is a labour of love for R˜DE. Every element of the NTR, from the transformer to the ribbon element itself, has been designed and created in-house at R˜DE's headquarters in Sydney, Australia. All with the aim of crafting the finest ribbon microphone available. Sonically, the NTR is capable of reproducing unprecedented high frequency detail and accuracy, addressing common criticisms of other ribbon microphones, while opening up the possible usage scenarios considerably. This allows it to record sound sources that usually require a more sensitive microphone element. ### NTR Specifications Acoustic Principle Velocity Transducer Active Electronics Step-up Transformer and signal balanced preamp stage Polar Pattern Address Type Side Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 130dBSPL Sensitivity -30.5dB re 1 Volt/Pascal (30.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 15dBA Power Options P48 Weight 1047g Dimensions 216mmH x 65mmW x 65mmD Output XLR
€729,00
-
Rode RODE - RODE NT2000 - Seamlessly Variable Dual 1" Condenser Microphone
FEATURES Large 1 HF1 gold sputtered capsule Continuously variable polar pattern, from Omni to Cardioid to Figure 8 controlled on the mic Continuously variable PAD and High-Pass Filter Ultra low noise, transformerless surface mount circuitry Wide dynamic range High strength welded and heat treated steel mesh head Internal capsule shock mounting Includes SM2 shock mount and RC1 case 10 year extended warranty when you register your microphone The R˜DE NT2000 microphone is a studio-quality large diaphragm condenser with seamlessly variable polar patterns. Its polar patterns selection, filter and pad are conveniently located on the front of the microphone body for ease of use. Audiophile quality surface-mount electronics combined with a gold-sputtered dual 1" capsule provide extremely low self-noise (7dBA) and a maximum SPL of 147 dB (up to 157 dB with pad fully engaged) giving an incredible amount of versatility and ensuring exceptional results. The R˜DE NT2000 microphone is designed and made in Australia, and covered by R˜DE's industry leading 10 year warranty. ### NT2000 Specifications Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 1.00" Polar Pattern Address Type Side Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 147dBSPL Maximum Output Level 15.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 7dBA Power Options P24 P48 Weight 831.00g Dimensions 208.00mmH x 55.00mmW x 55.00mmD Output XLR
€619,00
-
Rode RODE - RODE NT1000 - 1" Studio Condenser Microphone
FEATURES HF2 1 capsule with gold-plated diaphragm Cardioid polar pattern True condenser (externally biased) Full frequency response Ultra low noise High strength welded and heat-treated mesh head Internal capsule shock mounting 10 year extended warranty when you register your microphone With its ultra-low 6dBA self-noise and transformerless circuitry, the R˜DE NT1000 exhibits exceptional performance when recording both vocals and instruments. Voiced for versatility, it has been hailed by many as the ultimate microphone for grand piano and drum overheads. The NT1000 is also a fantastic vocal microphone. The R˜DE NT1000 microphone is designed and made in Australia, and covered by R˜DE's industry leading 10 year warranty. ### NT1000 Specifications Acoustic Principle Pressure Gradient Active Electronics Unity-gain closed-loop impedance converter; JFET input with bipolar buffering Capsule 1.00" Polar Pattern Address Type Side Frequency Range 20Hz - 20kHz Output Impedance 100Ω Maximum SPL 140dBSPL Maximum Output Level 13.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 6dBA Power Options P24 P48 Weight 682.00g Dimensions 209.00mmH x 54.00mmW x 54.00mmD Output XLR
€389,00
-
Rode RODE - RODE NT55-matched pair - Multi-Pattern 1/2" Condenser Microphones
FEATURES Externally biased condenser Cardioid or Omni polar pattern using included interchangable capsules Gold sputtered 1/2 capsule Three position PAD - 0dB, -10dB and -20dB Three position High-Pass Filter - flat, 75Hz and 150Hz Surface mount circuitry Low noise Available as Certified Matched Pair 10 year extended warranty when you register your microphone Like the NT5, the R˜DE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule. Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer. Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom. Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair. The NT55 is designed and made in Australia, and covered by R˜DE's industry leading 10 year warranty. ### Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.50" Polar Pattern Address Type End Frequency Range 20Hz - 20kHz Output Impedance 100Ω Maximum SPL 136dBSPL Maximum Output Level 8.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 15dBA Power Options P48 Weight 110.00g Dimensions 145.00mmH x 20.00mmW x 20.00mmD Output XLR
