The SWIT S-1071F 7" On-Camera Monitor incorporates a 7" FFS (Fringe Field Switching) LCD panel with a 1024 x 600 resolution, 900:1 contrast ratio, and 400 cd/m² brightness with an LED backlight. A variety of monitoring features includes waveform, audio meters, and front and back tally lights.
FFS is an advanced technology that provides for wide viewing angles while allowing for superior performance and high image quality. Although at 160°, the viewing angle of this monitor is not the highest it could be, and this is due to the monitor being designed with its screen sunk into the frame.
The S-1071F offers a comprehensive array of connections on the rear panel. It features dual HD/SD-SDI inputs and loop-through outputs, HDMI input and loop-through output, a separate SDI output for built-in HDMI to SDI conversion, CVBS input on BNC, and a 9-pin tally input. There's also a 3.5mm headphone jack on the front. The monitor has a 4-pin XLR port for power, and supports Gold Mount and V-Mount battery plates (models S-7005A and S-7005S), as well as snap-on DV plates (models S-7004F/P/J/C/U/E/B/V), all available separately from SWIT.
There are 1/4"-20 mounting threads on the bottom, left, and right. You can also use the optional S-7360 dual monitor stand to mount two S-1071F monitors on cranes. As part of the Luxury Package, many accessories are supplied with the monitor. You get a power adapter, shoe mount, sun hood, screen protection film, HDMI and D-Tap-to-XLR cables, an extension arm trestle, and a carrying case. The sun hood secures with thumbscrews from the sides or can be attached using optional touch fasteners.
A lineup of front panel controls includes three assignable function buttons, waveform and vectorscope buttons, a volume dial, and more.
Monitoring Features
Waveform
Vectorscope
RGB histogram
Audio meter
SDI timecode
Pixel-to-pixel
Peaking focus assist
Zebra stripes
False Color
Blue only
DSLR scale zoom-in
Safe area and scale marker
Image flip
Three-color tally light
Built-In HDMI to SDI Conversion
A separate SDI output is available for broadcasting the HDMI to SDI conversion signal. It supports up to 1080p30.
SDI & HDMI Waveform Display
The waveform can be displayed for both SDI and HDMI signals. It includes YCbCr and RGB channels, and full-scale display of each channel. Vectorscope and RGB histogram can be switched on and off independently of the waveforms.
SDI & HDMI Audio Meter
The monitor displays SDI and HDMI embedded audio level meters, and supports full 16-channel meters for an HD-SDI input, and two channels for SD-SDI or HDMI input. The audio meter is green, turns yellow when it exceeds -20dB, and red when exceeding -9dB. The channel 1 and channel 2 embedded audio can be output via the 3.5mm headphone jack.
Focus Assist
In Focus Assist mode, the subject in focus will be sketched out by red or blue lines. This feature is also available during image zoom-in.
User-Editable Video Title
You can edit a video title for the current camera, and the title will display on top of the screen.
Three-Color Tally Light
"Live" signals are provided to people in front of the camera, and also to the camera operator.
Simple package includes
Hood
coldshoe stand
LCD protector
Luxury package has additional
Carrying case
HDMI cable
Extension rods
D-tap to 4-pin XLR cable
The SWIT S-1073F Monitor adopts a 7" TFT LCD panel with optical bonding technology. The LCD offers a native resolution 1920 x 1200 and 160° wide viewing angle. It features two 3G-SDI (Level A/B) input, one HDMI input, and one CVBS input. It also features one SDI output (SDI loop through output/HDMI converted to SDI output), one HDMI output, and one headphone and speaker audio output. The monitor is suitable for outdoor on-camera video monitoring thanks for the aluminum alloy housing and foldable sun hood. It supports 6.5 to 36 VDC input via a 5.5mm lockable DC socket, and comes installed with a S-7006S V-Mount battery plate to power the V-mount batteries. The monitor supports video analysis assistant patterns including Waveform (Y/Pb/Pr/R/G/B), Vectorscope, and Histogram (R/G/B/Y) to convert the digital video quality info (Luma, Color, Saturation, etc.) into patterns, and it has select display position (Up/Down/Left/Right), size, color, and translucence. The patterns can be switched on/off individually.
The S-1073F monitor offers 16-channel (SDI), 8-channel (HDMI), and 2-channel (analog audio) audio meter displays, with marks and abnormal audio alert info. It allows you to select any two channels audio to output via 3.5mm socket or speakers. The audio meter pattern position can be selected from one of four corners, and can be selected to display only 2 channels, 8 channels, or full 16 channels. The scale markers, alert info, and translucent of the audio meter pattern are also selectable. The monitor also supports GPI control input via rear RJ45 (RS-485) port allowing you to define the functions for each GPI pins, including Red/Green/Yellow Tally signals. The monitor screen displays soft Tally signal, which flashes as Red/Green/Yellow according to the GPI settings.
The monitor has a revolve/push menu button with one-button operation for the menu system. It also features four F1 to F4 user-definable function keys that allow you to preset a function with a long press. These keys support functions like audio meters, histogram, false color, AFD, H/V delay, R/G/B/Mono, scale markers, colorbar, UMD, audio alert, max backlight, peaking focus assist, aspect ratio, scan mode, zoom mode, mute, freeze frame, flip, waveform, color temperature, timecode, zebra, and vectorscope. The monitor provides a standard USB port on the side for firmware upgrades.
FEATURES
7 non-glaring LCD, 1920—1200 FHD
Optical bonding LCD panel
All metal housing, thinner and robust
2K/3G/HD/SD-SDI input and loop out
HDMI input, loop out, converted to SDI out
16-ch Embedded audio meters with alert
Select any 2 audio channels to output
Waveform Y/Cb/Cr/R/G/B and single line
Vector scope, histogram R/G/B/Y
Peaking focus assist (dual color)
AFD, timecode, H/V delay, Zebra stripes
Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1
False color, R/G/B/Mono, 100% colorbar
GPI control and soft Tally display
V / Gold mount and various DV plate install
USB firmware upgrade
SPECIFICATIONS
LCD Performance
Size
7 inches
Display area
151.2—94.5mm
Resolution
1920—1200
Aspect ratio
16:9 (4:3 adjustable)
Brightness
400cd/m2
Contrast
1000:1
Color
16.77 million colors
Viewing angle
Horizontal: 160°Vertical: 160°
Input
BNC —2
2K/3G/HD/SD-SDI input
BNC —1
CVBS input
HDMI —1
HDMI 1.3 input
3.5mm —1
Analog audio input
USB —1
Firmware upgrade
Output
BNC —1
2K/3G/HD/SD-SDI loop output or HDMI converted to SDI output
HDMI —1
HDMI 1.3 loop output
3.5mm —1
SDI, HDMI embedded audio output and analog audio output
Video Format
SDI
SMPTE 2048-2
2048—1080p (23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60)
2048—1080i (50 / 59.94 / 60)
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
HDMI
480i/ 576i / 480p / 576p
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
CVBS
PAL / NTSC
General
Working voltage
DC / battery 6.5V-36V
Power consumption
12W
Working temperature
-10°C~+50°C
Working humidity
10%~90%
Storage temperature
-15°C~+60°C
Storage humidity
10%~90%
Dimensions
184—120—33mm
Net weight (main body)
610g
Simple package includes
Metak housing
USB upgrade
Luxury package has additional
Carrying case
HDMI cable
Extension rods
D-tap to 4-pin XLR cable
The SWIT S-1093F 9 Full HD Waveform LCD Monitor features a 1920 x 1200 resolution IPS LCD panel with 2K/3G/HD/SD-SDI and HDMI inputs. It provides broadcast technical reference patterns, waveform, vectorscope, histogram, up to 16-channel audio meters with alerts, and you can select any 2-channel audio for output. Moreover, the peaking focus assist, false color, R/G/B/Mono, H/V delay, UMD, AFD, and scale markers are useful functions for broadcast field and studio monitoring. It comes with a set of eight interchangeable battery plates, making it compatible with various batteries from Sony, Panasonic, Canon, JVC, and SWIT. The monitor can also be powered using the included D-Tap to 4-pin XLR DC cable.
Features
9 IPS LCD, 1920—1200, H/V 170°viewing
Build-in LCD protective glass
2K/3G/HD/SD-SDI, HDMI, CVBS monitoring
16-ch Embedded audio meters with alert
Select any 2 audio channels to output
Waveform Y/Cb/Cr/R/G/B and single line
Vector scope, histogram R/G/B/Y
AFD, H/V delay, R/G/B/Mono, False color
TSL UMD and text TALLY display
Zebra stripes, Peaking focus assist
SDI timecode display
Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1
Front / Rear TALLY light and GPI control
V-mount, Gold mount or snap-on DV mount
USB firmware upgrade
Specifications
LCD Performance
Size
9 inches
Display area
191.52—119.70mm
Resolution
1920—1200
Aspect ratio
16:9 (4:3 adjustable)
Brightness
450cd/m2
Contrast
800:1
Color
16.77 million colors
Viewing angle
Horizontal: 170°Vertical: 170°
Input
BNC —2
2K/3G/HD/SD-SDI input —2
BNC —1
Composite input
HDMI —1
HDMI input
3.5mm —1
Analog audio input
Output
BNC —2
2K/3G/HD/SD-SDI loop output —2
BNC —1
Composite loop output
HDMI —1
HDMI loop output
3.5mm —1
SDI, HDMI, Analog audio output
Video Format
CVBS
NTSCˆ•PAL
SDI
SMPTE ST 2048-1: 2011
2048—1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
HDMI
480i/ 576i / 480p / 576p
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)1080psf (30 / 29.97 / 25 / 24 / 23.98)
General
Working voltage
DC / battery 6.5V-24V
Power consumption
¤18W
Working temperature
0°C~+40°C
Working humidity
10%~90%
Storage temperature
-15°C~+60°C
Storage humidity
10%~90%
Dimensions
241—178—52mm
Net weight (main body)
960g
Simple package includes:
Sunhood
Coldshoe stand
Luxury package has additional:
Carrying case
HDMI cable
arm trestle
D-tap to 4 pin XLR cable
The S-1173F Broadcast Studio LCD Monitor from SWIT adopts a 17.3 LCD panel to produce 3G/SDI/HDMI video in Full HD 1920 x 1080 resolution. It provides a 700:1 contrast for accurate color reproduction and comes with a Gold Mount battery plate. With four corners and a large center display position, the monitor allows for adjusted translucence for waveform and vectorscope/histogram.
FEATURES
17.3 LCD panel
1920 x 1080 resolution
2 x 2K/3G/HD/SD-SDI, HDMI monitoring
Y/Pb/Pr, VGA, CVBS monitoring
2-channel embedded audio meters with alert
2 selectable audio channels to output
Waveform Y/Cb/Cr/R/G/B and single line
Vectorscope, histogram R/G/B/Y
Peaking focus assist (red/blue switch)
Active Format Description (AFD)
Timecode, H/V delay
TSL UMD and text TALLY display
Safety marker 4:3/13:9/14:9/15:9/1.85:1/2.35:1
False color with color chart
R/G/B/mono color modes
Over exposure zebra stripes
Internal color bar
Gold Mount battery plate
19 rack installation, 7U height
USB firmware upgrade
SWIT S-1173 Specs
Signal System NTSC/PAL
Monitor Type LCD
Screen Size 17.3" (43.9 cm)
Resolution 1920 x 1080
Display Area 15 x 8.6" (38 x 22 cm)
Display Colors 16.7 million colors
Viewing Angle H/V: 160°/ 160°
Brightness 300 cd/m2
Contrast Ratio 700:1
Aspect Ratio 16:9 / 4:3
Inputs BNC: 2 x 2K/3G/HD/SD-SDI input, 1 x CVBS input, 1 x Y/Pb/Pr input
1 x HDMI
RS-485: 1 x GPI, 1 x UMD
1 x USB
1 x VGA
1 x RS-232C (UMD)
RCA: 2 x L/R audio input
Outputs BNC: 2K/3G/HD/SD-SDI Loop output, 1 x CVBS loop output
1 x HDMI loop output
1 x RS-485 (UMD)
1 x 3.5 mm SDI/HDMI embedded audio output, analog audio output
Video Formats SDI:
SMPTE ST 2048-1: 2048 x 1080p (60/59.94/50/30/29.97/25/24/23.98), 2048 x 1080i (60/59.94/50)
SMPTE-425M: 1080p (60/59.94/50)
SMPTE-274M: 1080p (30/29.97/25/24/23.98), 1080i (60/59.94/50)
SMPTE-RP211: 1080psf (30/29.97/25/24/23.98)
SMPTE-296M: 720p (60/59.94/50)
SMPTE-125M: 480i (59.94)
ITU-R BT.656: 576i (50)
HDMI:
1080p (60/59.94/50/30/29.97/25/24/23.98)
1080i (60/59.94/50)
720p (60/59.94/50)
480i/576i/480p/576p
Y/Pb/Pr: 1080p (50/60)/1080i (50/60)/720p (50/60)/576p/576i/480p/480i
VGA: 1600 x 1200/1280 x 1024/1280 x 960/1280 x 768/1152 x 864/1024 x 768/800 x 600/640 x 480
Temperature Working: 32 to 104°F (0 to +40°C)
Storage: 5 to 140°F (-15 to +60°C)
Humidity 10 to 90%
Power Requirements 100 to 240 VAC, 11 to 17 VDC
Power Consumption ¤32 W
Dimensions 1.7 x 1.2 x 0.3" (43 x 31 x 7.3 cm)
Weight 10.2 lb (4.65 kg)
The 21.5" Full HD Waveform Studio LCD Monitor from SWIT adopts an IPS (In-Plane Switching) LCD panel with full HD resolution. It also features an LED backlight, 1000:1 contrast for accurate color reproduction, and a viewing angle of 178°. The supported video analysis assistant patterns include: Waveform (Y/Pb/Pr/R/G/B), Vectorscope and Histogram (R/G/B/Y). For convenience, the patterns can be switched on/off individually.