€835,00
-
Rode RODE - RODE NT55-Single - Multi-Pattern 1/2" Condenser Microphones
FEATURES Externally biased condenser Cardioid or Omni polar pattern using included interchangable capsules Gold sputtered 1/2 capsule Three position PAD - 0dB, -10dB and -20dB Three position High-Pass Filter - flat, 75Hz and 150Hz Surface mount circuitry Low noise Available as Certified Matched Pair 10 year extended warranty when you register your microphone Like the NT5, the R˜DE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule. Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer. Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom. Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair. The NT55 is designed and made in Australia, and covered by R˜DE's industry leading 10 year warranty. ### NT55 Specifications Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.50" Polar Pattern Address Type End Frequency Range 20Hz - 20kHz Output Impedance 100Ω Maximum SPL 136dBSPL Maximum Output Level 8.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 15dBA Power Options P48 Weight 110.00g Dimensions 145.00mmH x 20.00mmW x 20.00mmD Output XLR
€389,00
-
Rode RODE - RODE NT5-matched pair - Compact 1/2" Cardioid Condenser Microphone
FEATURES Externally biased condenser Gold sputtered 1/2 capsule Heavy-duty satin-nickel plated body Dual power operation Surface mount circuitry Low noise Full frequency response Available as Certified Match Pair 10 year extended warranty when you register your microphone The NT5 is R˜DE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'. Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer. Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom. Expanding the NT5's versatility, an interchangeable omnidirectional capsule (NT45-O) is available. Finished in durable satin nickel, the NT5 available as a single microphone or as an acoustically matched pair. The NT5 is designed and made in Australia, and covered by R˜DE's industry leading 10 year warranty. ### SPECIFICATIONS Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.50" Polar Pattern Address Type End Frequency Range 20Hz - 20kHz Output Impedance 100Ω Maximum SPL 143dBSPL Maximum Output Level 13.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 16dBA Power Options P24 P48 Weight 101.00g Dimensions 118.00mmH x 20.00mmW x 20.00mmD Output XLR
€419,00
-
Rode RODE - RODE NT5-Single - Compact 1/2" Cardioid Condenser Microphone
FEATURES Externally biased condenser Gold sputtered 1/2 capsule Heavy-duty satin-nickel plated body Dual power operation Surface mount circuitry Low noise Full frequency response Available as Certified Match Pair 10 year extended warranty when you register your microphone The NT5 is R˜DE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'. Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer. Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom. Expanding the NT5's versatility, an interchangeable omnidirectional capsule (NT45-O) is available. Finished in durable satin nickel, the NT5 available as a single microphone or as an acoustically matched pair. The NT5 is designed and made in Australia, and covered by R˜DE's industry leading 10 year warranty. ### SPECIFICATIONS Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.50" Polar Pattern Address Type End Frequency Range 20Hz - 20kHz Output Impedance 100Ω Maximum SPL 143dBSPL Maximum Output Level 13.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 16dBA Power Options P24 P48 Weight 101.00g Dimensions 118.00mmH x 20.00mmW x 20.00mmD Output XLR
€235,00
-
Rode RODE - RODE NT4 - X/Y Stereo Condenser Microphone