The monitor can display SDI 16-channel and HDMI 8-channel embedded audio meters with marks and audio abnormal alert info. Users can also select any 2 channels audio to output to the internal speakers or via the 3.5 mm audio output jack. The audio meter pattern position can be selected from Up/Down/Left/Right, and you can select to display 2 channels, 8 channels or 16 channels. It supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection; up to 8 letters can be displayed.
The monitor provides a standard USB port for firmware upgrade. You can download the latest firmware file to a USB stick, and directly insert it into the monitor to upgrade; no computer needed. For power, it provides a 4-pin XLR jack for 11-17 VDC, and a Gold-Mount battery plate enables outdoor using. There are three colors for the Tally light: Red, Green and Yellow.
FEATURES
21.5" LCD panel, 1920 x 1080 resolution
2K/3G/HD/SD-SDI (x2), HDMI monitoring
Y/Pb/Pr, VGA, CVBS monitoring
16-channel embedded audio meters with alert
Select any 2 audio channels to output
Waveform Y/Cb/Cr/R/G/B and single line
Vectorscope, Histogram R/G/B/Y
Peaking focus assist (red/blue switch)
AFD, timecode, H/V delay
TSL UMD and text TALLY display
Safety marker 4:3/13:9/14:9/15:9/1.85:1/2.35:1
False color, R/G/B/Mono, zebra stripes, internal color bar
USB firmware upgrade
The 23.8" Full HD Waveform Studio LCD Monitor from SWIT adopts an IPS (In-Plane Switching) LCD panel with full HD resolution. It also features an LED backlight, 1000:1 contrast for accurate color reproduction, and a viewing angle of 178°. The supported video analysis assistant patterns include: Waveform (Y/Pb/Pr/R/G/B), Vectorscope and Histogram (R/G/B/Y). For convenience, the patterns can be switched on/off individually.
The monitor can display SDI 16-channel and HDMI 8-channel embedded audio meters with marks and audio abnormal alert info. Users can also select any 2 channels audio to output to the internal speakers or via the 3.5 mm audio output jack. The audio meter pattern position can be selected from Up/Down/Left/Right, and you can select to display 2 channels, 8 channels or 16 channels. It supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection; up to 8 letters can be displayed.
The monitor provides a standard USB port for firmware upgrade. You can download the latest firmware file to a USB stick, and directly insert it into the monitor to upgrade; no computer needed. For power, it provides a 4-pin XLR jack for 11-17 VDC, and a Gold-Mount battery plate enables outdoor using. There are three colors for the Tally light: Red, Green and Yellow.
23.8" LCD panel, 1920 x 1080 resolution
2K/3G/HD/SD-SDI (x2), HDMI monitoring
Y/Pb/Pr, VGA, CVBS monitoring
16-channel embedded audio meters with alert
Select any 2 audio channels to output
Waveform Y/Cb/Cr/R/G/B and single line
Vectorscope, Histogram R/G/B/Y
Peaking focus assist (red/blue switch)
AFD, timecode, H/V delay
TSL UMD and text TALLY display
Safety marker 4:3/13:9/14:9/15:9/1.85:1/2.35:1
False color, R/G/B/Mono, zebra stripes, internal color bar
USB firmware upgrade
SPECIFICATIONS
LCD Performance
Size
23.8inches
Display area
527.04—296.46mm
Resolution
1920—1080
Aspect ratio
16:9 (4:3 )
Brightness
250cd/m2
Contrast
1000:1
Color
16.77 million colors
Viewing
178°(H)ˆ•178°(V)
Input
BNC —2
2k/3G/HD/SD-SDI input—2
BNC —1
CVBS input
BNC —3
Y/Pb/Pr input
HDMI —1
HDMI input
RS485 —2
GPI—1, UMD—1
RS232C —1
UMD
VGA —1
VGA input
3.5mm RCA
L/R audio input
USB —1
USB input (firmware upgrade)
Output
BNC —2
2K/3G/HD/SD-SDI Loop output
BNC —1
CVBS Loop output
HDMI —1
HDMI Loop output
RS485 —1
UMD—1
3.5mm —1
SDI/HDMI embedded audio output, analog audio output
Video Format
CVBS
NTSCˆ•PAL
SDI
SMPTE ST 2048-1: 2011
2048—1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
SMPTE-425M
1080p (60 / 59.94 / 50)
SMPTE-274M
1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211
1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M
720p (60 / 59.94 / 50)
SMPTE-125M
480i (59.94)
ITU-R BT.656
576i (50)
HDMI
480i/ 576i / 480p / 576p
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
Y/Pb/Pr
480i/ 576i / 480p / 576p, 720p (50/60), 1080i (50/60), 1080p (50/60)
VGA
640—480 / 800—600 / 1024—768 / 1152—864 / 1280—768
1280—960 / 1280—1024 / 1600—1200
General
Working voltage
AC: 100V-240V DC: 11V-17V
Power consumption
¤32W
Working temperature
0°C~+40°C
Working humidity
10%~90%
Storage temperature
-15°C~+60°C
Storage humidity
10%~90%
Dimensions
576—387—87mm
Net weight (w/o stand)
7.2kg
Met verbeterde functies en gebruikersinterface kan de Shimbol Memory I Pro 5,5" HDMI & 3G-SDI touchscreen recorder/monitor tot DCI 4K25 HDMI of 1080p60 3G-SDI video opnemen en bekijken met toegepaste custom 3D LUT's. De Pro-monitor is voorzien van een 5,5" 1920 x 1080 touchscreen-display met een kijkhoek van 178°, een contrastverhouding van 1200:1 en een helderheid van 2000 cd/m² voor betere zichtbaarheid, zelfs in fel zonlicht. De Memory I Pro heeft HDMI- en 3G-SDI-ingangen en -uitgangen, een USB-C-poort, een 3,5 mm hoofdtelefoonaansluiting en een SD-kaartsleuf voor opname. Er kunnen meerdere visuele hulpfuncties worden geschakeld met de verbeterde gebruikersinterface en touchscreenbediening.