FEATURES Stereo X/Y condenser microphone Dual externally biased 1/2 capsules with gold sputtered diaphragm Capsules closely matched with full frequency response Dual power operation Custom stereo cables included - 5 pin stereo XLR, Minijack (Via included cable) and dual 3-pin XLR (via included cable) Custom twin head windshield (WS4) included Includes custom twin head windshield WS4, RC4 case and 5-pin Minijack and XLR stereo cables Surface mount circuitry 10 year extended warranty when you register your microphone The R˜DE NT4 stereo microphone offers a perfect X/Y stereo array without the need for matched pair microphones, complex stereo bars and equipment. Simply place the microphone and capture a realistic stereo field using a single microphone. Combining an acoustically matched pair of 1/2 cardioid condenser capsules fixed in a perfect 90 degree near-coincident alignment, the NT4 instantly creates a faithful stereo array that is ideal for drum overheads, percussion, choir vocals, environmental recording and sound design in a studio or in the field. The NT4's versatility is further extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm minijack cables are supplied to ensure the NT4 is ready to record to mixing console, portable recorder or camera. The R˜DE NT4 microphone is designed and made in Australia, and covered by R˜DE's industry leading 10 year warranty. ### SPECIFICATIONS Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.50" Polar Pattern Address Type End Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 143dBSPL Maximum Output Level 13.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 16dBA Power Options 9V P48 Weight 480.00g Dimensions 231.00mmH x 61.00mmW x 33.00mmD Output 3.5 XLR
€619,00
-
Rode RODE - RODE NT3 - 3/4" Cardoid Condenser Microphone
FEATURES True condenser externally biased 3/4 capsule Dual power operation Cast metal body with durable satin-nickel finish Transformerless output Internal capsule shock mounting High level of RF rejection Audio-grade surface mount components Full frequency response 10 year extended warranty when you register your microphone The NT3 is the definition of a studio workhorse. Featuring an end-address 3/4" gold-sputtered true-condenser transducer it provides incredible detail on almost any instrument you can imagine. Intended for studio, stage and location work, this versatile handheld, stand or boompole mounted microphone will give great results on drums, percussion, acoustic guitar, guitar amps, piano and all acoustic instruments as well as detailed voice reproduction when used as a handheld presentation microphone or indoor boom mic. For further versatility the NT3 can be powered by either P48 phantom power, or via a 9V battery for situations when power isn't available via the console or camera. Its rugged and durable all-metal body and mesh head ensure that it is well protected both in the studio and out in the field. The R˜DE NT3 microphone is designed and made in Australia, and covered by R˜DE's industry leading 10 year warranty. ### SPECIFICATIONS Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 0.75" Polar Pattern Address Type End Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 140dBSPL Maximum Output Level 9.5mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -39.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 16dBA Power Options 9V; P12; P24; P48 Weight 371.00g Dimensions 206.00mmH x 32.00mmW x 32.00mmD Output XLR
€275,00
-
Rode RODE - RODE Podcaster - USB Broadcast Microphone
FEATURES Broadcast Sound Quality 28mm dynamic capsule 18-bit resolution, 8-48kHz sampling Windows and Mac compatible Powered by USB bus Internal capsule shock mounting 3.5mm stereo headphone output with volume control built-in to body Ideal for voice recognition software 10 year extended warranty when you register your microphone The R˜DE Podcaster is a dynamic, end-address USB microphone that combines broadcast-quality audio with the simplicity of USB connectivity, allowing recording direct to a computer without the need for an additional digital interface. Including an audiophile quality 18-bit resolution, 48kHz sampling A/D converter, the Podcaster processes all of the analogue-to-digital conversion internally, bypassing the computer's lower quality on-board sound controller altogether. A headphone output on the microphone body provides zero-latency monitoring, so the user can hear exactly what is being recorded, free of delay or echo. The Podcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. It is fully compatible with Windows 7, Windows 8 and Mac OS X computers, as well as several Linux distributions. The microphone is bus powered and features a status LED to indicate operation. The Podcaster is ideal for podcasting, vodcasting, YouTube videos, voice recognition software, corporate videos and any production application that requires a simple yet professional voice-over microphone. It is also a convenient demo microphone for musicians and songwriters that prefer the convenience of a USB microphone but don't want to compromise sound quality. It