HDMI en 3G-SDI dubbele interfaces
HDMI-ingang/uitgang, 3G-SDI-ingang/uitgang
Ondersteunt tot DCI 4K25 HDMI-video en 1080p60 3G-SDI-video
Converteer 3G-SDI-ingangen naar HDMI-uitgangen
Voeg 3D LUT toe aan uw video output
Verbeterde gebruikersinterface voor intuïtieve bediening
Nieuwe pictogrammen op het touchscreen-display zorgen voor eenvoudiger en snellere toegang tot gewenste functies zoals scopes, opnamefuncties, frame guides, afspelen, beeld omdraaien en andere instellingen. Dit zorgt voor een soepele monitoring in het veld.
3D LUT importeren en uitvoeren
Upload custom 3D LUT's in .cube-formaten naar de monitor of gebruik presets om uw eindproduct beter te visualiseren tijdens de opname.
Opnemen en afspelen
Ondersteunt opnemen en afspelen met 3D LUT's
Ondersteunt real-time HDMI- en 3G-SDI-opnamen
Ingebouwde speler voor directe weergave
SD-kaartsleuf ondersteunt opnames tot 1080p60
32 tot 256 GB kaarten ondersteund, interne formattering
MP4-bestandsformaten compatibel met Da Vinci, iMovie en andere bewerkingsplatforms
Aangepaste RGB-instellingen
Pas uw RGB-instellingen aan voor een betere schermweergave en kleurcorrectie. Pas parameters zoals RGB-versterking en offset aan.
Andere visuele ondersteuningsfuncties
Focus Peaking
Zeer nauwkeurige waveform
False Color
Maskeren met aangepaste schermverhoudingen
Aanpassing van de kleurtemperatuur
###
Display
Panel Type
LCD
Display Size
5.5" / 14.0 cm
Resolution
1920 x 1080
Aspect Ratio
16:9
Viewing Angle
Horizontal: 178°Vertical: 178°
Touchscreen
Yes
Maximum Brightness
2000 nits / cd/m2
Contrast Ratio
1200:1
HDR Compatibility
Hybrid Log Gamma
Pixels Per Inch (ppi)
400 ppi
Image Controls
Check Field, Color Temperature Selection, Customizable Aspect Ratios, False Color, Image Flip, Screen Markers, Waveform, Zebra
Inputs / Outputs
Video I/O
1 x HDMI 1.4 Input1 x BNC (3G-SDI) Input1 x HDMI 1.4 Output1 x BNC (3G-SDI) Output
Audio I/O
1 x 1/8" / 3.5 mm Headphone Output
Built-In Speaker
No
Power I/O
1 x Barrel Input
Other I/O
1 x USB-C (Firmware)
Media/Memory Card Slot
Single Slot: SD/SDHC/SDXC
Wi-Fi
No
Bluetooth
No
Mobile App Compatible
*As of July, 2023: Check with manufacturer for the most up-to-date compatibility
Format Support
Video Format
HDMIDCI 4K: 25/24/23.98 UHD 4K: 30/29.97/25/24/23.98 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 SDI1080p: 60/59.94/50/30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50
Gamma Curve
Rec709
Timecode Support
Yes
Recording
Pulldown Conversion
No
Camera Trigger
SDI, HDMI
Pre-Roll Record
No
Encoding Formats
Up to 1920 x 1080H.264 at up to 60 fps
Power
DC Input Power
6.5 to 16.8 VDC
Built-In Battery
No
Battery Type
1 x L-Series
Power Consumption
12 W
Mounting
Mounting
2 x 1/4"-20 Female
Environmental
Operating Temperature
14 to 104°F / -10 to 40°C
Storage Temperature
-4 to 140°F / -20 to 60°C
General
Material of Construction
Aluminum
Dimensions
5.8 x 3.4 x 1" / 146.6 x 87.6 x 26.5 mm
Weight
11.3 oz / 320 g
###
Shimbol Memory I Pro
Cold Shoe Adapter
SD-kaart
Gehard Screen Protector
HDMI kabel
SDI-kabel
Matthews biedt nu de sterkste, meest veelzijdige en compacte monitorbevestiging die er is. De mount is CNC gefreesd uit 6061 T-6 aluminium.
Omdat het geen gietstuk is, ondersteunt deze beugel elk formaat monitor tot een gewicht van 30 kg.
Werkt met lichtstatieven, C-stands of ieder ander type bevestiging met een 5/8" babypin. Het kan plat worden opgevouwen voor opslag en transport.
De mount is voorzien vergrendelbare pan en tilt functie, voor het instellen van de kijkhoek. De tilt kan tot een hoek van 45° worden versteld.
In de doos:
Matthews Monitor Mount
De Lilliput BM281-4KS is een 28-inch field monitor met echte 4K resolutie (3840 x 2160 pixels) professioneel 10-bit IPS paneel voor de beste beeldkwaliteit bij 300 cd helderheid.
De monitor heef een beelddiagonaal van meer dan 71 cm, 3G-SDI en HD-SDI, DVI en 4 x HDMI inputs. Het werkt op V-Mount batterijen of met de meegeleverde voeding. De monitor wordt geleverd in een stevige flightcase.
De Lilliput BM281-4KS is het juiste apparaat voor iedereen die een 7-10 inch monitor net te klein vindt. De Lilliput BM280-4K biedt een groot 71 cm (28 inch) scherm met een zeer scherpe native resolutie van 3840x2160 pixels. Dankzij de IPS-technologie geeft het scherm niet alleen de kleuren goed weer, maar is het ook stabiel in kijkhoeken.
De functies in een oogopslag
Professionele videomonitor voor regie, montage, studio of veldgebruik
Helder en scherp beeldscherm met een schermgrootte van 71 cm
Ware resolutie van 3840 x 2160 pixels maakt native weergave van 4K mogelijk
IPS technologie zorgt voor goede contrasten en kleuren die correct worden weergegeven, ongeacht de kijkhoek
Nauwkeurige kalibratie via RGB-controller mogelijk
Video ingangen voor 4 x HDMI (1 x 4K of 4 x HD), VGA, DVI en HDSDI / SDI In / Out
HDMI ingang 1 en 2 met HDMI 2.0 zijn 4K in 25/30/50/60 HZ mogelijk
HDMI ingang 3 en 4 met HDMI 1.4 zijn 4K met 25/30 Hz mogelijk
SDI ingang met 3G/HD-SDI tot 50/60Hz
Consistente 10bit kleurverwerking (informatie van de fabrikant)
SDI kan worden doorgelust (passthrough)
De beeldverhouding van het beeld kan worden aangepast in het menu (bijvoorbeeld voor in anamorfe cinemascope producties)
Aansluiting voor hoofdtelefoon via 3,5mm jack
VESA 100x100 gaten voor muurbeugel of C-stand mount aan de achterkant
Stevige flightcase inbegrepen
Zonnescherm voor gebruik buitenshuis en in sterk verlichte studio's
Werking op netstroom of via batterijen (Sony V-Mount)
Tally aansluiting via 9pins SUBD
Weergave van de ingangssignalen:
1 ingang in volledig scherm
2 ingangen links/rechts
2 ingangen omhoog/omlaag
2 ingangen PiP
4 ingangen Quadview
###
Beeldschermdiagonaal: 71,12 cm (28 inch)
Resolutie: 3840 x 2160 pixels
Schermtype: gedeeltelijk ontspiegeld
Kleurdiepte: 10-bits
Helderheid: 300 cd/m²
Contrast: 1000:1
Kijkhoek: 170° horizontaal 160° verticaal
Bedrijfsspanning: 12 tot 24V
Stroomverbruik: maximaal 48 watt
Ingangen: 1x HD-SDI, 4x HDMI, 1x SDI + audio, 1x VGA, 2 x audio RCA
Uitgangen: 1x HD-SDI
HDMI ingang 1 HDMI 2.0 4K in 25/30/50/60 HZ mogelijk
HDMI ingang 2-4 HDMI 1.4K met 25/30 Hz mogelijk
Full HD 1920x1080, HD1 1280x720 op alle HDMI en SDI aansluitingen
Afmetingen (LxBxD): ca. 670 x 425 x 45mm / 761 x 474 x 173mm (met flightcase)
Gewicht: ongeveer 9,4 kg / 21 kg (met flightcase) (24,9 kg transportgewicht)
###
1x Lilliput BM281-4KS
1x Opvouwbaar zonnescherm
1x Flightcase
1x 15V/4A DC Adapter
2x Strap voor adapter
1x Batterij mount beugel
2x Base Bracket
1x V-Mount
1x Tally connector kabel
1x handleiding
Key Features
4 x SDI Outputs, Single/Dual/Quad-Link
Supports up to DCI 4K60 Resolution
Outputs Preset & Custom Test Patterns
7" 1280 x 800 IPS Display
Color Temperature & Grayscale Testing
8-/16-Channel Embedded AES/EBU Audio
BNC Reference Input, SFP Module Slot
LAN Control Port/Windows Software
Built-In Battery/External Power Supply
The 12G-SDI Pattern Generator from Lilliput enables you to test the color temperature and grayscale of your monitor using a variety of preset patterns or custom pictures based on RGB or YCbCr color spaces. It features a LAN port, a reference input, two USB ports, and four SDI (BNC) outputs supporting video resolutions up to DCI 4K60. An SFP slot is also provided for installing an optional SFP module.
Preset & Imported Patterns
Use to test your monitor's color temperature and grayscale accuracy
Various patterns types including color bars, monochrome, and customized patterns
Create custom color picture in RGB or YCbC color spaces
Use preset test patterns or import pictures
Signal Compatibility
Supports SD/HD/3G/6G/12G-SDI signals
Supports SDI and fiber signals (optional module) up to DCI 4K60
Raster, refresh, and sampling options
Audio Monitoring
Advanced audio monitoring
Monitor up to 16-channel embedded AES/EBU audio
-60 dB to 0 dB range
20 Hz to 20 kHz frequency
Off, On, All Off, and All On switch options
Reference & Timecode
Reference input syncs frames to ensure simultaneous input and output
Supports and displays LTC (Linear Timecode) and VITC (Vertical Interval Timecode) timecode
User Functions
Supports more than 100 user-definable shortcut functions
Rugged Design
Metal housing with detachable rubber bumpers will stand up to repeated use
Power Options
The built-in battery lasts up to 2.5 hours
Can be powered continuously using the included power supply
In the Box
Lilliput 12G-SDI Test Signal Generator & Audio Monitor
12V, 3A AC Power Adapter
2 x Silicone Rubber Bumper
Waterproof Hard Case
Key Features
For Industrial HMI Applications
Full HD 1080p Native Resolution
10-Point Capacitive Touch
IP65-Rated Water & Dust Resistant
1000 nits of Brightness
Auto Dimming
Built-In Stereo Speakers
HDMI, VGA & Composite Video Inputs
3.5mm Audio Input & Headphone Out
Industrial-Grade Aluminum Housing
Designed for HMI applications, the 21.5" Full HD Touchscreen Industrial Display from Lilliput can be used as a solution for a variety of situations within many industries. Some examples include various aspects of the medical field, at AI-equipped production facilities, within smart locker installations, or as part of self-service kiosks. The 10-point capacitive touchscreen can be utilized as an information display or interactive interface for both workers and guests, depending on how it's used. The display panel is a generous 21.5" in size, delivers a crisp and detailed 1080p image, and can handle outdoor usage with IP65-rated dust and water resistance.