can also be used as an iPad microphone for the Apple iPad (in conjunction with the iPad Camera Connection Kit and a powered USB hub) to provide high quality recording to various iPad audio applications such as Garageband. The Podcaster includes a sturdy RM2 microphone ring mount. For professional applications the optional PSM1 shock mount and PSA1 boom arm are highly recommended. The R˜DE Podcaster USB microphone is designed and made in Australia, and covered by R˜DE Microphones' industry leading 10 year warranty. ### SPECIFICATIONS Acoustic Principle Dynamic Active Electronics Analogue signal conditioning + A/D and USB interface Polar Pattern Resolution 24-bit Sampling Rate 44-96kHz Address Type End Frequency Range 40Hz - 14kHz Maximum SPL 115dBSPL Sensitivity -51.0dB re 1 Volt/Pascal (2.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz Power Options USB Weight 655.00g Dimensions 215.00mmH x 56.00mmW x 52.00mmD Output
€239,00
-
Rode RODE - RODE Procaster - Broadcast Quality Dynamic Microphone
FEATURES Broadcast quality sound High output dynamic capsule Balanced, low impedance output Internal shock mounting of capsule for low handling noise Internal pop-filter to reduce plosives Robust, all-metal construction 10 year extended warranty when you register your microphone The R˜DE Procaster is a professional broadcast quality dynamic microphone, specifically designed to offer no-compromise performance for voice applications in the broadcast environment. Featuring a tight polar pattern and tailored-for-voice frequency response, the Procaster is perfect for every application where a great sounding, robust microphone with superior ambient noise rejection is demanded. The Procaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. Its high output dynamic capsule and balanced low impedance output make it an ideal broadcast and voice over microphone. The R˜DE Procaster microphone is designed and made in Australia, and covered by R˜DE Microphones' industry leading 10 year warranty. ### SPECIFICATIONS Acoustic Principle Dynamic Polar Pattern Address Type End Frequency Range 75Hz - 18kHz Output Impedance 320Ω Sensitivity -56.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Weight 745.00g Dimensions 214.00mmH x 53.00mmW x 53.00mmD Output XLR
€239,00
-
Rode RODE - RODE NTG-8 - RF-bias Long Shotgun Microphone
Features Superior broadcast sound quality High Sensitivity Super-cardioid polar pattern Highly directional polar response Natural sounding audio both on and off-axis Designed to withstand adverse environmental conditions Extremely low handling noise High level of immunity to radio frequency interference True Condenser (external RF biased) Includes weatherproof aluminium cylinder for transport, SM8 shock mount and wind shield 10 year extended warranty when you register your microphone Based on R˜DE's award winning NTG3 shotgun microphone, the NTG8 is a broadcast quality RF-bias shotgun microphone that exhibits increased directionality across a wide frequency response range. This makes the NTG8 the perfect microphone for film, television, sports and outdoor broadcasting, live performance, and any professional distance miking application. Like the NTG3, the NTG8 features low self-noise, natural sound without colouration both on and off-axis, and RF bias technology to ensure that it is almost completely resistant to high humidity environments which could cause other condenser microphones to fail. The NTG8 is finished in matte black and supplied with a specially designed shock mount (SM8) that is engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the microphone. A rugged weatherproof aluminium cylinder is also included, providing ultimate protection for the microphone when in transport or storage. The WSNTG8 windshield completes the package, providing light environmental protection. The R˜DE NTG8 long shotgun microphone is designed in Australia and covered by R˜DE Microphones' industry leading 10 year warranty. ### Specifications Acoustic Principle Line Gradient Active Electronics RF Bias Capsule 0.50" Polar Pattern Address Type End Frequency Range 40Hz - 20kHz Output Impedance 25Ω Maximum SPL 124dBSPL Maximum Output Level 8.2mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -20.0dB re 1 Volt/Pascal (97.50mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 8dBA Power Options P48 Weight 345.00g Dimensions 559.00mmH x 19.00mmW x 19.00mmD Output XLR
€1.199,00
-
Rode RODE - RODE K2 - Variable Pattern Dual 1" Condenser Valve Microphone