###
Display
Size
21.5"
Panel Type
LCD
Aspect Ratio
16:9
Display Orientation
Landscape
Resolution
1920 x 1080
Maximum Brightness
1000 nits / cd/m2
Contrast Ratio
1000:1
Refresh Rate
60 Hz
Viewing Angle (H x V)
178 x 178°
Pixels Per Inch (ppi)
103 ppi
Surface
Touchscreen Technology
Capacitive
Multi-Touch Points
10
Video
TV Tuner
No
Connectivity
Inputs
Rear:1 x HDMI (1.4)1 x DE-15/DB-15 (VGA)1 x RCA (Composite)1 x 1/8" / 3.5 mm
Outputs
Rear:1 x 1/8" / 3.5 mm (Analog Audio)
USB I/O
Rear:2 x USB-A Unspecified Version
Ethernet Ports
None
Speaker
Built-In Speakers
Yes, 2
Speaker Configuration
2-Channel
Hardware
Media Card Reader
None
Environmental
Operating Temperature
32 to 82°F / 0 to 50°C
Storage Temperature
-4 to 140°F / -20 to 60°C
Electrical
Power Consumption
Typical: < 37.0 W
Packaging Info
Package Weight
21.045 lb
Box Dimensions (LxWxH)
26.3 x 19.4 x 5.7"
Key Features
1920 x 1080 Full HD Resolution
HDMI, VGA, and RCA Composite Inputs
1000 nits Brightness
1000:1 Static Contrast Ratio
160° Viewing Angles
Integrated Speakers
IP64 Dust & Water Resistant
VESA 75 x 75 & 100 x 100mm Mounting
Metal Construction
Optimized for Industrial Applications
Bring easy visibility to industrial environments with the 15.6" TK1560/T Touchscreen Specialty Monitor from Lilliput. Featuring a metal construction and IP64 dust and water resistance, this monitor is optimized for industrial applications. The 15.6" LCD panel features 160° viewing angles, a 1000:1 static contrast ratio, and 1000 nits of brightness for accurate views. Connect to video sources via HDMI, VGA, and RCA composite inputs; integrated speakers provide onboard audio, while a 3.5mm aux port can be used to connect headphones. VESA 75 x 75 and 100 x 100mm mounting patterns allow this monitor to be used with compatible third-party mounts or stands for versatile deployment.
Industrial-Grade Screen
This monitor's industrial-grade screen ensures accurate color reproduction as well as a 1000 nits brightness, making it suitable for indoor and outdoor applications.
15.6" Touchscreen
Get detailed, interactive views with a 15.6" touchscreen that supports 10-point gestures and boasts a 1000:1 static contrast ratio for crisp on-screen images. Furthermore, 160° horizontal and vertical viewing angles allow for easy visibility, even at extreme angles.
Ports Aplenty
Choose between HDMI, VGA, and RCA composite inputs; connect sound components via 3.5mm audio-in and headphone-out ports.
IP64 Dust and Water Resistance
The front panel delivers IP64 dust and water resistance for easy deployment in demanding environments.
Secure Connectivity
A cable clamp allows the HDMI input cable to be fixed to the back of the monitor, preventing it from coming loose due to vibrations in industrial applications.
###
Display
Size
15.6"
Panel Type
LCD
Aspect Ratio
16:9
Resolution
1920 x 1080
Maximum Brightness
1000 nits / cd/m2
Contrast Ratio
1000:1
Viewing Angle (H x V)
160 x 160°
Surface
Touchscreen Technology
Capacitive
Multi-Touch Points
10
Video
TV Tuner
No
Connectivity
Inputs
Bottom:1 x HDMI (1.4)1 x DE-15/DB-15 (VGA)1 x RCA (Composite)1 x 1/8" / 3.5 mm
Outputs
Bottom:1 x 1/8" / 3.5 mm (Analog Audio)
USB I/O
Bottom:1 x USB-A Unspecified Version (Touchscreen Control)
Ethernet Ports
None
Speaker
Built-In Speakers
Yes
Hardware
Media Card Reader
None
Environmental
Operating Temperature
-4 to 140°F / -20 to 60°C
Storage Temperature
-22 to 158°F / -30 to 70°C
Electrical
Power Consumption
Maximum: < 24.5 W
Packaging Info
Package Weight
9.175 lb
Box Dimensions (LxWxH)
18.2 x 15.2 x 4.2"
Livestream your next production while simultaneously monitoring it with the T5U 5" Livestreaming On-Camera Touchscreen Monitor from Lilliput, a compact 5" IPS 1920 x 1080 display packed with features, including the ability to livestream without the need for other devices. The HDMI 2.0 input supports up to DCI 4K60, and the monitor automatically displays in Full HD with a brightness of 400 nits and a 1000:1 contrast ratio on its user-friendly capacitive touchscreen. A USB port allows you to send a live feed up to 1080p to a computer, as well as load LUTs and perform firmware updates.
When the monitor is connected to a computer, your livestreaming software will recognize it as it would with a webcam, giving you the flexibility to stream to any desired platform, such as Skype, Facebook, YouTube, Twitch, Periscope, Zoom, and many more. The wide color space support includes 98% DCI-P3 and 131% Rec.709, with 17 default 3D-LUT modes available onboard and up to six user LUTs that can be loaded into the unit via USB. A dual-purpose mounting plate handles both Canon LP-E6 and Sony-type NP-F series batteries, and a sun hood and shoe mount adapter are included.
Two-Finger Zoom
The touchscreen function supports two-finger zoom-in and zoom-out of the image.
Multiple False Color Modes
Default, Spectrum, ARRI, and RED modes are supported.
Interchangeable Battery Plates
L-Series and LP-E6 type battery plates are included.
Mounting Options
A 1/4"-20 mounting thread accommodates the included ball shoe mount.