The R˜DE K2 is a premium valve condenser microphone featuring dual 1 gold sputtered diaphragms. Infinitely variable control of the polar pattern from omnidirectional through cardioid and bidirectional/figure-8 provides the freedom and flexibility to excel in any recording situation. High-performance specifications (including a maximum SPL of 162dB) are combined with the character and subtleties of the legendary mics of the 1950s to provide a microphone that not only provides world-class vocals but is perfectly at home recording a wide range of instruments both up-close or in a wider 'room' capacity. The R˜DE K2 microphone is designed and made in Australia, and covered by R˜DE Microphones' industry leading 10 year warranty. Large 1" capsule with gold sputtered diaphragm and internal shock mounting Ultra low noise Wide dynamic range Class 'A' valve circuitry Hand-selected and graded 6922 twin-triode valve Dedicated Power Supply High strength welded and heat-treated steel mesh head Continuously variable polar patterns. From omni, through cardioid to figure 8, controlled at the power supply. 10 year extended warranty when you register your microphone ### Acoustic Principle Pressure Gradient Active Electronics Valve/tube impedance converter with bipolar output buffer Capsule 1.00" Polar Pattern Address Type Side Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 162dBSPL Maximum Output Level 30.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 10dBA Power Options PSU Weight 815.00g Dimensions 208.00mmH x 55.00mmW x 55.00mmD Output XLR ### 1x K2 1x SM6 shock mount 1x RM2
€849,00
-
Rode RODE - RODE NTG-4+ - Directional Condenser Microphone with Inbuilt Battery
FEATURES Broadcast sound quality Low noise circuitry Internal rechargeable lithium battery, supplying over 150 hours operation Fully charged in under two hours via MicroUSB Rugged metal construction Convenient digital switching High Frequency Boost High Pass Filter (Flat/75Hz) PAD (-10db) MicroUSB cable included 10 year extended warranty when you register your microphone Building on the popularity and acceptance of the R˜DE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching. The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging. ### Acoustic Principle Line Gradient Capsule 0.50" Polar Pattern Address Type End Frequency Range 20Hz - 20kHz (selected HPF @75Hz) Output Impedance 200Ω Maximum SPL 135dBSPL Sensitivity -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 16dBA Power Options Weight 176g Dimensions 278mmH x 22mmW x 22mmD Output XLR
€325,00
-
Rode RODE - RODE NTK - Valve 1" Condenser Microphone
The R˜DE NTK is a premium valve condenser microphone designed to provide incredible detail and warmth in the studio. Its cardioid polar pattern is perfect for most single instrument recording scenarios. The electronic circuitry complementing this very sensitive transducer includes a hand-selected twin-triode 6922 valve and audiophile grade components. The result is an ultra-wide dynamic range, low noise, and stunning tube warmth. The NTK's rich valve sound is ideal for vocals, acoustic instruments, drum overheads, guitar amps and pianos. The R˜DE NTK microphone is designed and made in Australia, and covered by R˜DE Microphones' industry leading 10 year warranty. FEATURES Large 1 capsule with gold plated diaphragm Class valve circuitry Hand selected and graded 6922 twin-triode valve Dedicated power supply Internal capsule shock mounting High level of RF rejection Ultra low noise Wide dynamic range High strength heat treated steel mesh head 10 year extended warranty when you register your microphone ### Acoustic Principle Pressure Gradient Active Electronics Valve/tube impedance converter with bipolar output buffer Capsule 1.00" Polar Pattern Address Type Side Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 158dBSPL Maximum Output Level 29.0mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -38.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 12dBA Power Options PSU Weight 760.00g Dimensions 208.00mmH x 55.00mmW x 55.00mmD Output XLR
€699,00
-
Rode RODE - RODE M5-matched pair - Compact 1/2" Condenser Microphone
Designed and made in Australia, the M5 is a compact ½ cardioid condenser microphone with low noise and a full frequency response. A result of many years' experience building the award-winning NT5 microphone, R˜DE has succeeded in making a high-quality 'pencil' style permanently polarized condenser that will impress even the most demanding of artists and engineers. Ideal for studio recording and live on stage, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array. This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. A premium foiled certificate is supplied to verify the authenticity of the pair. The M5 is finished with R˜DE's proprietary ceramic coating which offers a sleek matt black finish, and is supplied with WS5 windshields and RM5 stand mounts. 1„2 capsule with gold-plated membrane Cardioid polar pattern All metal body Ultra-low noise State-of-the-art surface mount electronics Includes microphone clips and windshields 10 year extended warranty when you register your microphone ### SPECIFICATIONS Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Polar Pattern Frequency Range 20Hz ~ 20kHz Output Impedance 200Ω Equivalent Noise 19 dBA SPL (as per IEC651) Maximum Output Level +13.5 dBu Sensitivity -34 dB re 1V/Pa (20mV @ 94 dB SPL) ± 2dB @ 1kHz Dynamic Range 121 dB SPL Maximum SPL 140 dB SPL Signal to noise Ratio 75 dBA SPL (as per IEC651) Power Requirements 24V phantom power 48V phantom power Output Connection 3 Pin XLR Balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground) MECHANICAL SPECIFICATION Weight (g) 80.00g Dimensions 100.00mmH x 20.00mmW x 20.00mmD
€215,00
-
Rode RODE - RODE M1-Switch - Dynamic Microphone with Lockable Switch
With rock-solid build quality and a high-power neodymium capsule, the R˜DE M1-S switchable live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a ten year warranty. The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone's internal design. Featuring a warm response that is incredibly defined for a dynamic microphone, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback. The addition of an on/off switch adds versatility for artists, engineers and presenters that prefer control while on stage. A flush-mounted lock ensures the microphone cannot be accidentally switched. For additional security the M1-S features an XLR lock that can be used to fix the microphone to the cable. Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion. FEATURES Live dynamic vocal microphone High output neodymium capsule Cardioid polar pattern Lockable on/off switch XLR security lock Ergonomically designed heavy duty all-metal body Low handling noise 10 year extended warranty when you register your microphone ### Acoustic Principle Dynamic Address Type End Frequency Range 75Hz - 18kHz Output Impedance 320Ω Sensitivity -56.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz Weight 360.00g Dimensions 171.00mmH x 51.50mmW x 51.50mmD
€129,00
-
Rode RODE - RODE Stereo Videomic X - Broadcast-grade stereo on-camera microphone
The Stereo VideoMic X is the ultimate broadcast-grade stereo microphone for on-camera use. Utilising all-metal construction, it is incredibly robust making it ideal for regular professional use, while also providing high levels of resistance to RF interference. The mic features a matched pair of ½ true-condenser capsules, configured in a stacked X-Y configuration, providing a highly-immersive soundscape. Each capsule is supported by the Rycote® Lyre® shock-mounting system, providing isolation from vibration as well as knocks and bumps. Digital switching on the rear of the SVMX allows the user to control the level adjustment (-10dB or +20dB), high-pass filter (0/75/150Hz) and an innovative high-frequency boost (+6dB @ XHz) designed to boost the intelligibility of dialogue. In a first for the VideoMic range, professional-grade balanced outputs are available on the side of the body, in addition to the RF shielded 3.5mm stereo output cable. An outer dome structure provides physical protection for the sensitive capsules, while reducing wind noise in the same manner as R˜DE's RedDot-winning Blimp. FEATURES Acoustically matched true condenser capsules Rycote® Lyre onboard shock mounting Balanced professional XLR output Heavy-duty, lightweight aluminium construction High Pass Filter 9V or Phantom Power (P48 - via miniXLR) Level adjustment High Frequency Boost Includes SC2 TRS cable, pop shield and wind shield 10 year extended warranty when you register your microphone ### Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter Capsule 0.50" Polar Pattern Address Type End Frequency Range 40Hz - 20kHz Output Impedance 200Ω Maximum SPL 143dBSPL Sensitivity -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 12dBA Power Options 9V; P48 Weight 300g Dimensions 102mmH x 118mmW x 100mmD Output 3.5; MINI-XLR ### Rode Stereo VideoMic X SC2 3.5mm TRS cable Pop Shield Windshield
€695,00