Monitoring Tools
Analyze the incoming video signal with built-in video monitoring tools to achieve correct exposure, focus, and color balance. Built-in functions include:
Timecode display
Pixel zoom
Pixel-to-pixel
Audio level meters
Check exposure
Check field
Focus peaking
False color
Histogram
Zebra
Color bars
Image flip
###
Display
Panel Type
IPS-Type LCD
Display Size
5.0" / 12.7 cm
Resolution
1920 x 1080
Aspect Ratio
16:9
Viewing Angle
Horizontal: 170°Vertical: 170°
Touchscreen
Yes
Maximum Brightness
400 nits / cd/m2
Contrast Ratio
1000:1
HDR Compatibility
Hybrid Log Gamma
Pixels Per Inch (ppi)
441 ppi
Color Gamut
98% DCI-P3131% Rec. 709
Image Controls
Check Field, False Color, Focus Peaking, Image Flip, Pixel-to-Pixel Zoom, Screen Markers, Waveform
Video I/O
1 x HDMI 2.0 Input
Audio I/O
1 x 1/8" / 3.5 mm Headphone Output
Built-In Speaker
1
Power I/O
1 x Barrel Input
Other I/O
1 x USB-A 2.0 Input/Output
Media/Memory Card Slot
None
Wi-Fi
None
Format Support
Video Format
HDMIUHD 4K: 60/50/30/25/241080p: 60/50/30/25/241080i: 60/50720p: 60/50/30/25/24USB1080p720p576p480p
Gamma Curve
ARRI Log C, Canon Log, DCI-P3, HDR-HLG, JVC J-Log, Panasonic V-Log, Sony S-Log 2
Power
DC Input Power
7 to 24 VDC at 1 A
Battery Type
1 x LP-E6 or L-Series
Power Consumption
7 W (Maximum)
Mounting
Mounting
1 x 1/4"-20 Female
Environmental
Environmental Protection
None
Operating Temperature
32 to 122°F / 0 to 50°C
Storage Temperature
14 to 140°F / -10 to 60°C
General
Dimensions
5.2 x 3.4 x 0.7" / 132 x 86 x 18.5 mm
Weight
6.7 oz / 190 g
Packaging Info
Package Weight
1.395 lb
Box Dimensions (LxWxH)
6.9 x 5.1 x 2.8"
Key Features
1920 x 1200 LCD 7" Screens
For Video Wall or Broadcast Truck
3G-SDI and HDMI Inputs/Outputs
Supports up to 1080p SDI and 2160p HDMI
Load Custom 3D LUTs via USB
Support for HDR
Ethernet Input for Control
1 x Headphone Jack per Display
Monitor two different cameras simultaneously for your next live broadcast using the 1920 x 1200 resolution Lilliput Dual 7" Rackmount Monitors with 3G-SDI & HDMI, which can be installed in a video wall or broadcast truck thanks to its 3 RU form factor. Various video assist functions such as false color, histogram, and timecode are independently available for each monitor, allowing production managers to easily and precisely analyze image quality. Custom 3D-LUTs can be uploaded using the USB-A input for accurate color comparison.
Two 3G-SDI and two HDMI inputs support video up to 1080p60 and 2160p60 respectively. There are also two 3G-SDI and two HDMI loop outputs, which expand your display options. Control for both monitors is possible with the onboard buttons or using the LAN input and a connected computer to adjust settings like picture, marker, function, source, audio, and tally light. Audio can be monitored via the two 3.5mm headphone jacks.
3D-LUTs
Supports .cube files uploaded via the USB-A input
Built-in 17 default logs and six user logs
Makes color calibration of previous shooting more intuitive
HDR
When activated, the display reproduces greater dynamic of luminosity
Allows lighter and darker details to be more visible
Supports ST-2084 300, 1000, 10,000, and HLG
Video Assist Functions
Check field
Color bar
Exposure
False color
Freeze
Histogram
Level meter
Markers
Peaking
Pixel to pixel
Pixel zoom
Timecode
###
Display
Panel Type
LCD
Display Size
7.0" / 17.8 cm
Resolution
1920 x 1200
Aspect Ratio
16:10
Viewing Angle
Horizontal: 160°Vertical: 160°
Touchscreen
No
Maximum Brightness
400 nits / cd/m2
Contrast Ratio
2000:1
HDR Compatibility
Hybrid Log Gamma
Pixels Per Inch (ppi)
323 ppi
Image Controls
Check Field, False Color, Focus Peaking, Histogram, Pixel Zoom, Pixel-to-Pixel Zoom, Screen Markers
Video I/O
2 x BNC (3G-SDI) Input2 x BNC (3G-SDI) Loop Output2 x HDMI 2.0 Input2 x HDMI 2.0 Loop Output
Audio I/O
2 x 1/8" / 3.5 mm Headphone Output
Built-In Speaker
None
Power I/O
1 x Barrel (1.5 A / 24 VDC) Input
Other I/O
1 x RJ45 (LAN) Input1 x DE-15/DB-15 (Tally) Input1 x USB-A
Media/Memory Card Slot
None
Wi-Fi
None
Format Support
Video Format
SDI1080p: 60/50/30/25/241080PsF: 30/25/241080i: 60/50720p: 60/50HDMIDCI 4K: 60/50/30/25/241080p: 60/50/30/25/241080i: 60/50720p: 60/50
Gamma Curve
ARRI Log C, Canon Log, JVC J-Log, Panasonic V-Log, Sony S-Log 2, Sony S-Log 3
Video Standard Compliance
SMPTE ST-2084
Power
DC Input Power
10 to 24 VDC
Operating Current
1.5 A
Power Consumption
16 W
Mounting
Rack Form Factor
3 RU
Environmental
Operating Temperature
32 to 82°F / 0 to 50°C
Storage Temperature
-4 to 158°F / -20 to 70°C
General
Material of Construction
Metal
Dimensions
18.9 x 5.2 x 1.2" / 480 x 131.6 x 29.3 mm
Weight
4.9 lb / 2.2 kg
Packaging Info
Package Weight
6.26 lb
Box Dimensions (LxWxH)
23.6 x 7.5 x 3.7"
The Dual 7" 3U 3G-SDI Monitor Rackmount from Lilliput features two 7" IPS panels with a native resolution of 1280 x 800. The monitors are equipped with a 3G-SDI connectivity and can be mounted in a 3U rack system or events managers board. They are fitted with a 2674 processing chip that gives a greater range of input frequencies. This DSLR optimized system is compatible with professional multimedia and video equipment.
Compatible with Black Magic Pocket Cinema camera
Twin 7" IPS monitors with widescreen aspect
800:1 contrast ratio gives accurate color representation
Sunlight readable with a 400 cd/m2brightness output
DSLR optimized system
3G SDI, HDMI, component (YPbPr), and composite connectivity
###
Screen Size (Diagonal)
2 x 7" (17.8 cm)
Screen Type
IPS LED screen
Aspect Ratio
16:9
Native Resolution
1280 x 800
Maximum Resolution
1920 x 1080
Viewing Angle
178°/178°
Brightness
400 cd/m2
Contrast Ratio
800:1
Video Inputs
2 x 3G-SDI2 x HDMI2 x YPbPr2 x Composite2 x Tally connection1 x USB mini
Video Outputs
2 x 3G-SDI2 x HDMI2 x YPbPr2 x Composite
Input Voltage
12 VDC
Operating Temperature
-4 to 140°F (-20 to 60°C)
Dimensions
5.3 x 19 x 1" (13.4 x 48.3 x 2.5 cm)
Weight
6.4 lb (2.9 kg)
Packaging Info
Package Weight
6.85 lb
Box Dimensions (LxWxH)
23.4 x 7 x 3.8
Key Features
17.3" 1920 x 1080 Resolution Monitor
Slim, Space-Saving 1 RU Design
Up to UHD 4K60 HDMI, Up to 1080p60 SDI
HDMI 2.0 In/Out, 3G-SDI In/Out
HDR Support, Load Custom 3D LUTs
170° H/V Viewing Angle
300 cd/m² Bright, 800:1 Contrast
Remote Control via RJ45 Port & Computer
The RM-1731S Pullout Rackmount 3G-SDI/HDMI Monitor from Lilliput is a 17.3" broadcast monitor with a resolution of 1920 x 1080. It features a slim, space-saving 1 RU pullout rackmount design and support for up to 1080p60 video input via 3G-SDI and up to UHD 4K60 input via HDMI. The 17.3" IPS panel provides an 800:1 contrast ratio, a viewing angle of 170°, and 300 cd/m² brightness. The RM-1731S monitor features a 3G-SDI input and loop-out, an HDMI 2.0 input and loop-out, a USB-A port for LUT upload, and an RJ45 port for remote control using your computer.
This monitor supports multiple HDR color spaces and the ability to load custom 3D LUTs for quick access to a variety of color reference options. A 12 VDC power supply and a tally connector are included with the monitor.
Slim, Space-Saving Design
A pullout space-saving design enables the RM-1731 monitor to use a 1 RU space on your cabinet or truck rackmount.
Interface
Interfaces include a 3G-SDI input and loop-out, an HDMI 2.0 input and loop-out, a USB-A port for uploading built-in or custom LUTs, and an RJ45 port for remote control via your computer.
Monitoring Tools
Peaking, Check Field, Image Freeze
Pixel-to-Pixel Zoom, False Color, Exposure
Vectorscope, Histogram
Anamorphic De-Squeeze, Screen Markers
HDR, Color Space
Color Temperature Adjustment
Image Flip, H/V Delay
Audio Metering
HDR and 3D LUTs
When HDR is activated, the display reproduces a greater dynamic range of luminosity.
Enables colors and lighter and darker details to be displayed more clearly.
Supports HLG and ST2084 300/1000/10,000 HDR.
You can use any of the 17 default logs or load up to six of your own custom LUTs in .cube format via the USB port.
Audio
This monitor outputs embedded audio via a 3.5mm headphone jack and two speakers.
Provides channel selection and onscreen audio metering.
Assignable Buttons
Using the four assignable buttons on the front panel, you can quickly turn any four essential monitoring tools on and off without venturing into the monitor's menu system.
Remote Control
Use the RJ45 port to connect to your laptop or computer for remote control.
###
Display
Display Size
17.3" / 43.9 cm
Resolution
1920 x 1080
Aspect Ratio
16:9
Viewing Angle
Horizontal: 170°Vertical: 170°
Touchscreen
No
Maximum Brightness
300 nits / cd/m2
Contrast Ratio
800:1
HDR Compatibility
Hybrid Log Gamma
Pixels Per Inch (ppi)
127 ppi
Image Controls
False Color, Focus Peaking, H/V Delay, Histogram, Image Flip, Pixel Zoom, Vectorscope, Waveform
Inputs / Outputs
Video I/O
1 x BNC (3G-SDI) Input1 x HDMI 2.0 Input1 x BNC (3G-SDI) Loop Output1 x HDMI 2.0 Loop Output
Embedded Audio
HDMI: 8-ChannelSDI: 16-Channel
Audio I/O
None
Built-In Speaker
2
Power I/O
1 x Barrel (12 VDC) Input
Other I/O
1 x RJ45 (LAN)1 x DE-15/DB-15 (Tally)1 x USB-A (LUT Upload)
Media/Memory Card Slot
None
Wi-Fi
None
Bluetooth
None
Mobile App Compatible
*As of March, 2023: Check with manufacturer for the most up-to-date compatibility
Format Support
Gamma Curve
ARRI Log C, Canon Log, JVC J-Log, Nikon N-Log, Sony S-Log 2, Sony S-Log 3, V-Log
Video Standard Compliance
SMPTE ST-2084
Power
DC Input Power
10 to 24 VDC
Power Consumption
14 W
Mounting
Rack Form Factor
1 RU
Mounting
None
Environmental
Environmental Protection
None
Operating Temperature
32 to 122°F / 0 to 50°C
Storage Temperature
-4 to 140°F / -20 to 60°C
General
Dimensions
19 x 1.7 x 20" / 482.5 x 44 x 507.5 mm
Weight
19.6 lb / 8.9 kg
Packaging Info
Package Weight
24.585 lb
Box Dimensions (LxWxH)
26.4 x 22.7 x 6.3"
The Lilliput RM-1731-S is a 17.3 inch LCD Rackmount Monitor with full HD resolution (1920 x 1080 pixels) and 8-bit color depth.This pull-out monitor is suitable for installation in 19 inch racks and only takes up 1 height unit (HU). On the back there are 3G-SDI, HDMI and DVI connections.
Characteristics: Resolution: Full HD (1920x1080) Picture format: 16: 9 Color system: PAL / NTSC Brightness: 300 cd / m² Contrast ratio: 800: 1 Viewing angle (H / V): 170 ° / 170 ° Two built-in speakers (L / R) Timecode Vector Scope Waveform Monitor peaking False Color histogram exposure Check Field Color bar Image Flip For installation in 19 inch rack - 1U
Connections:1 x HDMI input / output loop1 x headphone jack, 3.5 mm stereo jack1 x Analog Audio Stereo (2x RCA) input1 x tally input1 x DC power supply 10 volts to 24 voltsIncluded:12V 2A DC adapter
With eight 2" monitors in a 1 RU rack-mountable chassis, the Lilliput RM-0208S is designed for monitoring multiple 3G-SDI sources within a compact form factor, suiting it for use in mobile trucks, live broadcasts, and for on-site use. Each LCD screen has a resolution of 640 x 240, and features SDI equalization and re-clocking. The RM-0208S model also offers 3G-SDI outputs for each LCD, enabling you to loop the signals out to additional devices.
DIP switch“activated, on-screen level metering supports up to two audio tracks per monitor. Use your laptop and downloadable software to control monitor functions, display timecode, and label each monitor. Power is provided by an included AC adapter.
Features
Eight 2" 640 x 240 LCD screens
One 3G-SDI input and output per screen;
2 RU rack-mountable design
On-screen labeling provides quick and easy signal identification
Timecode and audio-level metering display
SDI equalization and re-clocking
Windows and Mac RS-422 laptop control with downloadable software
In the Box
Lilliput 8x2" 1RU Rackmount Monitors With SDI Equalization and Re-Clocking
15V DC Adapter
CD